program, utility- K10stat

**FlanK3r** · 01-16-2009, 05:56 AM

Hi all, who help me with this program? I downloaded it yeasterday, but i dont know, how use it and where this folder copy?readme is in japanese

.
Worked it only on AMD chipsets or too on Nvidia chipset?Thanks all

**Oese** · 01-16-2009, 10:16 AM

Its simple: unpack into any folder anywhere.

start the program, use the second tab (p-states) to adjust voltages and clocks

hit accept, then ok.

start cpu-z and look whether it works. if it doesnt, check if energysaving-settings in windows are right for cnq...

if everything is ok, make a shortcut.

edit the shortcut to start the program with the switches "-loadpstate -nowindow"

put the shortcut into autostart

voila there you go

i waited LONG for such a program for K10. I could have used my 9750 with a higher overclock.. but whatever, better late then never.

whether it works on nV chipset: dunno.. try it out

**roofsniper** · 01-16-2009, 01:51 PM

wow thats a really nice program. so it has the effects of cool and quiet without even turning cool and quiet on? also i see for phenom I it only allows for 2 different power states. i know phenom I only has 2 power states but can you add more?

**Oese** · 01-16-2009, 02:40 PM

no cnq must be on.. but you can alter the p-states and even nb-multi/volts in windows and load them on bootup.

now i can undervolt/oc WITH CNQ ON!! like in those good old crystalcpuid days... AND BRING IDLE POWER DOWN! Only 142w left for my machine

and its even better then crystalcpuid/rmclock, because it just alters the p-states entrys in the msr and then quits. no additional running prog in the background...

but i think you cannot add additional p-states...

**roofsniper** · 01-16-2009, 03:07 PM

i have cool and quiet off but i can still set power states and use them.

**Oese** · 01-16-2009, 03:22 PM

oh even better

**roofsniper** · 01-16-2009, 03:41 PM

Originally Posted by Oese

oh even better

they most likely won't change themselves on their own but with a click of a button i can change all of the clocks and voltage. i also see that it reads off my nb temps which i have not been able to see with any of my other programs.

**FlanK3r** · 01-19-2009, 01:49 AM

Thanks, today il try it

**BertM** · 01-19-2009, 02:58 AM

great find!! but not much info available on this program.
i saw in google that this is possible also:

K10STAT.exe -loadprofile:1 -nowindow

and these commands can be used:
-enabletlbcache
-disabletlbcache

not sure about these i saw:
-unlimit
-enable309
-disable309
dont know if 309 belongs to the command.

**Oese** · 01-19-2009, 11:21 AM

interesting...

**Hazzan** · 01-19-2009, 11:36 PM

HERE !!

**BertM** · 01-20-2009, 02:31 AM

or here http://www.geocities.com/k10stat/

running my phenom now 400mhz idle.
but some documentation would be greatly appriciated because yesterday suddenly i was running 162mhz fsb. and i dont know how i did it.

edit: its everest giving wrong values when using k10stat.
and downclocking doesnt give much extra savings, perhaps imc or cache is still taking alot of power.
the 5000be took waaay less at 1.1ghz then the 940 at 4x100mhz.

**FlanK3r** · 01-20-2009, 12:27 PM

Hm its ok, but OC up is only with open CPU multiplier

...
x3 8650 next OC up is unreal on this board

**ryboto** · 01-21-2009, 06:25 AM

Originally Posted by BertM

or here http://www.geocities.com/k10stat/

running my phenom now 400mhz idle.
but some documentation would be greatly appriciated because yesterday suddenly i was running 162mhz fsb. and i dont know how i did it.

edit: its everest giving wrong values when using k10stat.
and downclocking doesnt give much extra savings, perhaps imc or cache is still taking alot of power.
the 5000be took waaay less at 1.1ghz then the 940 at 4x100mhz.

Are you also adjusting the vcore? I always undervolt at any setting to check for the lowest possible vcore. It will improve power consumption more than underclocking alone.

