Great info there ECH. Was wondering about the guy who had problems with his 8800gt and quattro 850, I didn't read what kind of problems he was having???
Ply
so far my limits are 734/1890/2000 .. havent even bothered oc mem .. as performance gain is minimal.. or like 0 ....
i have 1 card that can go 776 on core, the other one @ 734 .. both can do 1890 shaders .. oh i have thermalright 03 on 1st card and Zalman VF900 on 2nd card ... it gets to about 57C max during crysis ...
waiting for some full block to release ....
E6600 @ 3.6
IN9 32x MAX
EVGA 8800Ultra
750W
169.02
msi 8800gt oc 660/950/1650 stock. (355aud from umart brisvegas.)
4300@3.0GHz
3d06: 11850
@720/950/1800 (shader linked to core clk rivatuner2.06)
3d06: 12075.
tried 700/1000/1900 3d06 shat itself...eithermem or shaders dint like it that high..thinking maybe mem...?
er um 96pussent with stock fan/sink via riva.
room temp 25c idle temp 46c...dont know how to measure load temp on gpu. atitool .27 dont work with this card/drivers or something.
i could probably go a little higher on the core/shaders...for a few more points...
crysis 1600x1200 all settings HIGH...25-30 fraps 2x AA..playable.
Last edited by adamsleath; 11-01-2007 at 06:09 PM.
i7 3610QM 1.2-3.2GHz
It came in today and I must say I'm quite impressed.
I played sega rally (1280x1024) and it stood up to an easy 55-65fps with a few drops in the high 40's.
Crysis in directx9 all high and 4x (1280x1024) was around 25-35fps and played very well.
In directx10, I put all settings on very high, 1280x1024 (4x enabled) and It crawled at 6-14fps.
Once you get out of the main area and go to where the light comes on, thats where everything just crawls (6-7fps)
So if thats the case, the next card has to be 4-6x faster in order to play this game well at all high settings on direct10 as well better driver tweaking.
Quake wars played great with all settings on high and 16x enabled. Anywhere from 30-45fps, but held steady. The older gts was around 24-35fps.
I haven't put the waterblock on yet, thats for tomorrow. The fan is very loud at 100%.. It sounds like a whistling firework
This was at 740/1850/1000 (x3210 oc to 2.8) and 2 gigs at 1066 crucial ballistix with the latest drivers.
I really like this card and it should hold me off until the 1 terrabyte card is released.
I will say this and this is very important, skip the gts.
There are no other games other than crysis that need that kind of speed, so there is no reason to pay $100 extra for 20-30% better. It's like having a ferrari but driving through downtown stop and go traffic. What we need is 2-3x better.
Save your money and wait for the powerhouse card to come out.
Last edited by Eddie3dfx; 11-01-2007 at 06:10 PM.
Asus P6T, I7-920, 6gb ocz xmp, 4890, Raid 0-1 Terabyte, full watercooled - Triple Loop 5 radiators
Lol, lost me with that one.
But anyway, tried powering just the card from a different psu and got the same results. Screen freezes, mouse stays active for a few seconds afterward then freezes, then screen goes black and few seconds later machine reboots itself. So I tkink the psu is ok. Would really like to know what the other guy was experiencing...
Ply
Nope just this card. My ati x1900xt still runs like a champ, and its been liquified, diced, cold air, the whole business. Never have had an Ati card flob on me...
Ply
1280x1024 4xaa ...up to 34 fraps
crysis
yer if card dont work take it back/refund get another one...or get a 38xx
yes 4x aa is good...and should be the minimum imo.
virtually no jaggies....which means this card is ok for 1280x1024 with 4xaa for crysis. imo.
dx9 feels good looks good.
crysis still needs bigger betta card for dx10 higher settings i reckon.
Last edited by adamsleath; 11-01-2007 at 06:28 PM.
i7 3610QM 1.2-3.2GHz
Edit: Wait a minute how did you remove the Cat drivers?
Did you uninstall as normal then:
-use driver cleaner in safe mode
-use ccleaner's tools and issue options to remove any stragglers?
-also removed the ATI hidden devices such as the 1900 and the ATI T200 unified avstream drivers?. Here is how you do it.
[SIGPIC][/SIGPIC]
well surely he removed all the ati drivers /catalyst centre????
okHave you tried atitool .26, both work for me on the temp as well as speedfan
yes uninstalled 0.27 and installed atitool 0.26 and the gcard shows up as normal
Last edited by adamsleath; 11-01-2007 at 06:37 PM.
i7 3610QM 1.2-3.2GHz
http://www.gametrailers.com/player/27249.html
notice something wired about this video!!! check out the specs
Rig:
CM Stacker STC-T01
P5N-E SLI
E6600
7900GTO
2GB Mushkin EM2
Corsair 520HX
X-fi XtremeGamer
20" 2007FPW
so far 734/1890/2000 seem to be max for both cards ... tried oced shader higher to 1944 (the next clock) it would crash crysis after~3mion of gameplay
as long as its crysis stable, stable enough for me
E6600 @ 3.6
IN9 32x MAX
EVGA 8800Ultra
750W
i turned on 8x af and aa supersampling...now i seem to have some frothy bits at the waters edge and more "mist" in the distant foliage ..anywho it seemed to improve the picture slightly...
im on 730/1950mem/1825shader....
1280x1024 4x aa 8x af supersampling...crysis..looks pretty good ion my screen anyway.
it's slightly better frames than 1600x1200 2x aa.
cod4 is a pieca pi$$ max out all setting for 80-120 fps depending on the action @1600x1200.
i'm just assuming this is a slight improvement on the 8800/640..but dats a guess.
Last edited by adamsleath; 11-01-2007 at 08:00 PM.
i7 3610QM 1.2-3.2GHz
here's my little tests so far (i'm not done testing the limits yet.. just getting bored of watching 3dmark06 for now lol). Sometimes scores go up, sometimes they go down when increasing clocks... kinda odd
next time i play 3dmark06, i'll find the peak score for each clock individually(core/shader/mem), while leaving the others stock...then try all 3 of those peaks together.
Code:8800GT 760/1776/1000 (CPU/sdr/mem) 3DMark Score 14331 3DMarks SM 2.0 Score 6072 Marks SM 3.0 Score 5687 Marks CPU Score 5019 Marks 8800GT 750/1776/1000 (CPU/sdr/mem) 3DMark Score 14274 3DMarks SM 2.0 Score 6061 Marks SM 3.0 Score 5672 Marks CPU Score 4956 Marks 8800GT 740/1776/1000 (CPU/sdr/mem) 3DMark Score 14047 3DMarks SM 2.0 Score 5810 Marks SM 3.0 Score 5664 Marks CPU Score 5030 Marks 8800GT 730/1776/1000 (CPU/sdr/mem) 3DMark Score 13947 3DMarks SM 2.0 Score 5792 Marks SM 3.0 Score 5626 Marks CPU Score 4941 Marks 8800GT 730/1714/1000 (CPU/sdr/mem) 3DMark Score 13931 3DMarks SM 2.0 Score 5759 Marks SM 3.0 Score 5604 Marks CPU Score 5024 Marks 8800GT 720/1714/1000 (CPU/sdr/mem) 3DMark Score 14078 3DMarks SM 2.0 Score 5986 Marks SM 3.0 Score 5555 Marks CPU Score 4954 Marks 8800GT 710/1714/1000 (CPU/sdr/mem) 3DMark Score 13798 3DMarks SM 2.0 Score 5720 Marks SM 3.0 Score 5572 Marks CPU Score 4895 Marks 8800GT 701/1714/1000 (CPU/sdr/mem) 3DMark Score 13775 3DMarks SM 2.0 Score 5725 Marks SM 3.0 Score 5522 Marks CPU Score 4945 Marks 8800GT 701/1706/1000 (CPU/sdr/mem) 3DMark Score 13777 3DMarks SM 2.0 Score 5722 Marks SM 3.0 Score 5537 Marks CPU Score 4922 Marks 8800GT 701/1706/1000 (CPU/sdr/mem) 3DMark Score 13725 3DMarks SM 2.0 Score 5693 Marks SM 3.0 Score 5493 Marks CPU Score 4971 Marks 8800GT 701/1706/950 (CPU/sdr/mem) 3DMark Score 13529 3DMarks SM 2.0 Score 5636 Marks SM 3.0 Score 5412 Marks CPU Score 4851 Marks 8800GT 701/1625/950 (CPU/sdr/mem) 3DMark Score 13547 3DMarks SM 2.0 Score 5721 Marks SM 3.0 Score 5343 Marks CPU Score 4856 Marks 8800GT 650/1625/950 (CPU/sdr/mem) 3DMark Score 13221 3DMarks SM 2.0 Score 5501 Marks SM 3.0 Score 5204 Marks CPU Score 4954 Marks
Last edited by Diverge; 11-01-2007 at 08:14 PM.
Desktop
[Asus Rampage III Gene] [i7 920 D0] [12GB OCZ3B2000C9LV6GK] [HIS HD 5970] [SeaSonic X750 Gold ] [Windows 7 (64bit)] [OCZ Vertex 30GB x3 Raid0] [Koolance CPU 360] [XSPC Razer 5970] [TFC 360 rad, D5 w/ Koolance RP-450X2]
HTPC
[Origen AE S10V] [MSI H57M-ED65] [ i5-661 w/ Scythe Big Shuriken] [Kingston HyperX LoVo 4GB ] [ SeaSonic X650 Gold ] [ OCZ Vertex 30GB SSD ] [ SAMSUNG Spinpoint 640GB 7200 RPM 2.5"][Panasonic UJ-225 Blu-ray Slot Burner] [ Ceton InfiniTV4]
Well this is kind of promising...
Stock voltage, swiftech MCW-60, Evga SSC.
Just got the cooling installed, gotta go to work early so any more testing has to wait until tomorrow night.
Not so bad, and coool too.
Oh my... niiiiiiicccccceeeeee!!(insert 200 more exclamation points here)
Can't wait to see... I can only imagine where these cards will go with voltmods soon... I'm going to clock mine with extra cooling first, then I'm probably doing the mod myself .
These cards clock so well already without the mods it seems, it makes me wonder if they have little hedgehogs inside of them like !
what's that GPU stability tester I keep seeing that looks like fur?
Last edited by iadstudio; 11-01-2007 at 09:29 PM.
Bookmarks