AMD "Thuban" Core (Phenom II X6) XS Overclocking Charts

**Zeus** · 05-17-2010, 12:36 PM

Just 40 mins of Prime blend so not considered stable but good enough for me.

Please put under untested.

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: CCBBE CB 1012DPMW
CPU Frequency: 4216 MHz
CPU vCore: 1.47V bios
CPU Multiplier: 20x
CPU Turbo: Disabled
CPU NB Speed: 2949 MHz
HT Ref Speed: 210 MHz
RAM Speed: DDR1685
RAM Timings: 6-6-5-18-1T
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.65V
Motherboard: Asus Crosshair IV Formula - bios 0801
Chipset/Socket: AM3, 890X + SB850
Cooling: Water Heatkiller 3.0
Temps: 16ºC Idle / 35ºC Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable 40 mins Prime blend -- untested
Ambient temp: 22ºC

**richierich** · 05-17-2010, 12:38 PM

nice Zeus

**MrRuckus** · 05-17-2010, 12:46 PM

Originally Posted by Andi64

Thanks Ruckus!

Can you test for 1 hour, please?

Sure, Linpack is running.

**MrRuckus** · 05-17-2010, 02:04 PM

Here ya go Andi64.

**slaveondope** · 05-17-2010, 02:27 PM

Anyone else try IntelBurn Test and get an odd noise!!?!?!?!?

**Particle** · 05-17-2010, 03:01 PM

If you run a stress test and get a noise, it's almost surely power related--chokes or whatnot.

**MrRuckus** · 05-17-2010, 03:31 PM

I guess these pretty little graphs OCCT makes show the usage better.

**Andi64** · 05-17-2010, 03:47 PM

Thanks Ruckus!! I really really appreciate it! It's really nice to see 1Hs+ of Linpack running at 4025Mhz!
I'm waiting for a pair of 1055T, one for me, and one for a friend... we want to hit 4.0Ghz stable.

My build:
Gigabyte GA-890GPA-UD3H
Phenom II X6 1055T with TRUE
GSKill ECO DDR3-1600 7-8-7-24

I'll post some results as soon as we have them. We are in Argentina, so it's going to take some days

**p4spooky** · 05-17-2010, 06:02 PM

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: CCBBE CB 1011APMW
CPU Frequency: 4000 Mhz
CPU vCore: 1.39V Bios (1.41V when loaded Prime95)
CPU Multiplier: 20x
CPU Turbo: Disabled
CPU NB Speed: 2600 MHz
HT Ref Speed: 2200 MHz
RAM Speed: DDR800
RAM Timings: 5-5-5-15-1T
RAM Configuration: 8 GB (4 x 2 GB)
RAM vDIMM: 1.96V
Motherboard: Foxconn A79A-S Bios D28 Beta

Chipset/Socket: AM2+, 790FX + SB750
Cooling: Air - Kingwin XT-1264
Temps: 22ºC Idle / 56ºC Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Stable 8+ hours Prime blend -- Tested
Ambient temp: 24C

Full Load

Idle after Prime Run (notice no downclock of cores unlike Asus M3N-HT Deluxe

)

Idle

**ridney** · 05-17-2010, 06:12 PM

i like the charts particle, it looks more interesting

**Daveburt714** · 05-17-2010, 08:32 PM

Originally Posted by ridney

i like the charts particle, it looks more interesting

I agree ridney!

Particle: You could probably compact it a little more by just showing the model# of the chip (drop the "Phenom II X6" verbage)...
Just a suggestion, since it seems a little redundant based on the thread title.

BTW: Thanks for the kind words concerning my chip, I really haven't had alot of time testing it yet.
For some wierd reason setting HTRef >295 in bios is still giving me fits, even when everything else is lowered to the point where it should be out of the equation...

**nunchucka** · 05-17-2010, 11:15 PM

seems i have found the max for this chip. not a good batch as i need lots of volts to get this thing up there.. my NB is hot on this board, when i get time i will re-seat it...

CPU Model: AMD Phenom II X6 1055T
CPU Stepping: CCBBE CB 1013CPMW
CPU Frequency: 4004 MHz
CPU vCore: 1.58V bios
CPU Multiplier: 14x
CPU Turbo: Disabled
CPU NB Speed: 2002 MHz
HT Ref Speed: 200 MHz
RAM Speed: DDR1524
RAM Timings: 8-8-8-20-2T
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.8V yes the mushkin ram XMP-1600 is 1.8v
Motherboard: Gigabyte GA-890GPA-UD3H - bios F7c
Chipset/Socket: AM3, 890GX + SB850
Cooling: DTek water block
Temps: 24ºC Idle / 48ºC Load
Operating System: WinXP SP3
32/64-Bit: 32
Stable/Suicide/Untested: Stable 5hrs 34 mins Prime blend

**demonkevy666** · 05-18-2010, 07:51 AM

Originally Posted by nunchucka

seems i have found the max for this chip. not a good batch as i need lots of volts to get this thing up there.. my NB is hot on this board, when i get time i will re-seat it...