**BertM** · 01-21-2009, 06:34 AM

yes i did. below 0.75 volt it just crashes. my amd 5000 was at 0.8.
i have seen screens where they set 0.65 for phenoms with k10stat, so probably my board doesnt allow it or crashes at this setting.

**Meizuman** · 01-28-2009, 04:30 PM

Originally Posted by roofsniper

they most likely won't change themselves on their own but with a click of a button i can change all of the clocks and voltage. i also see that it reads off my nb temps which i have not been able to see with any of my other programs.

I checked that NB temp. At least on my board (MA790GP-DS4H) the "NB" value is exactly the same as core temp. The Temp2 (in case of Temp0 / 1 / 2) or Temp3 (in case of Temp1 / 2 /3) is the NB temperature.

**roofsniper** · 01-28-2009, 04:34 PM

Originally Posted by Meizuman

I checked that NB temp. At least on my board (MA790GP-DS4H) the "NB" value is exactly the same as core temp. The Temp2 (in case of Temp0 / 1 / 2) or Temp3 (in case of Temp1 / 2 /3) is the NB temperature.

hmmmm i just checked that now yea its the same. well that sucks i wish i could know my nb temp. also wish i could know the temps of my pwms but thats a stretch.

**BertM** · 02-26-2009, 10:22 AM

http://www.geocities.com/k10stat/

new version of k10stat is out.
seems to have more functions towards cnq or has its own clock control.

**roofsniper** · 02-26-2009, 03:57 PM

lots of changes but i can't get their own cnq thing to work. when my cpu is at 0% usage it doesn't change and it doesn't go up on load. i have had it randomly switch itself around a few times tho. would i need to have cnq on for this to work properly?

**G0ldBr1ck** · 02-26-2009, 04:21 PM

Originally Posted by roofsniper

lots of changes but i can't get their own cnq thing to work. when my cpu is at 0% usage it doesn't change and it doesn't go up on load. i have had it randomly switch itself around a few times tho. would i need to have cnq on for this to work properly?

must have C&Q enabled in Bios and in OS power settings

**BertM** · 02-26-2009, 04:22 PM

yes i just got it to work.
you must turn of cnq in windows. with powerprofile is enough.
create a shortcut to k10stat with this in the commandline -clkctrl:1
now its on

but k10stat must remain running to make use of its autoclocking.

**Lostfaith** · 03-08-2009, 10:28 AM

hmmm trying to load the second profile from K10stat I renamed "ocslight" on startup.

however I cannot get the switches to work..
I tried variations like:
-loadprofile:2 -nowindow
-loadprofile:ocslight -nowindow
-loadpstate -nowindow
-loadpstate:2 -nowindow
-loadpstate:ocslight -nowindow

checking in CPU-z but no result..

powersetings in vista as balanced... anyone any idea to get it to load a specific profile?

940BE - GB MA790GP-DS4H - 4x1gb OCZSR1066gk's

**BertM** · 03-08-2009, 12:35 PM

did you enter it like on the picture and if you start the k10stat.exe, does it show all the profiles you applied?

i just tried with k10stat91 and renaming and starting a profile doesnt work.
i renamed profile 2 to test and -loadprofile:2 -nowindow did seem to start profile 2.

**Lostfaith** · 03-08-2009, 10:21 PM

tnx, I took the easy way out and swapped the profile I wanted to 1. then it did load.

hopefully the creator of k10stat wll provide more documentation and versions

**Sintel** · 03-25-2009, 04:49 PM

Anyone else having problems with k10stat not applying at boot? Tried it via a shortcut and via the registry, but the altered p-states do not get applied. When running the exact same shorcut/cmdline after boot, the p-states do register.. This is on WinXP SP3 btw. Does the amd driver need to be initialised or something?

Thread: program, utility- K10stat

Thread Tools

Search Thread

Rate This Thread

Display

program, utility- K10stat

Bookmarks

Bookmarks

Posting Permissions