Im adding in readpoints, may as well add voltmods at the same time
I could hopefully figure them out myself...but if anyone already knows the mods please feel free to save my time
K
Im adding in readpoints, may as well add voltmods at the same time
I could hopefully figure them out myself...but if anyone already knows the mods please feel free to save my time
K
Originally Posted by T_M
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
I'm working on this board as of...yesterday m8.
Just checked the board for some measurement points ( more to come tomorrow, need to hook up with my bed now)
I'll work out the "Vmods" tomorrow.
Some voltage measurement points for the P5E64 WS Evolution:
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.), Juan J. Guerrero
good to show us the measure points
As for the voltage mods.... who will ever need more than 2.1v in cpu?
2.1V ? Say 2.3V! Me... if I was running 65nm chips now
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Voltmods arent just about raw volts, its about precision and control
Thanks for the pic Bill- gave me an easier alternative VDIMM measure point- I was gonna solder to the pin on the underside. Got everything shaped and ready to solder but too damn tired after work.
Do you have a PLL readpoint?
Cheers,
K
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
I'll focus on this motherboard today, and try to find all the measurement points and mods and do some testing as well.
If everything goes well, I shall have new pictures with more reading points & mods in the evening or late night.
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Updated pic with the following voltages measurement points:
CPU Voltage ( Vcore )
RAM Voltage ( Vddr )
NorthBridge Voltage ( Vnb )
SouthBridge SATA/PCI-E 1.5V Voltage ( Vsb_pcie )
FSB Termination Voltage ( Vfsb ) [ aka VTT Voltage ]
DDR3 RAM Termination Voltage ( DDRvtt ) [ Vddr_vtt ]
CPU PLL Voltage ( Vpll )
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Last edited by K404; 07-20-2008 at 02:59 PM.
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
Sorry for not making any progress, I'm having a hard time balancing my time lately.
Too many... things to do, so little time ( hmmm... I could swear I'm hearing a chic singing "I'm just a girl, taking your time"
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Same
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
Im finding that VDIMM overvolts around 0.08V, VCore, vNB and vPLL are pretty accurate compared to BIOS.
Thanks for the info on readpoints!
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
My pleasure to help mate
I'm working on the rest slowly unfortunately ( my life has become very very complicated and out of control lately
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Awesome job Kenny, looks quite sweet...
Thanks Oliver
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
this board any good? it overclock?
It does pretty nicely actually.
Just read the two/three dedicated threads about it.
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
will do, am looking for a new board, and want something that clocks well but not everyone and their uncle has.
BenchZowner, I am curious, what is your SB temp.?
I will take a look tomorrow and I'll let you know.
I have changed the thermal paste under the stock heatsinks however ( I assume that they'd be a bit hotter with the stock TIM ) [ it sucked at least when I was removing it
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Hm, yeah. I have this board running at default settings. I couldn't even touch the SB heatsink for more than 3 seconds. I ended up changing the volt. to 1.05v (I think). Still, it runs too hot. I thought it was normal for the ICH7R chip, no? I guess I'll have to change the thermal paste.
With the SB voltage at stock, and 26C room temp, the SB is at 42C at the moment ( currently having some IO as I'm encoding a AVI file to MPEG-2 format for DVD Authoring ).
I can touch the heatsink, I can touch the heatsink
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
Any Update on OVP or other mods available...?
@Dumpler: Hi, you only have to bridge 2 pins near the CPU_Fan pins. There are 3 points with a label "OVP_CPU" or something like this. I soldered a switch and that's all
Alex
MOA 2010 EU finals #3
GOOC 2010 Italy #2
GOOC 2009 Italy #1
Posting Permissions
Reply With Quote
Bookmarks