Page 2 of 16 FirstFirst 1234512 ... LastLast
Results 26 to 50 of 377

Thread: ABit AX78 Overclocking/Stability

  1. #26
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    i used to have abit mobo (AN-M2) but my problem there was the temp reading (quite high)..but if somebody can give a good review out there this will perhaps be my next mobo...
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  2. #27
    Xtreme Mentor
    Join Date
    May 2007
    Posts
    2,792
    I'll have this board very soon, can get it in 2 days but am on holiday till after 10th.

  3. #28
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    Quote Originally Posted by KTE View Post
    I'll have this board very soon, can get it in 2 days but am on holiday till after 10th.

    cool! looking forward to it...
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  4. #29
    Xtreme Cruncher
    Join Date
    Apr 2006
    Posts
    323
    Yeah looking forward to seeing some results out of it. I'm still tempted by one, just wanting to see some results with it to see if it's worth an early upgrade or wait until I'm actually changing CPU.
    Main Rig

    AMD Athlon X2 3800+ @ 2.8GHz (10x 280MHz) | ABit Kn9 NF4 | 4GB GSkill DDR2 - 800MHz | ATi Radeon HIS HD3870 | 530w Hiper Type M PSU

    80GB Western Digital SATA300 Boot Drive | 500GB Western Digital SATA300 Storage Drive | 400GB Western Digital SATA300 Storage Drive | 400GB Seagate Barracuda UDMA IDE Storage Drive | 200GB Samsung Spinpoint UDMA IDE Storage Drive | 160GB Western Digital SATA300 Storage Drive

    Windows Server 2008 x64 | Dual Screen: 20" TFT @ 1920x1080 | 19" TFT @ 1440x900

    Media Streaming Rig/Spare PC

    Intel Pentium 4 @ 2.8GHz | Generic Motherboard | 768mb Kingston DDR - 400MHz | ATi Radeon 9250SE | 350w AOpen PSU

    20GB Western Digital IDE Drive

    Windows XP Professional x86 w/SP3 | TV/Monitor @ 1920x1080

    Entertainment Centre

    40" Sony Bravia @ 1920x1080 | Sony Playstation 3 | Microsoft Xbox 360 (RED RING OF DEATH)



  5. #30
    Brotherhood
    Join Date
    Apr 2005
    Location
    Land Of KADISOKA
    Posts
    1,227
    This my short test with this board...I still waiting my X2 5000+ BE with all test...

    http://valid.x86-secret.com/show_oc.php?id=321347







    Still continued with all my test !!!
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  6. #31
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    seemes its a promising board...


    what bios version did you used?any temp monitoring on those PWM?


    does this supports 125w cpu's?
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  7. #32
    Brotherhood
    Join Date
    Apr 2005
    Location
    Land Of KADISOKA
    Posts
    1,227
    @madfaze : Using bios 12B01....I will try later with 125w cpu's....
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  8. #33
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    Quote Originally Posted by Hazzan View Post
    @madfaze : Using bios 12B01....I will try later with 125w cpu's....

    cool!...

    are there any PWM monitoring temp?NB temp? etc..

    what other temps can these mobo monitor?
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  9. #34
    Xtreme Enthusiast
    Join Date
    Feb 2007
    Location
    Norway
    Posts
    704
    would believe it supports 125w Athlons as it supports phenom and got a eight pin 12v for the cpu

  10. #35
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    are there any benefits on havin' 8pin on 12v?


    what are the difference on havin only 4pin?
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  11. #36
    Xtreme Enthusiast
    Join Date
    Feb 2007
    Location
    Norway
    Posts
    704
    It can supply more power at more stable voltages. It is basically two p4's connected I believe.

  12. #37
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    hmm can this be done with k9a2 platinum it has 4pin molex connector but i believe this is fot graphic card feature...
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  13. #38
    Xtreme Member
    Join Date
    Jul 2005
    Location
    London, UK
    Posts
    386
    How do those results above compare with previous motherboards? 280HTT is hardly anything to get excited about, but it would be great to see 400!

    The board supports all 125W CPUs, I have looked at the compatibility sheet on the abit site.

    It should monitor PWM temps if you use Speedfan. I believe my board does with the "AUX" sensor.
    I MSI P67A-GD65 I Intel i5 2500K I 8Gb Samsung I
    I Corsair F3 60Gb I AMD 6850 I Dell SP2208WFP I Windows 7 x64 I
    I Current Speed: 4.5Ghz I RAM 1866Mhz @ 9-9-9-27 1T I
    I Laptop I Acer 1830T I Intel i5-470UM I Crucial M225 I 4Gb DDR3 I

  14. #39
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    how about the NB and SB?does it read temps?
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  15. #40
    Registered User
    Join Date
    Aug 2007
    Location
    made in indonesia
    Posts
    69
    i have ax78 w/phenom 9600 , the temp show 50-55c running 2.645Ghz
    are that temp is currectly right r just the board can`t read the temp phenom 9600??
    my colling is noctua NH-U12P

    sori my english is bad..

  16. #41
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    can you post some screenie...
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  17. #42
    Xtreme Enthusiast
    Join Date
    Feb 2007
    Location
    Norway
    Posts
    704
    Hazzan: What is max voltage for cpu, ht link, nb, sb, mem, and how is mem tweaking options on the board? Sbtimings/drive strenghts tweakable?
    How is the vdroop? I'm close to buying this board now..

