4.65Ghz on above dew point water - Xeon W3680 Batch# 3013A739


My goal was to reach 100GFlops.








Here's a template:

Code:
GIGABYTE GA-X58A-UD7 rev2

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 30
CPU Frequency ........................(GHz): 4.65
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Disabled
CPU Cores Enabled..........................: All
CPU Multi Threading........................: Disabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Disabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Disabled

QPI Clock Ratio............................: x36
QPI Link Speed........................(GHz): 5.58
Uncore Clock Ratio.........................: x21
Uncore Frequency......................(MHz): 3255
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 155
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1860
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800
PCI Express Clock Drive (mV)...............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1860
Performance Enhance........................: Standard
DRAM Timing Selectable (SPD)...............: Quick
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: 6
Rank Interleaving..........................: 4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 8
tRCD.......................................: 8
tRP........................................: 8
tRAS.......................................: 22
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: 80
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: -
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: L2
CPU Vcore..................................: 1.5375
xDynamic Vcore(DVID).......................: 0
QPI/VTT Voltage............................: 1.415
CPU PLL....................................: 1.4
>>> MCH/ICH
PCIE.......................................: Auto [1.5]
QPI PLL....................................: Auto [1.1]
IOH Core...................................: Normal [1.1]
ICH I/O....................................: Auto [1.5]
ICH Core...................................: Auto [1.1]
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: .75
Ch-A Data VRef.............................: .75
Ch-B Data VRef.............................: .75
Ch-C Data VRef.............................: .75
Ch-A Address VRef..........................: .75
Ch-B Address VRef..........................: .75
Ch-C Address VRef..........................: .75

> Miscellaneous Settings [Press Enter]

Isochronous Support........................: Enabled
Virtualization Technology..................: Disabled

GOOC 2010 WWF Rev.2 Settings Only

GOOC Lean Mode.............................: On
GOOC extreme clock.........................: Enabled
GOOC extreme temp..........................: Disabled