Trouble updating BloodRage bios to G13

[BenchZowner]

Hey mate.
Here's how I flashed my board using my USB Flash Disk Drive:

1) Download the SFX Installer containing a Windows 98SE Boot Disk Image & the HP USB Storage Format Tool from here ( Click me! )

2) Run the HPtoolWIN98image.exe and press the Install button.

3) After the extraction process the SFX Installer will automatically launch the setup program for the HP USB Storage Format tool.
Continue the installation via the setup wizard as usual.

4) Plug in your USB Flash Disk Drive, and open up HP's USB Storage Format tool.
Select your USB Drive at the "Device" drop-down menu.
Set the File System to FAT32.
Give your volume a label ( e.g. FLASH )
In the format options field:
tick the "Quick Format" option
tick the Create a DOS startup disk and select the "using DOS system files located at" option and press the "..." button ( Browse ) and set it ( select ) to point at C:\Temp\Windows 98SE Boot Disk directory

Finally press the "Start" button and wait for the format process to finish.
When done, close the HP USB Storage Format tool by pressing the... close button

5) Now open the flash drive @ My Computer and copy and paste the BIOS File ( 8A1F1G13 ) and the awdflash.exe file that I'm going to link as well.

download awdflash.exe ( click me! )

6) Now restart the PC and boot from your USB Drive.

At the command prompt type the following command:

awdflash 8A1F1G13.BIN /py /sn /Wb /cd /cc /cp /ch /H2

and press enter.
Give it some time, it will load the AWDflash utility, and automatically input the commands.

Let me know how it went

Edit: Updated the AWDflash version to 8.92, please re-download awdflash.exe