4x2Gb; 1055t, Crosshair IV Formula - Pushing 4 Dimms + HT Link to the limits :)

[generics_user]

NB Speed was 2800mhz; 8gb Ram @ 1500mhz

Take note of the extremely high Temp (56°C AOD/Coretemp; 66°C according to ROG Connect), same clocks with higher HTT are a no-go as temps rise to 67-68 = instant fail in LinX (turning the radfans down from 1400 to 1200rpm has the same effect; 67-68° = instant fail of LinX)

I have to build a new MB Tray for my G70 to upgrade from the Dual Rad to a Dual+Triple setup to overcome my Temp Limit in Linx stable operation (Cinebench on an Architecture Project for 4-5 hours = no problem @ 4.2ghz / 1600mhz ram); i'll report back once this is done (abut 1-2 weeks)

[Royalk]

Just be fine with this "4,3,2"---4GHz core, 3GHz NB Speed, DDR3-2000 ram speed...
Get this with stock mobo voltage (auto), CPU-NB at 1.35v, VDimm at 1.65v.
I love my ECOs...and well done C4F

[generics_user]

looks gret; can't wait until i get my cooling fixed (although i run 4 Dimms so im ight hit a lower max clockspeed...)

what are your temps when loading it with LinX or Prime?

[Royalk]

looks gret; can't wait until i get my cooling fixed (although i run 4 Dimms so im ight hit a lower max clockspeed...)

what are your temps when loading it with LinX or Prime?

65C Prime95 load with 27C ambient... I'd prefer to disable 2 cores and go up to 4.2GHz for daily use.