Super Pi 32M Low Clock Challenge

[cheapseats]

11.xx (45nm/i7)


2813.8......cheapseats.........11.58.891....13x217 ....1082mhz.....7-7-6-20....2/10..X58


XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
2 disks / 4 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file)

[cheapseats]

7.xx (45nm/i7)


4348.9......cheapseats..........7.58.859....20x218 ....1087mhz.....7-7-6-20....2/10..X58


XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
2 disks / 4 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file)

[kintaro]

[QUOTE=cheapseats;4241146]wow kintaro your kit is something else

also, it's appreciated that you haven't taken the CPUZ read any lower for your 9.x and 8.x cheers ..
11.x @ 2813.7 and .6 .. CPUZ not low enough on mine, so new tRCD 7 run
only @ 2813.8 and time is 'blocked' by 0.2mhz CPUZ, oh well


this run may make you feel better.
yours Blades are still strong.

[kintaro]

4339.9......kintaro..........07.59.859....19x228.4 ....1142.1mhz.....7-8-7-21....2/10..X58

[cheapseats]

4339.9......kintaro..........07.59.859....19x228.4 ....1142.1mhz.....7-8-7-21....2/10..X58

awesome run

how about 216.5x20 @ CL6 ? possible with subs i think

[cheapseats]

9.xx (45nm/i7)


3411.3......cheapseats..........9.59.969....19x180 ....1077mhz.....7-7-6-20....2/12..X58


XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
2 disks / 4 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file)







10m00.047


10m00.031


10m00.016

[jmax_oc]

7.xx (32nm i5)


5761.2......jmax_oc............6.59.265....24x240 ....960mhz.....6-7-6-18....2/8..P55



I think that I can do sub 7mn 30/40MHz less with better subtimings.

[kintaro]

3411.3......kintaro..........09.59.828....18x189.5 ....1137.1mhz.....7-8-7-21....2/12..X58

[Hyperhorn]

*Updated from #189 to #208*
Unfortunately not included are #192 and #207 due to the lack of CPU-Tweaker. Sorry

Two things I would like to say:
1. Sorry for the delay. Last weeks were pretty busy for me, so I had to set my priorities for RL. Today RL had a time-out.
2. Thank you all for posting such great scores here and pushing each other - that`s the spirit!

[kintaro]

2812.8......kintaro..........11.59.813....15x187.5 ....1125.1mhz.....7-8-7-20....2/12..X58

[kintaro]

3089.1......kintaro..........10.59.672....19x162.6 ....1138.1mhz.....7-8-7-21....2/14..X58

[3oh6]

the ASUS R3E BIOS is coming along nicely and 32M is now at the point that Gulftown can compete with Bloomfield
clock for clock...very very close at least. consider this a sneak peak of what the board is capable of with a Gulftown
in the driver seat. its been a while since i've done any 32M LCC, but for testing BIOS efficiency, this is the best way



i7 980x (3008A006) 24 x 211.2 // Chilly1 SS
ASUS Rampge 3 Extreme (0238) // 3oh6 R3E heatsink combo
Corsair Dominator GTX2 3x2GB
Biostar 8600GTS
Seagate 7200.9 80GB SATA2 (10GB partition for OS / 10GB partition for SPi/page)
Ultra XPro 750W
Win2K3 (custom nLite'nd job)

5069.2......3oh6................6.59.969....24x211 ....1056MHz.....7-7-6-19....2/10..X58

5069.2MHz SPi 32M = 6m 59.969s

[dinos22]

looks good Jody
where were you at with older bios?

[Hondacity]

nice run jody

what is that cpu pot? looks real nice

[kintaro]

Great result with such low uncore

[3oh6]

looks good Jody
where were you at with older bios?

the older BIOS's were about 4-5 seconds back around 5GHz. hopefully there is a little more there
but i think 32M efficiency is pretty much leveled out on this board.

nice run jody

what is that cpu pot? looks real nice

thanks, its a Chilly1 SS phase change, not a pot.

Great result with such low uncore

thanks, the uncore sucks on this chip. absolute max on phase is around 4.3-4.4GHz, but RTL needs
to come way loose for even that much.

i am going to put the GTX2's under cold some time soon and try for 219.5*23. i am thinking that
can get into the 6's as well if RTL can stay tight...maybe even less.

[Bullet92]

3oh6 what do you say on this efficiency? Is there any space to improve (except using 2x2GB kit) ? I have better time for hwbot (click) but can not get sub8 with 1 BCLK lower.


4914.0......Bullet92.............7.59.313....25x19 6 .....983MHz.....8-6-6-18....2/10...P55

[redratamd]

3oh6 what do you say on this efficiency? Is there any space to improve (except using 2x2GB kit) ? I have better time for hwbot (click) but can not get sub8 with 1 BCLK lower.


4914.0......Bullet92.............7.59.313....25x19 6 .....983MHz.....8-6-6-18....2/10...P55

As usual. I love you xD

[George_o/c]

3547.1.......George_o/c..........9.58.813.....17x208.7......1043MHz..... 7-7-6-19....2:10....P55

[Oldscarface]

i am going to put the GTX2's under cold some time soon and try for 219.5*23. i am thinking that
can get into the 6's as well if RTL can stay tight...maybe even less.

Yes, with the GTX2's memory you can get a sub 7 min @ 219,5 x 23
I will post mine score tonight 3oh6

[Oldscarface]

5049.6MHz.......Oldscarface..........6.59.484..... 23x219.5......1097.8MHz..... 7-7-6-20....2:10....X58

This was done with a Single Stage Phase Change.

[sofos1990]

wow mate
What rams did you use ? Vdimm ?

[Bullet92]

GTX2 for sure
Great run Oldscarface

[Oldscarface]

wow mate
What rams did you use ? Vdimm ?

Thanks
Vdimm was about 1,76 volt, air cooled
This memory is mindblowing, corsair has done a hell of a job .

GTX2 for sure
Great run Oldscarface

Thanks Bullet92
When I have some more time, I will continue getting more out of the system.

[youngpro]

6 58.244 @ 5061mhz

Gigabyte X58A-UD9
corsair 2250 @ 1012 7-7-6-20
just a really quick run, havnt touched ram yet, surely another 3-5 seconds available here... gigabyte a contender for 32? most likely..