Intel 4.5GHz & 5GHz LinX Stable Club

[zalbard]

Zalbard...the OP still incorrectly lists my 2nd entry as 2C 2T

I blame Copy-Paste!
Fixed.

Edit: 1000th post of the thread!

[0Ro!]

4,5G done on air, ambient temp 23c



batch #L938B402

[dr_dx]

4.65Ghz on above dew point water - Xeon W3680 Batch# 3013A739


My goal was to reach 100GFlops.








Here's a template:

GIGABYTE GA-X58A-UD7 rev2

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 30
CPU Frequency ........................(GHz): 4.65
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Disabled
CPU Cores Enabled..........................: All
CPU Multi Threading........................: Disabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Disabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Disabled

QPI Clock Ratio............................: x36
QPI Link Speed........................(GHz): 5.58
Uncore Clock Ratio.........................: x21
Uncore Frequency......................(MHz): 3255
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 155
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1860
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800
PCI Express Clock Drive (mV)...............: 900
CPU Clock Skew (ps)........................: 0
IOH Clock Skew (ps)........................: 0

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 12
Memory Frequency(MHz)......................: 1860
Performance Enhance........................: Standard
DRAM Timing Selectable (SPD)...............: Quick
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: 6
Rank Interleaving..........................: 4
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 8
tRCD.......................................: 8
tRP........................................: 8
tRAS.......................................: 22
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: 80
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: -
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................: Auto
Different Ranks............................: Auto
On The Same Rank...........................: Auto

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: L2
CPU Vcore..................................: 1.5375
xDynamic Vcore(DVID).......................: 0
QPI/VTT Voltage............................: 1.415
CPU PLL....................................: 1.4
>>> MCH/ICH
PCIE.......................................: Auto [1.5]
QPI PLL....................................: Auto [1.1]
IOH Core...................................: Normal [1.1]
ICH I/O....................................: Auto [1.5]
ICH Core...................................: Auto [1.1]
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: .75
Ch-A Data VRef.............................: .75
Ch-B Data VRef.............................: .75
Ch-C Data VRef.............................: .75
Ch-A Address VRef..........................: .75
Ch-B Address VRef..........................: .75
Ch-C Address VRef..........................: .75

> Miscellaneous Settings [Press Enter]

Isochronous Support........................: Enabled
Virtualization Technology..................: Disabled

GOOC 2010 WWF Rev.2 Settings Only

GOOC Lean Mode.............................: On
GOOC extreme clock.........................: Enabled
GOOC extreme temp..........................: Disabled

[radaja]

heres my newest cpu.it does 4502 w/1.32v in xp but win7 x64 required
a bump in vcore from 1.362v to 1.368v in bios.1.34v load is still awesome

i7-920 #3849B018
Gigabyte X58A-UD5
custom water w/AC


4.5GHz HT on 1.34v
http://valid.canardpc.com/show_oc.php?id=1446295

4502 HT on DDR3-1715 9-9-9-24 1t
20 run LinX 42m Prime95 Blend

[zalbard]

Good job, everyone!
Congrats on your golden batch chip, radaja! Took you a while to get one, eh?

[kup]

Where on earth did you find a batch like that?! I'd have thought they'd all be long gone by now...

[radaja]

Good job, everyone!
Congrats on your golden batch chip, radaja! Took you a while to get one, eh?

Thanks
well this is my fourth golden 920,and ive been trying to match my first one ever since i sold it.
it was another 3849B018 and i sold it only after playing with it for about 2 weeks and i didnt know
much about i7's then.it was and still is the best one for low volts ive seen.this one is close but still not the same

Where on earth did you find a batch like that?! I'd have thought they'd all be long gone by now...

i got it from someone at ocn who is also a great wellknown XS's member

[angelreaper]

Batch# 3013A652 Core i7 970. Cooling Thermalright Silver Arrow.




http://valid.canardpc.com/show_oc.php?id=1444923



Thermalright Silver Arrow and Intel I7 970 5ghz

[Church]

5GHz on air?! That's nuts

[miahallen]

Batch# 3013A652 Core i7 970. Cooling Thermalright Silver Arrow.

Nice

WAY better than my 970

[dr_dx]

Zalbard.....my cpu is a W3680 and what do I have to do to get past The Nemisis?

[zalbard]

Zalbard.....my cpu is a W3680 and what do I have to do to get past The Nemisis?

Fixed both... my bad. Will add the new submissions tomorrow once I am properly awake.

[dr_dx]

Fixed both... my bad. Will add the new submissions tomorrow once I am properly awake.

Thanks! And Thanks for taking great care of this thread!

Dr_DX

[dr_dx]

Trying to find the minimum proc speed while still hitting 100 GFlops stable in Linx.

[miahallen]

Trying to find the minimum proc speed while still hitting 100 GFlops stable in Linx.

Hummm....are you running with the latest binaries (look in the OP)...I was trying to hit 100Gflops last night, and was a little short at 5GHz

[Dekara]

My 1year old result

Dekara | C2D E8600 [2C] @ 4510MHz | 1.312 | DFI P45-T2RS Plus | Air | Q820A606

[dr_dx]

Hummm....are you running with the latest binaries (look in the OP)...I was trying to hit 100Gflops last night, and was a little short at 5GHz

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.

[C-N]

Here's my entry....

Gigabyte GA-X58-UD3R Rev 2
Intel i7 950 FPO/Batch 3020A998
3 x 1GB OCZ Platinum PC3-12800 CL7
OCZ GameXStream1010W PSU
Prolimatech Megahalems RevB 1 x NMB-Mat 120mm Fan
2 x HD3870X2

[SimpleTECH]

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.

Replace linpack_xeon32 and xeon64 with those in this package (newer, 10.2.6.015).

[miahallen]

Linx_0.64_10.2.5.013.zip

DL'd on 10/13/2010 from the link on the first page. It looks like it is the current version that the link points to.

Weird....that's the same I was using

Maybe because I was running single channel.....

Oh well, nice work anyhow

[dr_dx]

Weird....that's the same I was using

Maybe because I was running single channel.....

Oh well, nice work anyhow

Speaking of nice work, I greatly appreciate your Gulftown guide - it was a tremendous help.

[wiener007]

Found a nice I7-950

wiener007 | Core i7 950 [4C 8T] @ 4519.7 MHz | 1.303 | Rampage III Extreme | Water | 3849B099

[DomagojX]

wow, nice i7 950

[miahallen]

Speaking of nice work, I greatly appreciate your Gulftown guide - it was a tremendous help.

Ah, good to hear You're welcome

[nickless]

Here is my 5-th "new" Xeon W3520 :
4C 8T
batch# - 3845A935@4567MHz
mobo - RIIIE
cooling - water: EK-Supreme HF, MCP355, Magicool Xtreme III
vcore @ 1.376V