Cases with all internal Water Cooling from the Gallery

**ButtSprinkles** · 02-19-2010, 05:52 PM

Originally Posted by fitseries3

my mountainmods ascension crystal ship

http://www.xtremesystems.org/forums/...postcount=1648

Can I ask why you have like 10 deltas and an Rd-30 (is that what it is?) and you only have it on a CPU only loop? Or did you add other stuff later? (And why a Supreme LT, it's heatkiller now man get with the times!

)

**Fitseries3** · 02-19-2010, 05:55 PM

i hate the way the HK3 looks.

im waiting on the evga 270-gt-w555 to go with my xeons, 12gb ram and 4 gtx295s which will all be on water. THEN it will make sense for all that cooling.

**ButtSprinkles** · 02-19-2010, 06:09 PM

Originally Posted by fitseries3

i hate the way the HK3 looks.

im waiting on the evga 270-gt-w555 to go with my xeons, 12gb ram and 4 gtx295s which will all be on water. THEN it will make sense for all that cooling.

Sounds crazy, dude. How long will you be living on tap water and ramen noodles after buying all that stuff?

Post some pics (and some temps) when you're done with that.

**Sadasius** · 02-19-2010, 06:21 PM

Originally Posted by ButtSprinkles

Sounds crazy, dude. How long will you be living on tap water and ramen noodles after buying all that stuff?

I am thinking for a very long time.

**Utnorris** · 02-19-2010, 06:31 PM

Here is my latest. Going to redo the loop though and sleeving, just waiting for some more parts.

**Ketzer7** · 02-20-2010, 05:35 AM

Originally Posted by Utnorris

Here is my latest. Going to redo the loop though and sleeving, just waiting for some more parts.

Do you have fans just pushing on the rad in that pic, or are there also some above the rad so that you have push-pull going?

Thanks

**Nashaz** · 02-23-2010, 11:11 PM

My gaming Rig (Supernova)
Project log link in my sig.

**Nashaz** · 02-23-2010, 11:25 PM

My mini ITX setup.
Specs:
Zotac 630i
E2180 3ghz
2gb ram
500gb Seagate
350w HEC mini ATX psu
Case is a modded Shuttle KPC

Cooling is a modded CM Aquagate loop
80mm Black ice Rad
mcw30
CM Aquagate CPU Block w/integrated Pump
Tygon 7/16 Tubes
MCRes

**JoeBar** · 02-24-2010, 03:44 AM

Superb work Nashaz...!

**MeeksMan13** · 02-24-2010, 09:08 AM

Well here it is:

my smexy Apogee XT

FrozenQ's Inverse T-Virus Res. Pure secks.

Inside with lights on

Inside with lights off

These 2 are really dark, but I love how sleek the tubing looks =)

I really like how the fading is on the reservoir in this picture

2 awesome pictures to finish off this post with

**miptzi** · 03-05-2010, 05:31 PM

gravedigging....

another small-packed water....

**transit921** · 03-06-2010, 12:38 AM

i hate the antec 300, why cant they make it with a side pannel window,and why a bottom mounted psu,makes no sense,and poor cable management

**transit921** · 03-06-2010, 12:46 AM

the haff 932 looks pretty nice/have the option of top mounted or bottom mounted psu/has fan holes for top mounted or bottom mounted rads/has a large amount of 5.25 drive bays /which i like to put hard drives in/can cut out the 3.5 drive bays for more room/the bad thing is only the amd eddition one has a nice window/the regular one has a crappy window

**crazydiamond** · 03-06-2010, 01:14 AM

Originally Posted by transit921

i hate the antec 300, why cant they make it with a side pannel window,and why a bottom mounted psu,makes no sense,and poor cable management

still a lot of work im planning on doing to it but it should be done very soon

**Alexandr0s** · 03-06-2010, 02:30 AM

What's wrong with a bottom mounted PSU? There are a lot of cases who also have bottom mounted PSU's (800d, and lian li has some too).
And with some innovativity, any case can get some degree of cable management.

**malkiewicz** · 03-06-2010, 02:49 AM

Took this before I replaced my 8800's with 5870's

**sterizos** · 03-06-2010, 04:24 AM

Here is mine

**Quad-Damage** · 03-06-2010, 06:44 PM

Originally Posted by laursi

my p182..
V3

V2.X

V1

Can you show me how you v3 power supply is

I might copy some of ur ideas I have the same case.

**vinister** · 03-06-2010, 07:01 PM

here's mine in an NZXT Tempest

2 x triple rads, one in the top, one in the front
3 x VGA FC

http://www.xtremesystems.org/forums/...d.php?t=242253

**Philwong** · 03-06-2010, 07:22 PM

Originally Posted by malkiewicz

Took this before I replaced my 8800's with 5870's

Nice V1K! Can we have more shots of the interior? I can't figure out the placement for the rads. Thanks.

Phil

**malkiewicz** · 03-06-2010, 10:52 PM

Thanks, No rads - 100% TEC w/ Heat Sinks & Fans (All Internal System)...

**laursi** · 03-07-2010, 02:02 AM

Originally Posted by Quad-Damage

Can you show me how you v3 power supply is

I might copy some of ur ideas I have the same case.

Sure.. Made a hole to the back wall that allows the PSU to slid in/out and reinforced it with some flatbar. Not pretty but it works fine.

**Alexandr0s** · 03-07-2010, 02:19 AM

Originally Posted by malkiewicz

Thanks, No rads - 100% TEC w/ Heat Sinks & Fans (All Internal System)...

Sjeesh Malkiewicz, how many CoolIt units have you managed to cram into that poor case?

**Airbrushkid** · 03-07-2010, 02:29 AM

On the all the Silverstone links all I get is this --

Invalid Post specified. If you followed a valid link, please notify the administrator

Why?

**Waterlogged** · 03-07-2010, 03:07 AM

Originally Posted by Airbrushkid

On the all the Silverstone links all I get is this --

Why?

Because somewhere along the way, the forum lost track of a bunch of posts. Some topics, like the Case gallery(just 1 of many), will even post a new page that you can't access because it thinks it has posts it doesn't.

Odds are, the posts are still here somewhere, it's just that the post count that the link refers to is bad and has been shifted.

Thread: Cases with all internal Water Cooling from the Gallery

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions