GTX 460 aftermarket coolers

[Funky]

@Ket

I have attached bios of Galaxy GTX 460 1GB GC Ed as attachment to this post.
I dont have zotac in the system as of now, will send it to you later.

its not so much the bolt spacing since its the same as a g92gts.a stock 76gt heatsink fits it lol even can put a vf700 on it if it can take it lol
my palit card is shorter and uses a side by side dmi hence double size bracket so the box is in the way,if not i could get even a cheap as1 rev2 to fit it np.an other thing with the shorter non ref pcb is that its core is closer to the bracket then the other cards.
not had a ref. board yet but i think same bolt space?

the ref. boards with over and under connectors will have an easier time to fit coolers that are on the market already.

No, its definitely not same as G92.
AFAIK Palit is using old G92 mounting.
Rest including the reference are using different mounting holes.
They are not in square arrangement but rectangular with diagonal distance of around 80mm.

See, here is the picture of Palit GTX 460 that I found on web.




Now here are few pics of my Galaxy GTX 460. And even reference models have same mounting points to this one.

[Ket]

@Ket

I have attached bios of Galaxy GTX 460 1GB GC Ed as attachment to this post.
I dont have zotac in the system as of now, will send it to you later.

Thanks very much

[cowie]

@Ket

I


No, its definitely not same as G92.
AFAIK Palit is using old G92 mounting.
Rest including the reference are using different mounting holes.
They are not in square arrangement but rectangular with diagonal distance of around 80mm.

Now here are few pics of my Galaxy GTX 460. And even reference models have same mounting points to this one.

ohhhh so the palit are not the same as the others,boy thats stupid.
i get a pny 460 soon so i will post back on what i could get to fit it and really work.

[azureoval]

I have a Palit with the basic aluminum heatsink so I put on a old Zalman vf900 using the outer most holes. The temps were worse than the stock heatsink so I ended up putting the stock HS back on then strapping a 92 mm fan to it leaving the shroud off. It lowered my temps a good 6 degrees C. Not a huge diff. but better.

Josh