CPU Model: AMD Phenom II X6 1055T
CPU Stepping: CCBBE CB 1013CPMW
CPU Frequency: 4004 MHz
CPU vCore: 1.58V bios
CPU Multiplier: 14x
CPU Turbo: Disabled
CPU NB Speed: 2002 MHz
HT Ref Speed: 200 MHz
RAM Speed: DDR1524
RAM Timings: 8-8-8-20-2T
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.8V yes the mushkin ram XMP-1600 is 1.8v
Motherboard: Gigabyte GA-890GPA-UD3H - bios F7c
Chipset/Socket: AM3, 890GX + SB850
Cooling: DTek water block
Temps: 24ºC Idle / 48ºC Load
Operating System: WinXP SP3
32/64-Bit: 32
Stable/Suicide/Untested: Stable 5hrs 34 mins Prime blend

nunchucka your coretemp says you running 1.4 volts on the cpu and cpu says 1.58 volts ? bugs everywhere right now :/

**MaxMax77** · 05-18-2010, 07:55 AM

thats not a bug afaik, coretemp just shows the VID (as set in factory from AMD, to reach the default 6x2.8GHz) of the cpu, the 1.58v are the real volts he needed to achieve the 4GHz.

**charged3800z24** · 05-18-2010, 07:59 AM

Originally Posted by demonkevy666

nunchucka your coretemp says you running 1.4 volts on the cpu and cpu says 1.58 volts ? bugs everywhere right now :/

The VID is what core temp reads, CPU-Z reads bios voltage settings, This is what it does on my CorssHair IV as well. Core temp also reads max Turbo addtion regardless of actual voltage setting. It also does this when using Offset for voltage.

**Polizei** · 05-18-2010, 08:01 AM

No, because I just downloaded Core Temp and it shows the same voltage as CPU-Z for me.

**MaxMax77** · 05-18-2010, 08:03 AM

@polizei: than you have not altered the voltage in the bios: is it still on auto?

**slaveondope** · 05-18-2010, 08:31 AM

CPU Model: AMD Phenom II X6 1090T BE
CPU Stepping: CCBBE CB 1011MPMW
CPU Frequency: 4197 MHz
CPU vCore: 1.55 idle 1.62v load
CPU Multiplier: 18x
CPU Turbo: Disabled
CPU NB Speed: 2796 MHz
HT Ref Speed: 233 MHz
RAM Speed: DDR1555
RAM Timings: 7-7-7-19 T1 unganged
RAM Configuration: 4 GB (2 x 2 GB)
RAM vDIMM: 1.55v
Motherboard: DFI LP Jr 790GX M3H5
Chipset/Socket: AM3, 790GX + SB750
Cooling: H50
Temps: 28ºC Idle / 55ºC Load
Operating System: Win7
32/64-Bit: 64
Stable/Suicide/Untested: Untested/Stable [your pick] 35 mins Prime blend and IntelBurn at the same time

**dalearyous** · 05-18-2010, 08:35 AM

ugh,

can't wait to join you guys!

i have 1055t + MSI 890FXA-GD70 + g.skill 4GB (2 x 2GB) DDR3 1600 + corsair H50 in the mail. will be posting with results later in the week.

**LowRun** · 05-18-2010, 08:55 AM

four years wait before your first post

shy much?

**richierich** · 05-18-2010, 08:59 AM

LOL dalearyous. Welcome

**seiferoth10** · 05-18-2010, 09:08 AM

One quick question:

How are people able to change the multiplier for their 1055t? I thought it was supposed to be locked.

Edit: Wow, registered ~7 years ago... first post :P .

**dalearyous** · 05-18-2010, 09:18 AM

yeah i don't remember creating an account, i came to the site, wanted to post and my normal username worked.

**biohead** · 05-18-2010, 09:19 AM

Originally Posted by seiferoth10

One quick question:

How are people able to change the multiplier for their 1055t? I thought it was supposed to be locked.

Edit: Wow, registered ~7 years ago... first post :P .

it is locked. only when you turn on Turbo, it can jump from 14x to 16.5x as far as i know.

**seiferoth10** · 05-18-2010, 09:25 AM

Here's one with a multiplier of 13: http://www.xtremesystems.org/forums/...&postcount=261
And another with 13.5: http://www.xtremesystems.org/forums/...&postcount=247

There's others, but those are what I found in a very quick search.

Thread: AMD "Thuban" Core (Phenom II X6) XS Overclocking Charts

Thread Tools

Search Thread

Rate This Thread

Display

My 1090T

Bookmarks

Bookmarks

Posting Permissions