Page 48 of 53 FirstFirst ... 3845464748495051 ... LastLast
Results 1,176 to 1,200 of 1304

Thread: Quad socket board communitarian bulk buy

  1. #1176
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    UK
    Posts
    567
    A quick question for those of you using this Arima quad socket board, does it support windows server 2008 R2?

  2. #1177
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    It should in theory, but I haven't tried it. I'm planning on doing so when I get my heat sinks. Still haven't heard back from scan.

  3. #1178
    Xtremely High Voltage Sparky's Avatar
    Join Date
    Mar 2006
    Location
    Ohio, USA
    Posts
    16,040
    Once my pump is replaced I plan on trying it as well.
    The Cardboard Master
    Crunch with us, the XS WCG team
    Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64

  4. #1179
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Yeah just plug the six pin pcie in backwards. Its fine. And in theory I don't think windows works on this board because of EFI. But I'm sure one of you guys can figure it out I have faith on you. Now hurry up and get these rigs online we've almost caught up with easynews!
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  5. #1180
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    2008 R2 supports EFI.

  6. #1181
    Xtreme Enthusiast
    Join Date
    Jun 2010
    Location
    Bournemouth (UK)
    Posts
    786
    Cheers for clarifying that guys

    Anarki, will you need some of those eps connectors I linked?
    I can just add it to your bill

    Also, was it ever confirmed if the board has onboard raid? Just curious is all.
    Nymph - Xeon 5675 @ 4.1 w/ x2 680
    Ikaros - i7 920 w/ 275 - Build In Progress

    Long live LGA1366

  7. #1182
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Quote Originally Posted by Jacka View Post
    2008 R2 supports EFI.
    Oh good I didn't know that. I must have tried windows 7 that didn't work.
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  8. #1183
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    UK
    Posts
    567
    I jumped back a few pages and found this:



    So the board needs three 8pin EPS and one 6pin PCI-E connection? No 24pin ATX at all?

    If that is the case then Kryja please add two 8pin adaptors to my bill

    Also could someone please edit the very first post in this topic and put all the pictures of how to set up these monsters, so we don't have to go through all the pages. Many thanks.

  9. #1184
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    303
    I really need to hide from my gf now..


    Boy I really had to get them, but now I'm stuck with two 8347. Well, I guess I can build a lil rig and sell it at shool if it looks pimp

  10. #1185
    Xtreme Enthusiast
    Join Date
    Jun 2010
    Location
    Bournemouth (UK)
    Posts
    786
    Could always get one of these so they're not sitting idle;

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT
    Nymph - Xeon 5675 @ 4.1 w/ x2 680
    Ikaros - i7 920 w/ 275 - Build In Progress

    Long live LGA1366

  11. #1186
    (o.O)
    Join Date
    Jun 2008
    Location
    Ohio
    Posts
    1,285
    Just got an e-mail with this deal if anyone still needs a PS (I do)

    http://www.newegg.com/Product/Produc...-17171036-L04B

    $70 for 600W Single Rail
    Intel Core 2 Quad Q9450 Yorkfield @ 3.2GHz | Asus P5Q Deluxe mobo | 2x OCZ Reaper HPC 4GB (2 x 2GB) DDR2 1066 (PC2 8500) | Sapphire 4870x2 | Western Digital VelociRaptor 300GB 10k RPM | Intel 120GB SSD | Western Digital Caviar SE16 640GB 7200 RPM | Hitachi 2TB 7200 RPM | PCP&C 750W Power Supply |Cooler Master HAF932 | Windows 7 64-bit | Dell ULTRASHARP 2408WFP 24-inch Widescreen Flat Panel Monitor

    Join Us in the XS World Community Grid Forum & Help Fight Cancer and Other Diseases

  12. #1187
    Xtreme Addict
    Join Date
    Jul 2005
    Posts
    1,646
    I've popped several Coolermaster power supplies that weren't even being stressed at the time. I don't trust them.

  13. #1188
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Wow and modular too. That's a pretty good deal
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  14. #1189
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    303
    Quote Originally Posted by Kryja View Post
    Could always get one of these so they're not sitting idle;

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT
    It says : - Supports AMD Opteron Socket F 2000 Series Dual core and Quad core Processors

    I don't have the time atm to look further into that but the support is only limited by bios and not by physical limitations? In theory, can it work?

  15. #1190
    Xtreme Addict
    Join Date
    Jul 2005
    Posts
    1,646
    8347s work fine on the NM460 boards, as long as you have the current BIOS installed. I've generated a couple millions points on that exact setup.

  16. #1191
    Xtreme Enthusiast
    Join Date
    Jun 2010
    Location
    Bournemouth (UK)
    Posts
    786
    pawmadsen also used a dual board which I think is the same one I linked

    http://www.xtremesystems.org/forums/...&postcount=487
    Nymph - Xeon 5675 @ 4.1 w/ x2 680
    Ikaros - i7 920 w/ 275 - Build In Progress

    Long live LGA1366

  17. #1192
    Back from the Dead
    Join Date
    Oct 2007
    Location
    Stuttgart, Germany
    Posts
    6,602
    Back from vacation
    Did you boys get your boards all right? Up and running yet?
    World Community Grid - come join a great team and help us fight for a better tomorrow![size=1]


  18. #1193
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    They arrived perfectly!

    Just waiting on some heat sinks and I can have them up and running.

  19. #1194
    (o.O)
    Join Date
    Jun 2008
    Location
    Ohio
    Posts
    1,285
    I get my CPU's today, but I have yet to get the ram I need..... hopefully soon!
    Intel Core 2 Quad Q9450 Yorkfield @ 3.2GHz | Asus P5Q Deluxe mobo | 2x OCZ Reaper HPC 4GB (2 x 2GB) DDR2 1066 (PC2 8500) | Sapphire 4870x2 | Western Digital VelociRaptor 300GB 10k RPM | Intel 120GB SSD | Western Digital Caviar SE16 640GB 7200 RPM | Hitachi 2TB 7200 RPM | PCP&C 750W Power Supply |Cooler Master HAF932 | Windows 7 64-bit | Dell ULTRASHARP 2408WFP 24-inch Widescreen Flat Panel Monitor

    Join Us in the XS World Community Grid Forum & Help Fight Cancer and Other Diseases

  20. #1195
    version 2.0
    Join Date
    Feb 2005
    Location
    Flanders
    Posts
    3,862
    Quote Originally Posted by Jacka View Post
    They arrived perfectly!

    Just waiting on some heat sinks and I can have them up and running.
    I thought there were some boards with 'custom pins' ? (love that phrase )

  21. #1196
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Yeah that was nkrader's way of making us feel better about five doa boards ha. What a smart a$$!! Lol
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  22. #1197
    Crunching For The Points! NKrader's Avatar
    Join Date
    Dec 2005
    Location
    Renton WA, USA
    Posts
    2,891
    Custom!

  23. #1198
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Speaking of the devil... lol
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  24. #1199
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    Quote Originally Posted by Jaco View Post
    I thought there were some boards with 'custom pins' ? (love that phrase )
    I was referring to the boards that jcool sent me from Germany.

  25. #1200
    Xtremely High Voltage Sparky's Avatar
    Join Date
    Mar 2006
    Location
    Ohio, USA
    Posts
    16,040
    Good news. Thanks to the generosity of a member I have another D5 that works It is leak testing at the moment, I'd like to get it powered up but I really should go to bed...
    The Cardboard Master
    Crunch with us, the XS WCG team
    Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64

Page 48 of 53 FirstFirst ... 3845464748495051 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •