Whats highest safe temp when running 95prime cpu test (top one) ??
Whats highest safe temp when running 95prime cpu test (top one) ??
Something like this?
Bobbylite is right. Keep distance to TJMax >20 and enjoy your CPU.
If it ain't broke... fix it until it is.
Was thinking the heat would impare your stability before it damages the processor but obviously that is not the case LOL!
Hehe no, I had a bad waterblock mount due to a design overlook in the mounting kit for 1336 and the fuzion v1...I primed for 5 hours before realizing the cpu was at 105c...
No errors though :P
EVGA z68 FTW
i7 2600k @ 4.8
8gb DDR3 1600
3x GTX 580 3gb HydroCopper2
Silverstone Strider 1500W
Areca 1880i w/ 6x intel x25m
On water
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
I bet you could fry a couple 16oz steaks on that thing....nice, free heater for the winter too.![]()
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
I wouldŽnt exceed 75°C for 24/7 use under water.
Last edited by Paxi; 04-25-2009 at 02:25 PM.
System #1:
i7 975 for bench, W3540 @ 4,4 Ghz HT On, Asus P6X58 Premium, 3x2048 Corsair Dominator 2000CL7, Sapphire 5970 @ stock, Corsair HX1000, 1xOCZ Vertex2 120GB, 3x1TB WD Green
Cooled by:
Loop 1: Watercool HK rev 3.0, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 2: EK 5970 Nickle, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 3: EK Asus NB/SB, Mips Asus Mosfet 1 + 2, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.2 /w Phobya Fans @ 5V Pull
4,6Ghz (21x220) 1,42Vcore with Single Stage (HT enabled)
http://img402.imageshack.us/img402/1251/83962063.jpg
AMD @ testing
X4 955, Asus Crosshair III, same Rams as on Intel Setup, Sapphire 4870X2 @ Stock, PC Power&Cooling 910W
Dam that temp is crazyWell I was priming on my current rig and it got to 76C under load....guess thats safe but not gonna push any more till get the cpu on 120.3
110C on hot summer days on Linkpack...
I'm not sure what the consensus on safe in terms of physically not damaging the chip, but paranoia starts to kick in for me at 70C.
1.7%
Yeap 70C is when i start to worry...
65C is the max I'd run an i7 at..
Nothing to back that up except common sense.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Silverstone TJ07
i7 920
EVGA X58
Corsair Dominator 6gb 1600GT 2000MHz 8-8-8-20
Thermochill PA120.3
Big NG fan controller
Heat Killer v3 CPU Acetal
EK Full block GPU
ATI 5870
Corsair HX850
1X 1TB Samsung
1X 500GB Seagate
1X Crucial SSD 64GB OS
Relevance is simple. Same TJMax and same paranoid peoples about CPU temps.
It was a sort of joke (smilie at the end) and after that screenshot I said what I consider safe 24/7.
If it ain't broke... fix it until it is.
Bookmarks