Guys 9-12 and later bios files are very beta, if you do not have a spare pre flashed chip Oskar advises you do not flash at this time.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
haha, I already flashed Mine.. and now I'm posting here!
got nowhere with it though..
Intel Q6600 G0 2.4GHz L726A
DFI LP UT P35-T2R
2x1GB Team Xtreem 1066MHz Cas5 rated at 2.3V to 2.4V
BFG 8800 Ultra OC
Silverstone Decathlon DA650 PSU
Coolermaster 830 Evo case
1x160GB Seagate Barracuda 7200RPM SATA drive
Samsung DVD writer with lightscribe and SATA interface
Logitech G15 keyboard and G5 mouse
HP w2207 22" LCD
just flashed it back to 8/23..
Intel Q6600 G0 2.4GHz L726A
DFI LP UT P35-T2R
2x1GB Team Xtreem 1066MHz Cas5 rated at 2.3V to 2.4V
BFG 8800 Ultra OC
Silverstone Decathlon DA650 PSU
Coolermaster 830 Evo case
1x160GB Seagate Barracuda 7200RPM SATA drive
Samsung DVD writer with lightscribe and SATA interface
Logitech G15 keyboard and G5 mouse
HP w2207 22" LCD
I finaly got this board and i m testing E6850 on it
6850 L720A Watercooled (~20° water)
Max FSB in coef 6 (max vNB,VTT,VPLL )
http://valid.x86-secret.com/show_oc.php?id=241769
Screen @ 500*9 (not the max) :powerdawa:
http://valid.x86-secret.com/show_oc.php?id=241777
More test under cascade and ln2 later
vcore->1.6v
cpu vid special add->107%
vNB->1.5v
VTT->1.6v
VPLL->1.75v
Vdimm->2.23v
vcore->1.48v
cpu vid special add->auto
vNB->1.74v
VTT->1.6v
VPLL->1.95v
Vdimm->2.07v
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
Quick question, with how close the PCI-E 16x is to the NB... is there a problem with reverse mounted HR-03's?
That sort of mounting? Was just wondering as this board has recently caught my attention. Thanks
EDIT: From my views of it, I am going to say it is very likely that this will not work
Hi All,
New to the forum, but have been reading your good works for a while now
I picked this board up a few weeks back and have been tinkering with the bios settings trying to get a decent overclock with an E6600 B2 and a Q6600 B3. I am still messing around with the Quad but I am waiting to get a new liquid cooling kit, as the Q6600 gets quite warm.
This is what I have for the E6600.
I was wondering about real world performance, would there be any difference between the 533 mhz 1:1 ratio and the 5:6 ratio at 640 mhz as they are quite close with super pi ?
Thanks for any input.....Ron
Last edited by Ron5382; 09-13-2007 at 03:22 PM.
DFI LP UT P35-T2R - Bios 8/23
CPU - C2D E6600 B2
2x1GB Crucial Ballistix PC2-8500
BFG GeForce 8800 GTS 640 MB
Maxtor Sata Drive 200GB
Corsair 620 Watt PSU
Monitor - Samsung 225BW
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
Sorry for the double post
Freak accident.
Last edited by Ron5382; 09-13-2007 at 03:26 PM. Reason: Sorry, dont know why it double posted..Ron
DFI LP UT P35-T2R - Bios 8/23
CPU - C2D E6600 B2
2x1GB Crucial Ballistix PC2-8500
BFG GeForce 8800 GTS 640 MB
Maxtor Sata Drive 200GB
Corsair 620 Watt PSU
Monitor - Samsung 225BW
@ PcCI2iminal
Thanks a ton for that
Here is 9/13 BIOS testing. I didn't compare with 8/23 bios, but I am sure it worked perfect on dual core and quad core.
Dual Core FSB 550 BIOS Options
Quad Core FSB 450 Testing
If you want this beta 09/13 BIOS, pm me your email address. I would be sent to you quickly.
Andre
Here is from Oskar's 9/13 New Bios option FSB 500/DDR2 1200 CL4.
It would have 200~300 Read MB/s and PI is faster about 5 sec on 32M.
