Elpida Hyper Graveyard

[saaya]

7-7-7-20 1.74v b2b=31


but it was not stable for vantage at tho's speeds had to up it to 8-8-8-20 1.8v it would prolly have gont thru @1.8 7-7-7-20 but never got the chance to test

also whats the best way to get the sinks off? hair dryer?

thats only 1850 tho... but 777? doesnt it go higher with 787?

didnt the previous kits do 2000+ 787 with 1.65v?
and now its 1850 787 with 1.75v? hmmm :/

best way to remove the heatspreaders... yeah hairdryer but you might actually unsolder them if you overdo it... and the only time i tried to take heatpders off a corsair stick the solder balls went pop pop pop and i had the heatspreader with all chips glued to it in my hand... and i barely pulled, i was really shocked lol
so if be careful...

definately TWIST the heatspreader sideways and dont pull it off!

[tripgood]

My 2nd set of corsair dom GT's 3x2 2000 7-8-7 kit just died. I received this kit in June from an rma of my original kit purchased in February. I thought the suspect Elpida chips were identified and removed from the supply chain by that time but I guess not. This was on a Classy 759 @200 bclk and 1.64 vdimm. Rig was used for light gaming and such but NO benching and that is very dissapointing. At least Corsair's rma service is dependable.

[hipro5]

I think that nowadays Corsair GTs will never die....
By mistake on my ASUS Rampage Extreme, I supplied them with 2.53Volts and they still work...... (I had a saved profile in it with the GTRs/GTS modules ) ....

[marmott]

this is a comparison between my old KHX16000DULT1K3/3GX kit I send to ram and the new one I receive : KHX2000C8D3T1K3/3GX


KHX16000DULT1K3/3GX:




KHX2000C8D3T1K3/3GX:



still Elpida Hyper

edit: image size fixed

[subaruwrc]

I think that nowadays Corsair GTs will never die....
By mistake on my ASUS Rampage Extreme, I supplied them with 2.53Volts and they still work...... (I had a saved profile in it with the GTRs/GTS modules ) ....

Jesus Man!
and I tought 2.42v was sick to my OCZ's

[eva2000]

My 2nd set of corsair dom GT's 3x2 2000 7-8-7 kit just died. I received this kit in June from an rma of my original kit purchased in February. I thought the suspect Elpida chips were identified and removed from the supply chain by that time but I guess not. This was on a Classy 759 @200 bclk and 1.64 vdimm. Rig was used for light gaming and such but NO benching and that is very dissapointing. At least Corsair's rma service is dependable.

Old or new product/sku GTs that failed ?

[hiwa]

mm 0916 new hypers
like new 2200 Cl8 i have here, run + 100Hours 1.80/1.60 and still alive

[tripgood]

Old or new product/sku GTs that failed ?

Here is the box sticker info:
TR3X6G2000C7GTF G

Lot 09230316 There is a QC pass stamp dated 2009 6 03

I have no idea if that makes it old or new product.

[proxis]

so, the new hypers are actually MGH-E not MHN-E anymore ?

[Don_Dan]

Here is the box sticker info:
TR3X6G2000C7GTF G

Lot 09230316 There is a QC pass stamp dated 2009 6 03

I have no idea if that makes it old or new product.

That's old stock, because P/N starts with "TR", new stock starts with "CMG".

[eva2000]

Here is the box sticker info:
TR3X6G2000C7GTF G

Lot 09230316 There is a QC pass stamp dated 2009 6 03

I have no idea if that makes it old or new product.

that's old stock 0923 = week 23, 2009 , new stock is with SKU product code of CMG6GX3M3A2000C7 http://i4memory.com/wp/article/731 so be assured this next RMA will have the new stock which is apparently rock solid

I still have old stock which I've had for nearly 7 months http://i4memory.com/f83/6gb-corsair-...-review-18682/ which still is rock solid up to 1.93v vdimm

[tripgood]

Well that's better news! Thanks

[anzial]

well, another one bites the dust. I had these Kingston 2000 since may, I actually ordered 2 sets but the second set kept dying on me and after a few RMAs I just returned it for refund. This one ran fine at 2000 8-8-8-20 for a while but today, after a few weeks of running at stock (1066) started to BSOD on me... And that's after one day of having a fan on top of it (had the fan before but removed it, and put it back on yesterday). Well, either they didn't like running at 1066 or it was just their time.

[Leeghoofd]

Why on earth do you run 2000mhz specced kits at 1066 lol My Blades are on RMA, hoping to get a good long lasting kit...

[anzial]

well, I was upgrading OS/performing WC maintenance so I didn't want to have an overclock as an unknown variable. I was actually about to overclock the system (that's why I attached the ram fan) but the ram failed

Edit: ran memtest stick by stick, 2 still work fine, one doesn't even boot! errors all over the place in 2 or 3-channel mode. Well, I guess I'll run in dual-channel mode for now

Edit2: I think there were signs before, when I was having random BSODs although overall my overclock was stable but BSODs were still happening. With these Elpidas, you never know - is the oc unstable or just ram bad (well not until it dies lol)

[TheKarmakazi]

Iposted a while ago, that my first kit of 2000c8 kingstons died after some moderate benching (up to 1.8v). Well the kit I recieved in RMA died after just a few 32M runs at 1.7v 910mhz 7-7-6-18. Waiting on my new kit hopefully with the non explosive hypers

[anzial]

I actually never pushed my Kingstons, 1.67v and 2000mhz 8-8-8-20 was the max I applied.

[EvoCarlos]

i manged to bench pcm05 at these setting with 1.9v on the newer hypers

[tripgood]

that's old stock 0923 = week 23, 2009 , new stock is with SKU product code of CMG6GX3M3A2000C7 http://i4memory.com/wp/article/731 so be assured this next RMA will have the new stock which is apparently rock solid

I still have old stock which I've had for nearly 7 months http://i4memory.com/f83/6gb-corsair-...-review-18682/ which still is rock solid up to 1.93v vdimm

Confirmed I received CMG6GX3M3A2000C7 lot no. 09360855 and so far so good. Running stock 7-8-7 2000 1.64vdimm. Using in a gaming rig now so I hope they last.

[Lu(ky]

Yeah my first 2 x set of Kingston HypersX 2000 6GB CL(8) I had to RMA. It nice living only 15 miles away from Kingston Tech and I receive my new set the next day. Planning on testing them tonight.. My first set worked tell 1 of the sticks went bad, then I threw in my second old set unopened and 2 sticks were dead. Does anyone know what they been passing out on the 6GB CL(8) recently?

[saaya]

1800 c6 o.o
nice!

then again... good micron d9 did 1800+ 655... and that was in 2007

[TheKarmakazi]

1800 c6 o.o
nice!

then again... good micron d9 did 1800+ 655... and that was in 2007

I still have an awesome set of GTR diablos... 1020 7-6-6-18 (on 5:8 not bugged divider) and 950 6-5-5-15 @2.15

[EvoCarlos]

1800 c6 o.o
nice!

then again... good micron d9 did 1800+ 655... and that was in 2007

i know its funny how kingston brand these as 2000 mhz but they wont do it
not even at the timmings set in the spd

i might just put my d9's in for a laff

[Kensek]

i know its funny how kingston brand these as 2000 mhz but they wont do it
not even at the timmings set in the spd

i might just put my d9's in for a laff

My replaced Kingston's could do DDR3-2165 with 8-8-8-24-1N Timings.

[[XC] Oj101]

Anyone tried this on Elpida RAM?