The Phenom II List of Overclocks

**u22** · 02-25-2009, 10:20 AM

Suicide:

u22 / 940BE 0850DPBW / 4216MHz / 1,728V / 2976MHz / 2x1GB 496MHz / Asus M3A79-T Deluxe / Water / XP32

2h prime

u22 / 940BE 0850DPBW / 3696MHz / 1,520V / 2079MHz / 2x2GB 462MHz / Asus M3A79-T Deluxe / Air (Scythe Mugen 2) / Vista 64bit

**Stuen4y** · 02-25-2009, 10:53 AM

I'm just starting to play with it and 4427.34MHz are my new pb.

http://valid.canardpc.com/show_oc.php?id=515797

Update: 4446.1Mhz
http://valid.canardpc.com/show_oc.php?id=515817

**Zeus** · 02-25-2009, 11:52 AM

Awesome cpu Stuen4y!

**Lastviking** · 02-25-2009, 11:55 AM

Originally Posted by Zeus

Awesome cpu Stuen4y!

+1 on that....looks like a golden one of 0850

**Lightman** · 02-25-2009, 12:37 PM

Originally Posted by Lastviking

+1 on that....looks like a golden one of 0850

+2 on that! Amazing piece of silicon you have Stuen4y!

Is this finally one core clocking or still all 4 cores?
My weakest core is ~150MHz weaker than best.

**Stuen4y** · 02-25-2009, 12:47 PM

Thanks boys, I appreciate your confession.

That's one core, only Core#0. The other cores are not accessible with CPU-Z, so I can't really find out which is my best core, I'm blocked to Core#0.

SPi 1M CPU@4256MHz, RAM@1194 5-5-5-18 - 16.318s

**-Radiant-** · 02-25-2009, 01:29 PM

so... my girlfriend almost killed me for dismantling the HTPC

min. Vcore i can take a screenshot @win

4.3GHZ @1.45V
http://img410.imageshack.us/img410/8361/capture006.jpg

min V i can run Wprime "small" 4.1@1.45
http://img156.imageshack.us/img156/7782/sdasdsfdsf.jpg

Wprime 1024 start@4.1@1.53
http://img410.imageshack.us/img410/5954/sadas.jpg

wprime 1024 End (result)
http://img410.imageshack.us/img410/812/sdas.jpg

setup

http://img207.imageshack.us/my.php?image=cimg2563.jpg

But why so much distrust (i hope this is the correct word

my english is not the best

) It's no secret everything above ~4.2 is not stable

chew* · 02-25-2009, 01:39 PM

Both really strong chips

**the pharaoh** · 02-25-2009, 01:50 PM

Here is an interesting thing I learned last night:

I have two OCs on my P2 that I have done roughly 3-hour prime sessions on: 3.6GHz 1.36v and 3.7GHz 1.39v. Both of these passed the prime with no issues whatsoever.

However, neither of those OCs could play FEAR2 multiplayer for more than an hour. Had to add more volts.

It's interesting that my chip will prime well at lower volts than it's actually "stable". Anyone else have similar results?

**cdawall** · 02-25-2009, 02:03 PM

Originally Posted by Stuen4y

Thanks boys, I appreciate your confession.

That's one core, only Core#0. The other cores are not accessible with CPU-Z, so I can't really find out which is my best core, I'm blocked to Core#0.

SPi 1M CPU@4256MHz, RAM@1194 5-5-5-18 - 16.318s

right click on the word core and select which core you want

there is core2 on mine. going to try and beat your score its now my goal :p with .2sec running slower all around

**Stuen4y** · 02-25-2009, 11:52 PM

Originally Posted by cdawall

right click on the word core and select which core you want

I should have known this yesterday.

Thanks, I'll try the other cores tonight.

**Stuen4y** · 02-26-2009, 02:31 AM

Core #3(actually the fourth core) is the best one, but the temps are not low enough for a validation run. I'll try it tonight.

Some updates.

chew* · 02-26-2009, 11:10 AM

Originally Posted by Stuen4y

Core #3(actually the fourth core) is the best one, but the temps are not low enough for a validation run. I'll try it tonight.

Some updates.

