Modded ASUS P5Q/Pro/Deluxe/Premium BIOS

[Lil'ManComputer]

The danger involved with using a mBIOS is exactly the same as using a vanilla BIOS, ie; the risk the flash process might go wrong. The chances of this are very small however and recovery is quick and painless. In the worst case scenario simply put a known "good" BIOS for your board on a floppy disk (doesnt even have to be bootable) and name the BIOS AMIBIOS. (or was it AMIBOOT? its one of those anyway ) after a few minutes and a coupe restarts you'll be looking at the POST screen.

Ok this is about if the flashing procedure fails, but what about me? In my case the flashing was successful, but I cant flash any other BIOS-es no more, cause something is not correct with the BIOS checksum, or some ID ot whatever, so the Update tool cannot identify the rom files correctly, or I dunno..but I get warned with any other BIOS-es, that the rom is not compatible, except the 1611 and the 1611m. I wonder if there will be a new release for P5Q, could I flash it or not?

[Ket]

We already told you your options, one of them will work, its up to you to choose which method is going to cause you the least inconvenience.

[Lil'ManComputer]

We already told you your options, one of them will work, its up to you to choose which method is going to cause you the least inconvenience.

From what you told its only one I didnt tried, to flash with that earlier( 6xxxx or something like that ) version of asus update "fool", but to do that, I need to install an Xp, which I cannot, cause I dont have any free drive to do that. The other methods you have suggested didnt seem to work.

[jo7878]

i have xp . n i can't flash back older bios.so no need to try that.

[Lil'ManComputer]

i have xp . n i can't flash back older bios.so no need to try that.

Biтching twitching. Then what to try?

[Ket]

i have xp . n i can't flash back older bios.so no need to try that.

You haven't tried the older version of asus update which has been linked to in various peoples posts, also doesn't seem like you actually read anything apart from the last 3 posts at most Stop expecting me to solve every problem asus create, I have provided solutions (as have others), that is enough.

[jo7878]

[QUOTE=DuncanOc;3546085]download the AsusUpdt61002.zip from here and tick "bios downgradable" in options

try AsusUpdt61002 , it work.back to 1306. thank.

[Vazovskiiii]

You haven't tried the older version of asus update which has been linked to in various peoples posts, also doesn't seem like you actually read anything apart from the last 3 posts at most Stop expecting me to solve every problem asus create, I have provided solutions (as have others), that is enough.

hallo ket
i have question what's the difference between p5q-e 1406m.rom and p5q-e 1406m v1.rom?

[DuncanOc]

hallo ket
i have question what's the difference between p5q-e 1406m.rom and p5q-e 1406m v1.rom?

Damn,your answer is 2-3 pages back.

READ the previous posts-pages people,before asking

[truehighroller]

You haven't tried the older version of asus update which has been linked to in various peoples posts, also doesn't seem like you actually read anything apart from the last 3 posts at most Stop expecting me to solve every problem asus create, I have provided solutions (as have others), that is enough.

Hey Ket I have been having relationship issues and I feel you are to blame because of your modded BIOS because, I have been spending all my time on seeing which one is best for me. I will be sending you my counseling fees because of this and expect you to resolve all my other issues in life as well. Thanks

[lauri_lr]

I'm using P5Q Deluxe. I was thinking that maybe I could give a shot for modded bios and try one, but is it ok to update bios with Asus Update?

[Vazovskiiii]

Damn,your answer is 2-3 pages back.

READ the previous posts-pages people,before asking

now i have 1703 bios on my p5q-e so i need to know why ez flasha tell's to me that bios is older ? i know that 1406 older and my is newer but how i can downgrade on 1406?

[DuncanOc]

now i have 1703 bios on my p5q-e so i need to know why ez flasha tell's to me that bios is older ? i know that 1406 older and my is newer but how i can downgrade on 1406?

use this way to flash that bastard:

http://www.xtremesystems.org/forums/...postcount=1460

it works only on xp

[Vazovskiiii]

use this way to flash that bastard:

http://www.xtremesystems.org/forums/...postcount=1460

it works only on xp

ok thank's i'll try do my best

[Vazovskiiii]

what should i do now?

[DuncanOc]

what should i do now?

weird...

Have you downloaded the 61002 version?have you uninstalled first the previous version of asusUpdate and ran CCleaner?have you loaded bios defaults?have you ticked the ''bios downgrade'' on options?

Try this,or this

[Vazovskiiii]

weird...

Have you downloaded the 61002 version?have you uninstalled first the previous version of asusUpdate and ran CCleaner?have you loaded bios defaults?have you ticked the ''bios downgrade'' on options?

Try this,or this

yes i did everything but my english is not so perfect so i don't know what is "ticked" ?

[DuncanOc]

yes i did everything but my english is not so perfect so i don't know what is "ticked" ?

On 61002 version of ASUSupdate click ''options'' and tick-select ''bios downgradable''

[Ket]

Nice pictures (couldnt think of anything else, but some recognition had to be made on you fielding the mass of the same questions that keep being asked past 2-3 pages )

[cachirro]

First, i want to thank KET for your awesome work.

my main reason to try your bios, is to avoid the damn wrong temps the official bios reports.

i have OCZ reaper ddr2-800 ram, but when i installed your bios, the MB recognizes the ram as ddr2-1066, and i have everything in auto.

My questions are:
- should i leave it like this? or must i force it to 800?
- will the kit support this "OC" from 800 to 1066 without problems?

i'm not OC fanatic, so i want stability and durability if this thing will become a bad thing in the future.

[DuncanOc]

First, i want to thank KET for your awesome work.

my main reason to try your bios, is to avoid the damn wrong temps the official bios reports.

i have OCZ reaper ddr2-800 ram, but when i installed your bios, the MB recognizes the ram as ddr2-1066, and i have everything in auto.

My questions are:
- should i leave it like this? or must i force it to 800?
- will the kit support this "OC" from 800 to 1066 without problems?

i'm not OC fanatic, so i want stability and durability if this thing will become a bad thing in the future.

Im having the same prob with you,even with the modded bios.The cpu temps are damn wrong(102C at 1.26v)

If the ram runs at 1066 stable and with no errors,than live her at 1066

[cachirro]

that's sad news, i thought that with this bios, the stupid 100+º error would disappear.

how do i know if they are stable at 1066?

[Bergerr]

that's sad news, i thought that with this bios, the stupid 100+º error would disappear.

how do i know if they are stable at 1066?

rofl...these are the type of posts that make me go to overclock.net and never come back for days on end......


ok so since I have no floppy....Not hooked up for better air flow.....and if it goes wrong I wont be able to use the memory stick option.....So I guess I will have to temp use a floppy drive :/

I've only flashed my bios once and it was using the memory stick option......If it doesn't correctly flash over, Ill just be screwed with a nonworking pc until I flash it back? Because some people are posting that once they switched, they couldn't get it to flash to any other normal bios

[Ket]

First, i want to thank KET for your awesome work.

my main reason to try your bios, is to avoid the damn wrong temps the official bios reports.

i have OCZ reaper ddr2-800 ram, but when i installed your bios, the MB recognizes the ram as ddr2-1066, and i have everything in auto.

My questions are:
- should i leave it like this? or must i force it to 800?
- will the kit support this "OC" from 800 to 1066 without problems?

i'm not OC fanatic, so i want stability and durability if this thing will become a bad thing in the future.

Its nothing to worry about. Without specific details I can't say anymore than that. Once again it all boils down to each system behaves differently.

rofl...these are the type of posts that make me go to overclock.net and never come back for days on end......


ok so since I have no floppy....Not hooked up for better air flow.....and if it goes wrong I wont be able to use the memory stick option.....So I guess I will have to temp use a floppy drive :/

I've only flashed my bios once and it was using the memory stick option......If it doesn't correctly flash over, Ill just be screwed with a nonworking pc until I flash it back? Because some people are posting that once they switched, they couldn't get it to flash to any other normal bios

Thats an Asus problem. scroll up a bit and you will see how to get around it with DuncanOCs lil pictorial guide.

[radaja]

ket,whats wrong with my computer?