  18. #43
    Xtreme Enthusiast
    Join Date
    Aug 2004
    Location
    Scotland
    Posts
    609
    if it holds true to form it will be CPU VID plus a set amount (i.e. max Vcore will vary according to installed CPU).
    On my 5000+ Black it's 1.30 min, 1.67V max
    Vdimm is 1.80- 2.50V
    nb 1.8V max 2.35V
    nb 1.1V max 1.90V
    sb 1.2V max 1.57V
    HT max 1.50V
    abit IP35 Pro, E6600, HD3870, FSP FX700-GLN
    abit AB9 QuadGT, E6400, 7900GTO, FSP FX600-GLN
    abit AX78 x2
    Asus P5N-E SLI, E6600, 8800GTS, Tagan 530W

  19. #44
    Xtreme Enthusiast
    Join Date
    Feb 2007
    Location
    Norway
    Posts
    704
    Thanks Heidfirst, then it's an AX78 for me too

    Update: Ordered.
    Last edited by LIKMARK; 03-02-2008 at 09:19 AM.

  20. #45
    Xtreme Cruncher
    Join Date
    Apr 2006
    Posts
    323
    Anymore Phenom results for this yet?
    Main Rig

    AMD Athlon X2 3800+ @ 2.8GHz (10x 280MHz) | ABit Kn9 NF4 | 4GB GSkill DDR2 - 800MHz | ATi Radeon HIS HD3870 | 530w Hiper Type M PSU

    80GB Western Digital SATA300 Boot Drive | 500GB Western Digital SATA300 Storage Drive | 400GB Western Digital SATA300 Storage Drive | 400GB Seagate Barracuda UDMA IDE Storage Drive | 200GB Samsung Spinpoint UDMA IDE Storage Drive | 160GB Western Digital SATA300 Storage Drive

    Windows Server 2008 x64 | Dual Screen: 20" TFT @ 1920x1080 | 19" TFT @ 1440x900

    Media Streaming Rig/Spare PC

    Intel Pentium 4 @ 2.8GHz | Generic Motherboard | 768mb Kingston DDR - 400MHz | ATi Radeon 9250SE | 350w AOpen PSU

    20GB Western Digital IDE Drive

    Windows XP Professional x86 w/SP3 | TV/Monitor @ 1920x1080

    Entertainment Centre

    40" Sony Bravia @ 1920x1080 | Sony Playstation 3 | Microsoft Xbox 360 (RED RING OF DEATH)



  21. #46
    Xtreme Enthusiast
    Join Date
    Feb 2007
    Location
    Norway
    Posts
    704
    The board is under way, so I'll be posting some results in a few days I believe. I'm not sure if I'm gonna continue with Vista x64 or revert back to the good old XP 32 bit though..

  22. #47
    Xtreme Cruncher
    Join Date
    Apr 2006
    Posts
    323
    Well with 4GB of RAM you might want to stay on 64.

    Also, when you switch between boards will Vista survive it without getting buggy, I could never make XP do that.
    Main Rig

    AMD Athlon X2 3800+ @ 2.8GHz (10x 280MHz) | ABit Kn9 NF4 | 4GB GSkill DDR2 - 800MHz | ATi Radeon HIS HD3870 | 530w Hiper Type M PSU

    80GB Western Digital SATA300 Boot Drive | 500GB Western Digital SATA300 Storage Drive | 400GB Western Digital SATA300 Storage Drive | 400GB Seagate Barracuda UDMA IDE Storage Drive | 200GB Samsung Spinpoint UDMA IDE Storage Drive | 160GB Western Digital SATA300 Storage Drive

    Windows Server 2008 x64 | Dual Screen: 20" TFT @ 1920x1080 | 19" TFT @ 1440x900

    Media Streaming Rig/Spare PC

    Intel Pentium 4 @ 2.8GHz | Generic Motherboard | 768mb Kingston DDR - 400MHz | ATi Radeon 9250SE | 350w AOpen PSU

    20GB Western Digital IDE Drive

    Windows XP Professional x86 w/SP3 | TV/Monitor @ 1920x1080

    Entertainment Centre

    40" Sony Bravia @ 1920x1080 | Sony Playstation 3 | Microsoft Xbox 360 (RED RING OF DEATH)



  23. #48
    Xtreme Enthusiast
    Join Date
    Feb 2007
    Location
    Norway
    Posts
    704
    That's what I was wondering about too, if it does, I'll stay with Vista x64 I think.

  24. #49
    Xtreme Member
    Join Date
    Nov 2007
    Location
    philippines
    Posts
    279
    more pics...
    AMD Athlon 64 x2 6000+ AM2 CCB8F 0740 FPMW
    MSI K9A2 Platinum v1.2
    4 x 1GB Corsair XMS2 (rev 5.1 and rev 5.2)
    Zalman CNPS9700LED
    PowerColor ATi HD 3870 512MB DDR4 256bit PCIe 2.0
    Corsair TX750 Watts (12v @ 60A on a single rail)
    80 GB WD SATA I (primary)
    250 GB WD SATA II (backup)




  25. #50
    Xtreme Mentor
    Join Date
    May 2007
    Posts
    2,792
    Works fine here. Booted a tester 9600 BE which the owner said "has 3rd core faulty" perfectly first time.

    Only tried once though. Nice little CMOS clear switch at the back panel, BIOS looks amazing for any board.

Page 2 of 16 FirstFirst 1234512 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •