Yes in a way, there are also many other things that you could use them for with regards switching, there is timer switching, controlled switching in fact all kinds of control operated switching whether it be digital or analogue so the options are unlimited where precise switching is required for heavy loads.
Just received the new Evaporator from tom ( SoddemFX )
it’s a new revision V8-R and has a hot gas by-pass system
Although i won’t be using this function to begin with its good to know
i have it if decide i need it for cold bug cpu’s as this function will allow me to increase
The evap temp and aid in booting with cpus that won’t play ball
thanks to tom she is a beauty
Last edited by bazx; 05-31-2008 at 04:30 AM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
here is the mount dis-mount box
taps used are from commercial a/c and have hex drive tap with brass cover
and a service point built in
the taps are mounted to a steel 90 deg angle bracket in the base which is sandwiched between 18mm on mdf on the top
and 36mm on the base
the box will be air tight when in use
still to be insulated with 25mm thick foam same as the hx boxes
Last edited by bazx; 05-31-2008 at 05:53 AM.
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
![Send a message via Yahoo to [XC] 2long4u](images/misc/im_yahoo.gif)
That evap is beautiful!
Free Omastar!Originally Posted by [XC] Kayin
[SIGPIC][/SIGPIC]
woah crazy, mad and cool stuff there bazx !
---
very nice evap indeed! The more fins the better, just not sure i like the triangular design of the solid copper column in the middle. I understand the idea was to be thicker at the base to absorb more heat, but I think you need a little more refrigerant there directly over the die instead of copper to provide more adequate cooling of the cpu. just my opinion tho. lookin good!
yikes! the machining is incredible!
Are those 1mm slots? whats overall heigth?
great work to tom...
mentally confused and prone to wandering
I absolutely love how the wiring is labled, and very super clean. This is one of the nicest cascades I have seen!Magnetic contactors.
Sacha35 did a superb job on the wiring & components ,Neat,securely mounted and labeled. The way it should be......
CPU: Q9450 W/ Tuniq 120RAM: (8 GB) 4x2 gb Patriot Extreme 800MB: Asus RampageHDD: 2 x 500GB 32MB Cache Storage, 1 x 750GB 7200.11 SATAPSU: Coolermaster 750W RealPower ProGPU: 4870 1GBCase: Lian Li V1100B Plus ModdedOS: Vista Ultimate x64 SP1LCD: Samsung 22" 226BW / Gateway 22" LCDSound: HT Omega 7.1 Striker
I love your stainless flex lines mate
If you have a cooling question or concern feel free to contact me.
Beautiful work bazx, as expected
You've got a lot of new ideas in here. Any performance targets?
the evap looks like...
damn so good it looks da evap
This is same design evap used on High voltage Quads on Skull Trail setup. Worked SUPERB.
soddemFX is a master Guru with phase/cascade RESPECT .......
I want to see -125 @ 300w hehe
Superb evap, mate!
German Phase Change Builder - Drop me a PM!
Beautiful work bazx, as expected
You've got a lot of new ideas in here. Any performance targets?
well with this unit G i have put every thing in place to get the most r14 will let me have
also this is my first time with this gas so will just have see what she does
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
seems like brits are doing major damage
a true work of art!
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
any picures of the mountingkit?
this is still on my todo list tim
should have something next week
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
I like the thick bottom. It has a ton of mass and is supported by the thinner top. I think that is a superior evap design.
Free Omastar!
[SIGPIC][/SIGPIC]
Beautiful work
You have a really nice idea
Battlefield 3: Nachthymnen666
amazing work m8... overall design quality and execution are second to none. hands down the nicest cascade Ive ever seen (now we wait for performance
Thanks lads
Got the 1st stage under pressure yesterday 20 bar for leak testing and she still holding after 24 hour so fingers crossed
Also mounted the 3rd stage expansion tank for R14
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Awesome
Hopefully when you bring this places they can power it :P
If you have a cooling question or concern feel free to contact me.
nice!
No sightglass?
Expansiontank is really hugeBut will be helpfull when you want an really save static pressure of course.
i dont fit them any more as i never look anywayNo sightglass?
the tank is 5.8l and i hope this will help with the static R14 when not in use
i have two of them but have decided to leave the R23 expantion out as i have never had a problem with this gas @ static
1. The first rule of Bench Club is, you do not talk about Bench Club
2. The second rule of Bench Club is, you do not talk about Bench Club
3. If someone says stop, goes limp, taps out, the the benching is over
4. No bummers in the batcave, apart from unkie dave
5. One Bench at a time
6. No air, no water
7. Benching will go on as long as they have to
8. If this is your first night at Bench Club, you have to Bench
Looking good Baz, loving the pipe work mate nice and clean lines.
Posting Permissions
Reply With Quote
Bookmarks