Last edited by AndreYang; 09-14-2007 at 05:58 AM.
Does anybody who owns this motherboard know if you can adjust fan's speed in bios to go below 1000rpm. I noticed that there is fan control for this board but does it allow fans to go below 900rmp with low cpu temps.
Looking forward to trying that bios Andre you have pm...
@ AndreYang
i've checked my email and thx for your quick response
btw here is my result with 8/10 BIOS
http://valid.x86-secret.com/show_oc.php?id=242138
cooling LN2
WR database :
http://www.ripping.org/database.php?cpuid=572
this board is
Last edited by wedfighter; 09-13-2007 at 11:35 PM.
Before I got this board, I thought the Transpiper is a waste of money and would not be all that effective.... After seeing how putting a small fan on the PWM HS helped both the PWM and NB temp, maybe this thing will actually work and is more than just the gimmick I think it is.... I got curious and did some test to see how effective the transpiper really is....
Since were testing the nb and pwm temps, I figure Ill bump up the vcore, nb, sb and vtt voltages and run orthos for a bit....
test voltages..
Vcore 1.55v ( .03v droop with anti-droop enabled )
vtt 1.6
vmch 1.9
vsb 1.95
First I ran the board without the Transpiper, I put a lil fan on the pwm hs and thats it.... I dont even know where I got this fan from, its quiet but doesnt push alot of cfm...
Now with transpiper with a 90mm 53cfm fan... I positioned the TP so the air from the fan doesnt affect any other part of the board.. excuse the mess lol...
The TP did lower the temps but only by a lil bit...
Now I positioned the TP the way I think it will be the most effective cos the fan is also blowing at the nb...
Now the difference in temps is alot better, but this is also in a way not a good comparison cos the nb is also getting some airflow...
So what do I think of the Transpiper? after doing this test I still believe its a waste of $$... It could be more effective in a cased computer but in my application its not worth whatever $$ it added to my cost.... My test wasnt that comprehensive cos I only tested in one setting, also the voltage I used were not what most users will use 24/7 so again it could be more effective than I think...
On the other hand, I think the board kicks ass... only had a couple of litres of ln2 to play with but thats all I needed to beat my best oc... ( had IP35p before )... cant wait to see what shes got with more time to play.....
Andrew with 9/13 bios how high can you clock with 5:8 divider ?
---
@all,
is it now safe to use this 9/13 beta bios?.. TIA..
Intel Q6600 G0 2.4GHz L726A
DFI LP UT P35-T2R
2x1GB Team Xtreem 1066MHz Cas5 rated at 2.3V to 2.4V
BFG 8800 Ultra OC
Silverstone Decathlon DA650 PSU
Coolermaster 830 Evo case
1x160GB Seagate Barracuda 7200RPM SATA drive
Samsung DVD writer with lightscribe and SATA interface
Logitech G15 keyboard and G5 mouse
HP w2207 22" LCD
hooray my board arrived yesterday... tested it today a little bit. i have to say its hell of a lot more better than my previous board ( asus p5k deluxe )
heres a screenie of the highest fsb i was able to conjure up hardly with out any kind of tweaking.
more tweaking. and im sure that i can take it much higher
Last edited by Solarfall; 09-14-2007 at 06:22 AM.
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
I just got my stuff setup yesterday. I am really wanting to try this new bios but I already had a C1 post problem that took a little while to get sorted. I dread seeing that after others have talked about a dead board with that exact posting issue.
