I'm still at bios F3h and my ram is deliberately set loose (spec is 77720 CR1)
The Vcore jump from 4.53GHz was the notable change, going from < +0.2000DVID to the +0.25000 below.
Quote Originally Posted by nugzo View Post
Code:
Advanced CPU Features:
CPU Clock Ratio ................................ [23 ]
Intel(R) Turbo Boost Tech ...................... [DIS]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[EN]
CPU Enhanced Halt (C1E) ........................ [EN]
C3/C6/C7 State Support ......................... [DIS]
CPU Thermal Monitor ............................ [EN]
CPU EIST Function .............................. [EN]
Virtualization Technology ...................... [IS]
Bi-Directional PROCHOT ......................... [EN]

Uncore & QPI Features:
QPI Link Speed ..............................[7.2/36X]
Uncore Frequency ............................[3200]
Isonchronous Frequency ......................[EN]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [EN]
BCLK Frequency (MHz) ................................[200]
PCI Express Frequency (MHz) ........................ [100]
C.I.A.2........................................... .. [?]

Advanced Clock Control:
CPU Clock Drive ..............................[800]
PCI Express Clock Drive ................... [900]
CPU Clock Skew ............................. [0]
IOH Clock Skew ............................. [0]

Advanced DRAM Features:
Performance Enhance ...................... [STD]
Extreme Memory Profile (X.M.P) ........... [DIS] 
System Memory Multiplier (SPD) ........... [8X]
DRAM Timing Selectable (SPD) ............. [EXPERT]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[8]
tRP ...................................[8]
tRAS ..................................[20]
CR.....................................[2]
B2B.....................................[]


Advanced Voltage Control:
CPU Intel Core i7 950 D0 Stepping
Load Line Calibration ................. [LEVEL 2]
CPU Vcore ..............................[Normal-->1.15000 +0.25000 dvid] 
QPI/VTT Voltage 1.150v .................[AUTO]
CPU PLL 1.800v .........................[AUTO] 
PCIE 1.500v ...........................[Normal]
QPI PLL 1.100v ........................[AUTO]
IOH Core 1.100v .......................[AUTO]
ICH I/O 1.500v ........................[AUTO]
ICH Core 1.1v .........................[AUTO]

DRAM
DRAM Voltage 1.500v .............. [1.660] 
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]