Are you trying to validate 1 core or all 4?

**Stuen4y** · 02-26-2009, 12:53 PM

Originally Posted by chew*

Are you trying to validate 1 core or all 4?

I'm validating and benching on SPi with only one core now, but yesterday I was validating only with Core #0. Tonight I'll try with #3 and will do some SPi benches on the cold.

chew* · 02-26-2009, 01:04 PM

Ahh so your 4.4 wasn't all 4 cores then? Thats preety much what I was asking radiant as well.......although 1 core validations are sweet they are somewhat frowned upon..unless specified that they are 1 core as they can botch the database up preety bad, thx for letting us know.

Highest 4 core air validation to date.......4444, having an issue with new cpu-z and k10 stat, haven't figured it out yet...etc the big red X

http://valid.canardpc.com:80/show_oc.php?id=515512

**Stuen4y** · 02-26-2009, 01:13 PM

4408MHz was with all 4 cores. All the other results are with only 1 core. Are these results not real or?

chew* · 02-26-2009, 01:16 PM

Originally Posted by Stuen4y

4408MHz was with all 4 cores. All the other results are with only 1 core.

ahh ok

**cdawall** · 02-26-2009, 01:29 PM

mine are all on 4 cores just putting it out there and considering i couldnt get any higher on any single core

chew* · 02-26-2009, 09:01 PM

3200+NB on air anyone

**cdawall** · 02-26-2009, 09:22 PM

i should be getting a good phase change soon

**Stage1Ocer** · 03-02-2009, 02:11 AM

Ran OCCT for 24 hours one day only and it worked on the 790GP-DS4H pretty well. Mind you, the nb and the vrm runs pretty hot. If it fails its a good thing it fails on you runnin' prime because what if it fails on you on a time when you need it the most...if its meant to fail it will.

Originally Posted by Titan7171

no prime for me, theres no way I would ever need my rig to run 100% for hours at a time. I overclock for fun, benching and for my games and thats it. Im not going to torture for no reason. highest oc and settings and 24/7 oc and settings ahould be sufficient. An easier test should be maybe 3dm06/ vantage or something for proof the system runs on a decent load?

**FlanK3r** · 03-02-2009, 09:33 AM

whau, nice scores superpi and OC up 4000Mhz :-)

**Steevo** · 03-02-2009, 08:45 PM

Using AOD i was able to run 4.1Ghz, if you don't touch the vcore it won't change it. I am running it on windows 7 out of the Vista partition, after I registered the .dll files. With increased voltage to the CPU HT (from1.199 to 1.275 and NB core to 1.45) both settings directly unadjustable from the BIOS I was able to drop the FSB and push the multi up, then the FSB up a bit more. All on 1.55vcore. It made it past 10 minutes of OCCT and bumped it up again but it failed at 4.2Ghz at that vcore after a few seconds of OCCT.

**charged3800z24** · 03-04-2009, 08:55 AM

Originally Posted by the pharaoh

Here is an interesting thing I learned last night:

I have two OCs on my P2 that I have done roughly 3-hour prime sessions on: 3.6GHz 1.36v and 3.7GHz 1.39v. Both of these passed the prime with no issues whatsoever.

However, neither of those OCs could play FEAR2 multiplayer for more than an hour. Had to add more volts.

It's interesting that my chip will prime well at lower volts than it's actually "stable". Anyone else have similar results?

Mine is quite the opposite. I can't prime on any setting, but memtest OCCT etc pass fine, plus I can game on all night at my OCCT stable OC.

**demonkevy666** · 03-05-2009, 01:20 PM

highest Nb on air is 2.7ghz I've gotten up to 3.0ghz but I need cpu nb volts up to 1.6 then the cpu idles at 40C. cpu core volts still at 1.35 volts core and Nb 1:1 load only got up two degrees >_> 42C lol, I had to boost all voltages for HT Sb and Nbcore to max for it to boot past 2.8ghz.
this Nb speed seem to make a lot of heat.

Thread: The Phenom II List of Overclocks

Thread Tools

Search Thread

Rate This Thread

Display

Prime and OCCT

Bookmarks

Bookmarks

Posting Permissions