Cpu-z 1.48

[stasio]

Released 15. October 2008

HERE

* Improved support for Intel Core i7 (Bloomfield & Gainestown).
* Intel Atom dual-core version support.
* AMD Athlon "Kuma" processor support.
* Alternate clock computation method based on "duty cycles" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini)

[Monkeywoman]

nice, but i think i found a bug. under Windows Version it says Direct X10.0. i have Vista sp1 installed; should be 10.1 riight?

[Infa]

no dont think so.

[Leeghoofd]

Thx for this new version lads

[stasio]

CPU-Z 1.48.1

HERE

[stasio]

CPU-Z 1.48.2

HERE

[webwilli]

thanks stasio

[hecktic]

needs more work still with Dell XPS M1530 notebooks.... cpu readings are way off

[stasio]

CPU-Z 1.48.4

HERE

[xsbb]

Thanks for the update stasio!

[Marco André]

Thanks for the update stasio!

+1

[G.Foyle]

1.48.4 won't read my SPD correctly. Shows only memory size, nothing else. 1.48 was OK.

[Eastcoasthandle]

So you can stick to what you have if you don't have one of the newer CPUs then.

[stasio]

1.48.4 won't read my SPD correctly. Shows only memory size, nothing else. 1.48 was OK.

As 1.48.4 came without configuration file,must copy and paste from 1.48.

[zanzabar]

nice, but i think i found a bug. under Windows Version it says Direct X10.0. i have Vista sp1 installed; should be 10.1 riight?

nope, 10.0 still, the 10.1 video is already in dx10.0 but the audio isnt out yet so its still dx10.0

[hecktic]

on the new version now my core2duo T9300 is identified correctly however the core speed is read with a flux of 1197 +/-0.5 ~ 2499.7 +/-0.5 and it is never steady....
same with the FSB although its more accurate to 800mhz with ignorable flux of 796 ~ 799 which is OKAY and the bus speed is a constant 199.5

and while this is all happening the core VID is simply jumping up and down... and never steady at all

maybe i just have a bad cpu ?

[largon]

What's with the fact that when "ShowDutyCycles=1" CPU multiplier is grayed out (atleast on Q6600 EIST enabled)?

[stasio]

CPU-Z 1.48.5

HERE

Now with configuration file

[roofsniper]

whats different with the new version? 1.48.5?

[stasio]

whats different with the new version? 1.48.5?

No changelog until ver.1.49.

[X.T.R.E.M.E_ICE]

still doesn't fix the EX58 Ram timing misinformation bug.
Apart from it now showing my cas at a much lower setting then normal i don't see any thing new.

[cpuz]

Thanks for the dumps Stasio.
The X58 timings are partially fixed, however there are still problems. The location I read regs from may be cleaned by a C3-state. But this is the most reliable source so far.

I'm improving 1.49 to reduce the starting duration, on most systems it will be drastically faster.
If you are interest in a test drop me a PM mentionning what chipset you are using & your email address.

Thanks guys !!

[xsbb]

Thanks for your contributions to the community cpuz!

I'll be looking forward to your changes in 1.49

[msgclb]

CPU-Z 1.48.5

Now with configuration file

With the previous Intel processors we could change the CPU-Z configuration file option to Sensor=0 and read Core VID. This clearly doesn't work with the Core i7. Do you have plans to add this option?

[Xope_Poquar]

Just wondering, does everybody pronounce it "see pee you zee" or does anyone call it "kahpuhz" like me?