MMM
Results 1 to 25 of 954

Thread: AMD "Thuban" Core (Phenom II X6) XS Overclocking Charts

Threaded View

  1. #10
    Xtreme Enthusiast
    Join Date
    Jun 2009
    Location
    Singapore
    Posts
    560
    Here's mine, just got my ram from rma so had finally the time to test stability. I had ran Prime95 blend at custom to finish each FFT length test at only one minute and finished all test in just under one hour and still going as I'm writing this.

    Last time i tested prime with my x6 (3 weeks ago) fried my board running at 4.2GHz at 1.575v, i guess i was feeding too much volts trying to find stability on which the problem might have been my ram.

    • CPU Model: AMD Phenom II X6 1055T BE
    • CPU Stepping: CCBBE CB 1011BPMW
    • CPU Frequency: 4050 MHz
    • CPU vCore: 1.44V
    • CPU Multiplier: 13.5x
    • CPU Turbo: 4350 MHz 1.54v
    • CPU NB Speed: 2700 MHz
    • HT Ref Speed: 300 MHz
    • RAM Speed: DDR3-1600
    • RAM Timings: 8-8-8-24-1T
    • RAM Configuration: 4 x 2GB
    • RAM vDIMM: 1.65V
    • Motherboard: MSI 790FX-GD70
    • Chipset/Socket: 790FX + SB750, AM3
    • Cooling: Water (Enzotech Luna Rev.A + TFC Monsta 420/360)
    • Temps: 23C Idle / 40C Load
    • Operating System: Windows 7
    • 32/64-Bit: 64
    • Stable/Suicide/Untested: Stable


    From the screenshot, my idle temps shows 33c but actually it's about 23c as i ran hwmonitor after i ran prime lame excuse

    Last edited by ridney; 05-15-2010 at 05:43 AM.
    Phenom Monsta - Gallery
    AMD Phenom II X6 1055T | MSI 790FX-GD70 | Dominator 1600 C8 8GB | 4770 CF | 2xWD640GB Raid0 | 2xWD1.5TB Raid1 | Corsair HX850 |Lian-Li PC-7FW
    Enzotech Luna Rev.A | 2 x MCW60 | MCP-350 | XSPC Dual DDC Res | TFC Monsta 420/360 Limited Edition


    Canon EOS 7D | EF-S 17-55 F2.8 IS | Nissin Di866 | D-Lite4 | 17" MiniSoft | 53" Midi-Octa | 7" Reflector + 20º Grid | Explorer XT SE | Crumpler 6MDH

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •