Intel 4.5GHz & 5GHz LinX Stable Club

[andressergio]

Congrats guys some awesome runs here that im kinda ashamed of posting mine but well here's some linx with my hypers tights at PL7

4500 Mhz / 1600 6-6-6-18 PL7 2T



Cheers
Sergio

[l0ud_sil3nc3]

Congrats guys some awesome runs here that im kinda ashamed of posting mine but well here's some linx with my hypers tights at PL7

4500 Mhz / 1600 6-6-6-18 PL7 2T



Cheers
Sergio

looks excellent my friend, however you need 15 more passes on top of the 5.

[andressergio]

looks excellent my friend, however you need 15 more passes on top of the 5.

thanks mate yes i know just dont want to punish it much more, it was just a test on this amazing mem

[zalbard]

Alright, I'm back.
The OP is fixed (without errors, I hope!). Thank you for your patience.
Excellent results, everyone. Especially PiLsY - awesome clocks using water cooling!
I'd like to remind you that it's a LinX club (read the rules, please), and you have to list your motherboard. Takes 5 seconds, anyway. Batch listing is not compulsory, but it helps.
Also, thanks to those of you who is trying to format parts of their posts similar to the OP - it makes editing easier.

[OC Nub]

Welcome back zalbard.

Have a screen using 4gb of memory but cannot find it, will put the chip back in next week and try again using 4gb, and try 4600-4700. I dont really like this chip as much as my others, it doesnt scale well after 4500. It is the coolest running chip I have ever had, it refuses to get warm even in LinX.

i5-655k, Gigabyte P55A-UD6, 2x1gb HyperX, Water, W7 64

Edit, this was on the P55a-UD7-now dead, maybe it will do better on the UD6.


Uploaded with ImageShack.us

[OC Nub]

Congrats guys some awesome runs here that im kinda ashamed of posting mine but well here's some linx with my hypers tights at PL7

4500 Mhz / 1600 6-6-6-18 PL7 2T

Cheers
Sergio

Very nice Sergio, I know you love that new kit.

[PiLsY]

Alright, I'm back.
The OP is fixed (without errors, I hope!). Thank you for your patience.
Excellent results, everyone. Especially PiLsY - awesome clocks using water cooling!
I'd like to remind you that it's a LinX club (read the rules, please), and you have to list your motherboard. Takes 5 seconds, anyway. Batch listing is not compulsory, but it helps.
Also, thanks to those of you who is trying to format parts of their posts similar to the OP - it makes editing easier.

Welcome back dude - hope you had a good break .

I can also honestly say thanks to you as well - without this thread theres no way I would've pushed it this far. In terms of what has been achieved by people in here this is the best thread ive seen in years .

[OC Nub]

Damn PiLsY, 3rd spot on water, that is amazing. Awesome run.

[andressergio]

Welcome back zalbard.

Have a screen using 4gb of memory but cannot find it, will put the chip back in next week and try again using 4gb, and try 4600-4700. I dont really like this chip as much as my others, it doesnt scale well after 4500. It is the coolest running chip I have ever had, it refuses to get warm even in LinX.

i5-655k, Gigabyte P55A-UD6, 2x1gb HyperX, Water, W7 64

Edit, this was on the P55a-UD7-now dead, maybe it will do better on the UD6.


Uploaded with ImageShack.us

jeeze Tom 4500 with 1,312

[andressergio]

Very nice Sergio, I know you love that new kit.

thanks mate !

yes hypers are the perfect combo for this P45

[SteveRo]

Good afternoon Mr Zalbard,

Please update my Gulftown entry - I wanted to be the first linx stable 32nm over 5ghz, this is with two stage Cascade cooling.

Same 980x as previous - 3003B287

The lowest evaporator temp was -98, the lowest IHS temp was -57.

I don't think this is the lowest cpuv for this chip @ 5ghz - I did not spend a lot of time adjusting.

I have uncore and memory set very slow.