Silverstone Temjin TJ-09BW w/ Silverstone DA750
Asus P8P67
2600K w/ Thermalright Venomous X Black w/ Sanyo Denki San Ace 109R1212H1011
8GB G.Skill DDR-1600 7-8-7-24
Gigabyte GTX 460 1G
Modded Creative X-Fi Fatal1ty w/ Klipsch Promedia 2.1
1 X 120GB OCZ Vertex
1 X 300GB WD Velociraptor HLFS
1 X Hitachi 7K1000 1TB
Pioneer DVR-216L DVD-RW
Windows 7 Ultimate 64
Intel Core 2 Quad G0 L725020
cooled by D-Tek FuZion, MCP655, Dual Black Ice
DFI Lanparty P35 T2R
2Gb OCZ PC2 8500 SLI
BFG OC 7800 GTX 512 Mb
2x74Gb WD Raptors,2x 500Gb WD SATA2
Enermax EG701AX-VE(W)SFMA,600w
Dont know if anyone else is experienceing this problem, but ive just finished setting up my board, and opened up CPU-z to have a look around, im using the middle PCI-e x16 slot for my GFX card and ive noticed my card was only running x1 capable of x16 so I went to the bios noticed it was set to 1x 1x so I cahnged it to x4 N/C, now it says its running in x4 capable of x16, WTF is going on, how the hell do I get my card to run at x16.
Im using the latest bios from the DFI site, any help on this would be good as I cant live with x4, otherwise everything else is perfect.
Oh and I also got the C1 error code when I first set up this board, the way I got around it was to post on 1 stick, enter the bios and bump up the memory voltage a touch, this board under volts mem just a little, then restarted and put all 4 sticks in, worked fine after that, 4 x 1gb Crucial Ballistix 667mhz.
Last edited by Seanie's Show; 09-14-2007 at 05:11 PM.
Intel Core i7 920 2.66ghz @ 4.3ghz HT Enabled, core @ 1.34v, VTT @ 1.28v, NB @ 1.30v (212 x 21) Batch No: 3910A369
6gb (3x2gb) G.Skill RipJawsX DDR3 17000C9 2133MHz @ 1640mhz 8-8-8-24-1T
Gigabyte G1.Sniper Rev 1.0 @ 205fsb Beta Bios
1 x OCZ Agility 3 120gb SSD, AHCI
1 x Western Digital 500gb SATAIII 16mb Cache HDD, AHCI
Sony DVD +/- R/RW/RAM x22 Dual Layer, AHCI
2 x Saphire ATI Radeon R9 270 2gb (Crossfire)
Gigabyte Odin 850w Modular PSU (Software Controlled)
EK Supreme HF Copper LGA1366, Laing D5 Pump, 2 x 240mm Radiator & 120mm Radiator
Cooler Master HAF XB LAN Box
Windows Se7en Pro x64 bit.
DFI LANPARTY UT P35-T2R - 3/17 bios
Intel C2D E8400@4 ghz (8x500) Watercooled
2x1G OCZ VX2 pc8000@1000 4-4-4-10 2.3v
BFG 8800GTX @ 650/2100
SB Audigy 2zs
Enermax Infiniti PSU (650 watt)
NEC DVD R
150G WD Raptor
Dell 2407 WFP LCD
Lian li PC V1000 case
Win XP-SP2
------------------------------------------------
I'm sick of quotes and sigs, and I'm sick of you !
Hi yes it is the card in my sig a BFG 8800GTS, had it for a while now, I did at one point used to get this issue on an ASUS board I think it was the P5B deluxe, but that as far as I can remeber was an ASUS problem, and a quick restart used to fix that.
Do you think the extra if I plug in the extra floppy connector to the top of the PCI-e slot that would help ?
Intel Core i7 920 2.66ghz @ 4.3ghz HT Enabled, core @ 1.34v, VTT @ 1.28v, NB @ 1.30v (212 x 21) Batch No: 3910A369
6gb (3x2gb) G.Skill RipJawsX DDR3 17000C9 2133MHz @ 1640mhz 8-8-8-24-1T
Gigabyte G1.Sniper Rev 1.0 @ 205fsb Beta Bios
1 x OCZ Agility 3 120gb SSD, AHCI
1 x Western Digital 500gb SATAIII 16mb Cache HDD, AHCI
Sony DVD +/- R/RW/RAM x22 Dual Layer, AHCI
2 x Saphire ATI Radeon R9 270 2gb (Crossfire)
Gigabyte Odin 850w Modular PSU (Software Controlled)
EK Supreme HF Copper LGA1366, Laing D5 Pump, 2 x 240mm Radiator & 120mm Radiator
Cooler Master HAF XB LAN Box
Windows Se7en Pro x64 bit.
Bookmarks