agreed, and then someone's gonna come around, telling about a hose that got detached from the pump or the radiator, and ask "how the hell could that happenOriginally Posted by Anemone
, you guys think my mb is still OK etc...etc..." Just to say that not using clamps on hose/barbs or compression fittings all the way is suicidal. Accidents ? Some of you guys are just asking for it
[SIGPIC][/SIGPIC]
As long that the tube is 7/16" ID I dont see the need for clamps or zips.
E8400@4.7ghz on EK-Supreme
4870x2 Asus
Asus Maximus II Formula
Mushkin 1000MHz 4x2048MB
320x2 WD scorpio Black Raid0
1tbx2, 500gb, 200gb, 250gb
Swiftech MCP355 and MCP350
XSPC Reservoir top x2
Swiftech MCR220-QP
Swiftech MCR320-QP
Black Ice GT Stealth 120 XFlow
All fatboy!
This is my version of Lian Li 343b
Hope U like IT
BP Rotary fittings . . .. .
Take a night shot!TouGe nice build
BP fittings l00ks perfect ;]Thanks guys...Definitely loving the BP fittings.
Who are you talking to? All my fittings are clamped with the exception of the BP fittings on the DD block. I'm not concerned about leaks since I can barely pull the tube from the fitting to begin with, so......
QX 9650 | Maximus II Formula | G.SKILL 4GB (2 x 2GB) PC2 8500 | Sapphire 4850 X2 2GB| Auzen X-Fi Prelude 7.1 | 3x's WD 150GB Raptors & 2x's 1TB Seagate 7200.11 | Silverstone OP1200 | SilverStone TJ07 | Dell 2707WFP
EK-RES 250 --> Swiftech MCP655 --> Apogee GTZ --> Enzotech Sapphire NB --> Feser X-Changer 360
The pump placement and general layout is the best i have ever seen
“You Americans are so gullible. No, you won’t accept communism outright, but we’ll keep feeding you small doses of socialism until you’ll finally wake up and find you already have communism. We won’t have to fight you. We’ll so weaken your economy until you’ll fall like overripe fruit into our hands." Nikita Khrushchev
indeed, layout is almost perfectThe pump placement and general layout is the best i have ever seen
such short tubing runs
}{ my photoBLOG
Canon 5D | Canon 17-40 F4L | Canon 135 F2L | Sigma 70 F2.8 EX Macro | Manfrotto CXPRO4 | Markins Q3 | Lee filters
I think horizontal layout is better in terms of GPU waterblocks coz usualy they are very heavy and they tend to bend a card. with this configuration it does not matter how heavy gpu block is.
Will not bend a card.
Thanks for comments
Matias23, what coolant is the yellow?
i5 750 @ 3.2 Ghz, stock volts on stock cooling
4GB G.Skill DDR3-1600 7-7-7-21
Gigabyte P55-DS2
EVGA GTX260 192shader
f1 one i think
Matias23 very nice man
ps check inbox
~~~~~~~~water ed ~~~~~~~~~~
Sry 4 my english
http://galeriawc.pl
is that aimed at me?
its been built abuot a year now with no leaks, its 7/16 tubing over fat 1/2" barbs and its so tight I needed to heat the ends of the tubing in boiling water to get them over the barbs and getting them back off again is a nightmare.
I'm happy, I know what I'm doing tbh been around the block a few times on this and I'm much happier with 7/16 and no clips/ties than with 1/2" with clips etc... the tubing is literally moulded onto the barbs.
no is not yellow is orange but 4 me should be more orange.
Irregardless, should your pump die, your tubing will heat up and pop off at the weakest link.
It's happened to a couple people recently and is not fun.
Hello
my system at night how to find their quality?
MoBo-->Asus Rampage II Gene Cpu-->Intel i7 920 @3.2 GHz GrKa--> NVIDIA GeForce 260 GTX (55nm) Case-->LianLi V1200B
WaKü-->Laing pro@ultra, EK supreme, EK NB, BlackIce GTS Tripple --> Nanoxia
Thats a chance I'm prepared to take tbh
matt100 Sweet build! Very similar to what I am trying to achieve! Except my case is smaller and probably not quite as well built! I really only have space for one internal loop. If I add a second one it will have to be external, which is not what I am after.
emu
Gir92 love your setup!!
custom case
I7 2600
GIGABYTE P67A-UD7 b3
8gb gskill ripjaw 1333 ram
Samsung f3 1tb hdd
my first custom case build
Can you refresh my memory GirWhy the SLI bridge?
So I don't lose itCan you refresh my memory Gir
I will eventually be going sli, and I'd rather not have to buy a new bridge because I lost the bridge.
Hmm yes I can see how people could lose these
I lost one and just found it a few days ago lol
Hmm yes I can see how people could lose these
lol i have a pile of computer parts that i keep my xfire bridges in. if i ever need them someday ill just have to sift through all of it.
Here you goBP Rotary fittings . . .. .
Take a night shot!
QX 9650 | Maximus II Formula | G.SKILL 4GB (2 x 2GB) PC2 8500 | Sapphire 4850 X2 2GB| Auzen X-Fi Prelude 7.1 | 3x's WD 150GB Raptors & 2x's 1TB Seagate 7200.11 | Silverstone OP1200 | SilverStone TJ07 | Dell 2707WFP
EK-RES 250 --> Swiftech MCP655 --> Apogee GTZ --> Enzotech Sapphire NB --> Feser X-Changer 360
Wow.
That looks really cool duder
Hark children of the Resolution !!
Posting Permissions
Bookmarks