Sure here you go.Originally Posted by kitfit1
Code:>CPU Feature: Thermal Management Control.......... - Disabled PPM(EIST) Mode...................... - Disabled Limit CPUID MaxVal.................. - Disabled CIE Function........................ - Disabled Execute Disable Bit................. - Disabled Virtualization Technology........... - Disabled Core Multi-Processing............... - Enabled >DRAM Timing: Enhance Data transmitting........... - Fast Enhance Addressing.................. - Fast T2 Dispatch......................... - Auto >Clock Setting Fine Delay Press Enter: DLL And RCOMP Settings.............. - Auto Ch1 Dram Defaul Skew................ - Model 3 Ch2 Dram Defaul Skew................ - Model 3 RCOMP Settings...................... - Model 1 Fine Delay Step Degree.............. - 70ps Ch1 Clock Crossing Setting.......... - Relaxed DIMM1 Clock Fine Delay.............. - Current[2396ps] DIMM2 Clock Fine Delay.............. - Current[2396ps] Ch1 Control0 Fine Delay............. - Current[268ps] Ch1 Control1 Fine Delay............. - Current[268ps] Ch1 Control2 Fine Delay............. - Current[268ps] Ch1 Control3 Fine Delay............. - Current[268ps] Ch1 Command Fine Delay.............. - Current[394ps] Ch2 Clock Crossing Setting.......... - Relaxed DIMM3 Clock Fine Delay.............. - Current[2066ps] DIMM4 Clock Fine Delay.............. - Current[2066ps] Ch2 Control0 Fine Delay............. - Current[48ps] Ch2 Control1 Fine Delay............. - Current[48ps] Ch2 Control2 Fine Delay............. - Current[48ps] Ch2 Control3 Fine Delay............. - Current[48ps] Ch2 Command Fine Delay.............. - Current[394ps] Ch1 Ch2 Common Clock Setting........ - Relaxed Ch1 RDCAS GNT-Chip Delay............ - Auto Ch1 WRCAS GNT-Chip Delay............ - Auto Ch1 Command To CS Delay............. - Auto . Ch2 RDCAS GNT-Chip Delay............ - Auto Ch2 WRCAS GNT-Chip Delay............ - Auto Ch2 Command To CS Delay............. - Auto Flex Memory Mode..................... - Auto CAS Latency Time (tCL)............... - 5 RAS# to CAS# Delay (tRCD)............ - 5 RAS# Precharge (tRP)................. - 5 Precharge Delay (tRAS)............... - 12 All Precharge to Act................. - 5 REF to ACT Delay (tRFC).............. - 30 Performance Level.................... - Auto >Read delay phase adjust Press Enter: Channel 1 Phase 0 Pull-In........... - Auto Channel 1 Phase 1 Pull-In........... - Auto Channel 1 Phase 2 Pull-In........... - Auto Channel 1 Phase 3 Pull-In........... - Auto Channel 1 Phase 4 Pull-In........... - Auto Channel 2 Phase 0 Pull-In........... - Auto Channel 2 Phase 1 Pull-In........... - Auto Channel 2 Phase 2 Pull-In........... - Auto Channel 2 Phase 3 Pull-In........... - Auto Channel 2 Phase 4 Pull-In........... - Auto Write to PRE Delay (tWR)............ - 13 Rank Write to Read (tWTR)........... - 12 ACT to ACT Delay (tRRD)............. - 3 Read to Write Delay (tRDWR)......... - 8 Ranks Write to Write (tWRWR)........ - Auto Ranks Read to Read (tRDRD).......... - Auto Ranks Write to Read (tWRRD)......... - Auto ALL PRE to Refresh.................. - Auto >Voltage Settings: CPU VID Control..................... - 1.33125V CPU VID Special Add................. - Enabled CPU VID Special Add................. - Auto DRAM Voltage Control................ - 2.27v SB Core/CPU PLL Voltage............. - 1.55v NB Core Voltage..................... - 1.455v CPU VTT Voltage..................... - 1.24v Vcore Droop Control................. - Enabled Clockgen Voltage Control............ - 3.60v GTL+ Buffer Strength................ - Strong CPU GTL 0 REF Volt.................. - 0.6225 CPU GTL 2 REF Volt.................. - 0.6225 CPU GTL 1 REF Volt.................. - 0.6225 CPU GTL 3 REF Volt.................. - 0.6225 North Bridge GTL 0 REF Volt......... - 0.6275 North Bridge GTL 1 REF Volt......... - 0.6275 FSB Vref............................ - Auto Genie BIOS Settings: Exist Setup Shutdown................ - Mode 2 Exist Shutdown After AC loss........ - Enabled AC Shutdown Free.................... - Enabled O.C Clock Fail Retry Counter........ - 0 O.C Clock Fail CMOS Reloaded........ - Disabled CPU Clock Ratio..................... - 6 Target CPU Clock.................... - 3303MHz CPU Clock........................... - 550 Boot Up Clock....................... - Auto CPU Clock Amplitude................. - 800mV CPU Clock0 Skew..................... - 200ps CPU Clock1 Skew..................... - 0ps DRAM Speed.......................... - 333/667 Target DRAM Speed................... - 1101MHz PCIE Clock.......................... - 100mhz PCIE Slot Config.................... - 1x 1x CPU Spread Spectrum................. - Disabled PCIE Spread Spectrum................ - Disabled
Reply With Quote
you givin me the itch for another dfi board
1240mhz@2.02v 
E8500 @ 4.5GHZ DDR1186 9.5H Prime Blend Stable
Bookmarks