Intel 4.5GHz & 5GHz LinX Stable Club

[radaja]

nickless,very nice
thats the batch i wanted.hows the IMC on your cpu?
my new one is great at low vcore OC.s but seems to have
a crappy IMC.cant seem to run ddr3-2000

[nickless]

Tank's, your CPU is very nice too. I haven't tested yet, because I have it only from two days and the settings of the mobo now are completely different compare to previous CPU. First aim was Intel 4.5GHz LinX Stable Club . Now come the other tests .

[PolRoger]

Here's my entry....

Gigabyte GA-X58-UD3R Rev 2
Intel i7 950 FPO/Batch 3020A998
3 x 1GB OCZ Platinum PC3-12800 CL7
OCZ GameXStream1010W PSU
Prolimatech Megahalems RevB 1 x NMB-Mat 120mm Fan
2 x HD3870X2

First recent batch #30XX... i7 950 I've seen in the LinX 4.5 GHZ club (on air too.)

Found a nice I7-950

wiener007 | Core i7 950 [4C 4T] @ 4519.7 MHz | 1.303 | Rampage III Extreme | Water | 3849B099

Very nice early batch 3849Bxxx i7 950... I think that is one of the lowest bloomfield vcore (u/water) I've seen for 4.5GHz.

I noticed that the link states 4C/4T but the screenshot shows 4C/8T.

[C-N]

First recent batch #30XX... i7 950 I've seen in the LinX 4.5 GHZ club (on air too.)

Thanks, Its my 1st X58/i7 build moving on from the DFI P45 & I'm having a lot of fun with it.
.

[zalbard]

The OP should be up to date!
Welcome to the new members!

[wiener007]

First recent batch #30XX... i7 950 I've seen in the LinX 4.5 GHZ club (on air too.)




Very nice early batch 3849Bxxx i7 950... I think that is one of the lowest bloomfield vcore (u/water) I've seen for 4.5GHz.

I noticed that the link states 4C/4T but the screenshot shows 4C/8T.

Thanks PolRoger, you are correct.

[CryptiK]

Wiener that is epic vcore. Congrats on that CPU.

[OLDcomer]

@zalbard:

Please set this label to my previous submission:
OLDcomer | C2Q Q9650 [4C] @ 4499.9MHz | 1.456 | ASUS P5E X38 rev. 1.03@Rampage Formula | Water | L826B006

And here is my new submission with the same CPU and cooling but different board:

OLDcomer | C2Q Q9650 [4C] @ 4499.9MHz | 1.408 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | L826B006



And it's time for the first E5200 submission in this thread:

OLDcomer | C2D E5200 [2C] @ 4500.1MHz | 1.504 | Gigabyte GA-EP45-UDP rev. 1.0 | Water | Q831B293

[wiener007]

Thanks Cryptik,
I tried some chips before i found that Batch.

Moved to the Gulftown world today.
4812 MHz, i think that chip is also not so bad.

wiener007 | Core I7 970 [6C 12T] @ 4812.9 | 1.515 | Rampage III Extreme | Water | 3009F989

[Krautmaster]

Krautmaster | Core i7 990X ES | 6C 12T |4600,0 | 1,440 | DFI UT X58 | Water | -

[miahallen]

Both of these ^^^

[jcool]

I may not be able to pass LinX at 4.5Ghz with both CPUs (unfortunately, my 2nd CPU is a bit of a dog - 1st one can do 4,5 @ 1,38V) but I can still own you guys via Gflop rating

By the way, I still get higher Gflops rating AND CPU core temps when running only 12 threads (despite having HT on). I am using the latest linpack libraries.
Is this still the case for single socket Hexas? Or do you get higher temps by running on all Threads there? Thanks

[godzzila]

I may not be able to pass LinX at 4.5Ghz with both CPUs (unfortunately, my 2nd CPU is a bit of a dog - 1st one can do 4,5 @ 1,38V) but I can still own you guys via Gflop rating

By the way, I still get higher Gflops rating AND CPU core temps when running only 12 threads (despite having HT on). I am using the latest linpack libraries.
Is this still the case for single socket Hexas? Or do you get higher temps by running on all Threads there? Thanks

Yes GFLOPS is because memory , isn't it? or two CPUs, but still 12 threads in LinX.
But niceee 4.5G 1.38V

[dr_dx]

I may not be able to pass LinX at 4.5Ghz with both CPUs (unfortunately, my 2nd CPU is a bit of a dog - 1st one can do 4,5 @ 1,38V) but I can still own you guys via Gflop rating

By the way, I still get higher Gflops rating AND CPU core temps when running only 12 threads (despite having HT on). I am using the latest linpack libraries.
Is this still the case for single socket Hexas? Or do you get higher temps by running on all Threads there? Thanks

I get higher temps and lower performance with HT on.

[owikh84]

owikh84 | Core i7 980X [6C 6T] @ 4514.0MHz | 1.399 | EVGA Classified E760 | Water | 3041A489

[Bigchrome]

Hi guys, been out of the overclocking game for a while now and I'm working at getting my e8600 stable at 4.5 again. For some reason it doesn't seem to do it at the same settings I used to have (If my memory serves me well). I've gotten to 20+ mins in linx before I manually stop it now but I'm getting worrying temps, 80c at 4.5Ghz, 1.4v with watercooling. Is this normal or should I be concerned? I never remember it running this hot

[C-N]

DFI X58 Still got it!!!

DFI LP UT X58-T3E8H
Intel i7 930 FPO/Batch 3951A722
3 x 1GB OCZ Platinum PC3-12800 CL7
OCZ GameXStream1010W PSU
Prolimatech Megahalems RevB 1 x NMB-Mat 120mm Fan
1 x HD3870X2
Windows 7 64 - Bit

Half Way



20 X Done



This chip makes 4.5GHz with 1.408 CPU-Z volts on my Giga x58 but runs about 80oC!!! on a cold day...

.

[zalbard]

Very nice, C-N! Good job!
Is that really 1.5V on air?
Btw, I'll be away for the weekend, expect me to update the OP on Monday.

[radaja]

DFI X58 Still got it!!!
This chip makes 4.5GHz with 1.408 CPU-Z volts on my Giga x58 but runs about 80oC!!! on a cold day...

i noticed my gigabytes run with less vcore than my E760 and my old dfi x58 too.
and on 775 it seems asus maxII and REX needed more vcore than my UD3R

great OC C-N

[SimpleTECH]

zalbard, can you update the LinX link? Intel updated their Linpack library (10.3.0.003).

http://www.mediafire.com/?zuax5c5rhd8j6wm

Thanks!

[the_real_7]

4.5 late bloomer

Hey better late than never
Got my I7 920 @ to 4515 . . . HT off at 7 7 7 20 rock solid stable . . .
will continue to tweak a bit over next few weeks

[C-N]

Very nice, C-N! Good job!
Is that really 1.5V on air?
Btw, I'll be away for the weekend, expect me to update the OP on Monday.

Yup 1.5v on air

Have a great weekend.

i noticed my gigabytes run with less vcore than my E760 and my old dfi x58 too.
and on 775 it seems asus maxII and REX needed more vcore than my UD3R

great OC C-N

My Giga runs with way less core but far more heat, I was going to mention this on the Giga thread but it appears to me the Giga pumps a lot of current into the chip to keep the vcore down where as this DFI doesnt hence needing more vcore. This same chip came out of my Giga with light brown scorch marks on the under side of the chip!!!! I would suggest anyone running 4.5GHz on the Giga check there chips before its to late!!!

Update... I also have a 950 that run high speed in the Giga & it also has some marks but not quite as large as the 930 see pic.

.

[the_real_7]

My Giga runs with way less core but far more heat, I was going to mention this on the Giga thread but it appears to me the Giga pumps a lot of current into the chip to keep the vcore down where as this DFI doesnt hence needing more vcore. This same chip came out of my Giga with light brown scorch marks on the under side of the chip!!!! I would suggest anyone running 4.5GHz on the Giga check there chips before its to late!!!

Update... I also have a 950 that run high speed in the Giga & it also has some marks but not quite as large as the 930 see pic.

wow those burn marks are scary , what giga where you running with what voltage the Gigabyte GA-X58A-UD3R ?

[C-N]

wow those burn marks are scary , what giga where you running with what voltage the Gigabyte GA-X58A-UD3R ?

This one & another 950 @ 1.425 CPU-Z vcore

http://www.xtremesystems.org/forums/...postcount=1018

.

[radaja]

4.5 late bloomer

Hey better late than never
Got my I7 920 @ to 4515 . . . HT off at 7 7 7 20 rock solid stable . . .
will continue to tweak a bit over next few weeks

congratulations,your in the club
good luck with the tweaking and have fun

Yup 1.5v on air

Have a great weekend.



My Giga runs with way less core but far more heat, I was going to mention this on the Giga thread but it appears to me the Giga pumps a lot of current into the chip to keep the vcore down where as this DFI doesnt hence needing more vcore. This same chip came out of my Giga with light brown scorch marks on the under side of the chip!!!! I would suggest anyone running 4.5GHz on the Giga check there chips before its to late!!!

Update... I also have a 950 that run high speed in the Giga & it also has some marks but not quite as large as the 930 see pic.

.

i heard they had vtt issues with the first x58's,but this vcore and power thing is scary,thanks for the headsup