**Unified** DFI LanParty UT 790FX-M2R-M2RS / Phenom /Data Base Thread**

[justapost]

HD995ZFAJ4BGH JAAHB AA 0820APMW

just arrived.

For comparison 9850 power consumption and temps at stock:

Idle: 153,7W CPU 21°C CORES 33°C
Load: 243 W (everest julia)
Load: CPU 42°C CORES 45°C (coredamage 5mins)

9950BE at 2.5GHz 1.3V

Idle: 169W CPU 27°C CORES 26°C
Load: 267W (everest julia)
Load: CPU 52°C CORES 45°C

So the 9950BE requires ~15W more than the 9850BE here, temp reading seems more correct on the 9950BE.

[justapost]

HD995ZFAJ4BGH JAAHB AA 0820APMW

just arrived.

For comparison 9850 power consumption and temps at stock:

Idle: 153,7W CPU 21°C CORES 33°C
Load: 243 W (everest julia)
Load: CPU 42°C CORES 45°C (coredamage 5mins)

9950BE at 2.5GHz 1.3V

Idle: 169W CPU 27°C CORES 26°C
Load: 267W (everest julia)
Load: CPU 52°C CORES 45°C

So the 9950BE requires ~15W more than the 9850BE here, temp reading seems more correct on the 9950BE.

With my temp issues fixed i reran the power test

Idle: 152,5W CPU 22° CORES 23°C (lower core temps than the 9850 and equal cpu temps now).
Load: 244W (everest julia)
Load: CPU 47°C CORES 37°C

So my results are opar with most reviews showing an nearly equal power consumption.

[justapost]

I have been upto FSB216 i was aiming for 1150-1200

Hmm 533MHz * 216/200 = 1151,28MHz

[Final8ty]

Hmm 533MHz * 216/200 = 1151,28MHz

Yep & highly unstable even with max 2.3v & timings as loose as the bois would go on everything but is stable at 1066 5,5,5,16 on 1.90v

[RobPuba]

I RMA my current MB and was thinking about getting the DFI Lanparty UT 790FX-M2R. I've notice the CPU socket is real close to the Ram, the ram I have is tall (Look in my signature). I'll also will be getting the 9950, what heatsink will fit

[RobPuba]

BUMP Now somebody should want to answer my question....

[Brother Esau]

The Tuniq 120 just makes it with the Reapers and I mean barely The Zalman 9700 fits fine even with OCZ Flex

[SocketMan]

BUMP Now somebody should want to answer my question....

Got Enzotech's "EXTREME-X"(ultraX)
it has the pipes facing the other way
plus it blows air on the ram

http://www.ncix.com/products/index.p...cture=EnzoTech

[imamage]

I RMA my current MB and was thinking about getting the DFI Lanparty UT 790FX-M2R. I've notice the CPU socket is real close to the Ram, the ram I have is tall (Look in my signature). I'll also will be getting the 9950, what heatsink will fit

I am using Ultra 120 Extreme with my Crucial / Team Combo RAM
The heatsink of the RAM barely missed the CPU heatsink
(Sorry for the HD3870 blocking the view & messy case ...)

[RobPuba]

I am using Ultra 120 Extreme with my Crucial / Team Combo RAM
The heatsink of the RAM barely missed the CPU heatsink
(Sorry for the HD3870 blocking the view & messy case ...)

The ram I have is taller, because of the heatsink........
Anybody using the with the D.F.I LanParty UT 790FX-M2R ?

[Oese]

With my temp issues fixed i reran the power test

Idle: 152,5W CPU 22° CORES 23°C (lower core temps than the 9850 and equal cpu temps now).
Load: 244W (everest julia)
Load: CPU 47°C CORES 37°C

So my results are opar with most reviews showing an nearly equal power consumption.

should be same consumption i think?

btw, did the pwm-watercooler arrive?

[justapost]

should be same consumption i think?

I expected higher amp requirements due to a higher TDP(16%) at an equal voltage with just an 4% frequency increase.

btw, did the pwm-watercooler arrive?

Yepp I rasped the longer side down ~1-2mm and now it fit's. Did not adjust the length so i have a ~5-10mm overhang.
I did not yet connect it to the watercooling because i want to test the 9950be in the m3a with that wc.