I have some happy snaps located at - http://www.xtremesystems.org/forums/...d.php?t=255686

Also, I didn't want to put the added stress of HT on the chip though I do think the chip would do 5ghz HT - perhaps even at these same settings.

Anyway - so screen shot -

[JoeChuo]

Hi Guys! May I know how's the ranking is made on the first page.
Glad to join the club!

[OC Nub]

Good afternoon Mr Zalbard,

Please update my Gulftown entry - I wanted to be the first 32nm over 5ghz, this is with two stage Cascade cooling.

Same 980x as previous - 3003B287

The lowest evaporator temp was -98, the lowest IHS temp was -57.

I don't think this is the lowest cpuv for this chip @ 5ghz - I did not spend a lot of time adjusting.

I have uncore and memory set very slow.

I have some happy snaps located at - http://www.xtremesystems.org/forums/...d.php?t=255686

Also, I didn't want to put the added stress of HT on the chip though I do think the chip would do 5ghz HT - perhaps even at these same settings.

Anyway - so screen shot -

Congrats!!!!! Thats pretty awesome, nice work.

[kitfit1]

Well done SteveRo, it was only a matter of time me thinks
Now get it done again with a bit of HT goodness thrown in

[SteveRo]

Well done SteveRo, it was only a matter of time me thinks
Now get it done again with a bit of HT goodness thrown in

Thanks Mr Kit - I'm going to hold off just a bit on linx with HT on. I want to do my try at 40k PC Mark Vantage first - hopefully within the next week.

[kill_a_wat]

Nice SteveRo

And yes when you have a chance give it some nice uncore/mem and HT

[SteveRo]

Nice SteveRo

And yes when you have a chance give it some nice uncore/mem and HT

thanks - still working on my mount!

[sniper_sung]

OK this time it's the E760 without throttling bug. Still with Venomous-X lol

I hope it qualifies this time.

sniper_sung | Core i7 980X [6C 6T] @ 4509.0MHz | 1.388 | EVGA E760 | Air | 3013A524

[LostHawk]

Wow, 92 GFlops at only 4,5GHz. I am impressed here. Nice job.

[PiLsY]

I want one

[SteveRo]

Congrats!!!!! Thats pretty awesome, nice work.

Thanks! I have a better mount now
I scrapped some of the eraiser off the top of the cpu bracket to get a little better contact.
Temps are even lower now - IHS no load is -87/88C

[Olly_K]

OK this time it's the E760 without throttling bug. Still with Venomous-X lol

I hope it qualifies this time.

sniper_sung | Core i7 980X [6C 6T] @ 4509.0MHz | 1.388 | EVGA E760 | Air | 3013A524

Great work, but how are you getting 92GFlops ? I can only get 58 GFlops with my 980x....Uncore is at 3600 and mem at 900....?

EDIT...think I've figured it out now

[xpatar]

980x (6C/12T) @ 4530 MHz - Vcore @ 1.44375v - Gigabyte GA-EX58-UD4P (rev. 1.0), bios version F13 - water - 3003B320

[Dark-Energy]

OK this time it's the E760 without throttling bug. Still with Venomous-X lol

I hope it qualifies this time.

sniper_sung | Core i7 980X [6C 6T] @ 4509.0MHz | 1.388 | EVGA E760 | Air | 3013A524

Temps are a bit scary, 88C? Isn't that a tad too high, even for LinX?

[sniper_sung]

Great work, but how are you getting 92GFlops ? I can only get 58 GFlops with my 980x....Uncore is at 3600 and mem at 900....?

EDIT...think I've figured it out now

From my observations disabling HT on gulftown can increase gflops. I only used stupid loose settings for qpi and mem trying to reduce pressure, cuz you know i don't have a decent cooling solution...

Temps are a bit scary, 88C? Isn't that a tad too high, even for LinX?

Because the OP doesn't accept my previous post I had to torture my 980X again with very poor cooling