Post your X2 revision F3 OC and stepping

[LIKMARK]

mAJORD's feats inspired me so I thought I could try to get some more juice out of my own cpu.

Vcore 1,65










http://valid.x86-secret.com/show_oc.php?id=231977

As my board don't allow other multipliers than 15(!!) anymore, I didn't try any benchmarks, but it was superpi stable at 3650Mhz, but with crappy dimmtimings I don't even bother uploadin them

[msimax]

the lengths we would go

nice overclock

[Mad_Man]

ADO 5200 IAA6CZ
CCB8F 0721 TPMW

this chip acts strange...

at 1.39Vcore its orthos stable up to 3172mhz
it boots and benchs at 1.39V up to 3400mhz but its not stable there.
highest i tried was 3400@1.52Vcore and second core failed almost instantly. dunno what to do.
temps are under 51C on both cores.

[Console]

Can we see some Clock for clocks vs your intel ?

[lopri]

Sadly, these X2's only can match with Intel's E2140/2160 family. I have an Opteron 165 on DFI NF4 SLI-DR and they're just about equal. (note that Opterons have 2x1MB L2) But still great bang for the buck (especially counting mobo cost), for sure.

[Psycho_eddie]

Likmark well done with that leafblower... what were your temps before and after with it?

Really pissing me off having to wait for my New graphics card to arrive, i should be hoping for at least 3650mhz on mine when i get it up and running

[LIKMARK]

Likmark well done with that leafblower... what were your temps before and after with it?

Really pissing me off having to wait for my New graphics card to arrive, i should be hoping for at least 3650mhz on mine when i get it up and running

Actually it's the pump to my children's jumping castle(or what it's called)
It works great! My temps at 3405MHz 1,5v is 56 degrees celcius, but with the pump at 3600MHz 1,65v it is 42 degrees celcius. (load)

[mAJORD]

That is brilliant LIKMARK, it's not so much the blower itself (as funny as it is) but the you've tapped to the end of it that does it for me

but hey it works, Nice clocks indeed

[Neverine]

Hi , do you have some info about X2 4000 with stepping CAAUG ?
10x in advance

[m411b]

mAJORD
What kind of Spi does that 6400 do stock?
I have my 6000 @ 3200Ghz w/1.44 vcore, which is .04 over stock VID which is proly more then it needs but the board does vcore wrong. It's set in BIOS to 1.4 vcore..
My Spi time is:

I just want to see what kind of difference there is so I know if there is a real benefit to purchasing a 6400 or not..

[Mad_Man]

wtf?? your speedfan is reading both cores??

btw, im getting 26.7s @3172@1.39V with all stuff running at background under Vista32

[m411b]

wtf?? your speedfan is reading both cores??

btw, im getting 26.7s @3172@1.39V with all stuff running at background under Vista32

Which chip is running those times?
I'm running XP Pro without tweaks. Vista 32 and 64 gave me better scores too. But XP is lightspeed years faster then Vista so I went back.

[mAJORD]

M411b, i'll have to fire it up on the weekend again and check, sorry.

It's not gonna be any different though, 214x15 vs 200x16, same diff. Only reason to buy one is extra Headroom and multi to ease the coldbug, but my chip's no better than half the good CCB8F F3's on here when it comes to stable air/water Overclocks, and barely any better than my own 6000+

[Mad_Man]

Which chip is running those times?
I'm running XP Pro without tweaks. Vista 32 and 64 gave me better scores too. But XP is lightspeed years faster then Vista so I went back.

5200+ EE
dunno about vista 2 xp comparison, but i really dont see much slow scores.
it runs it 26.7s without any tweaks or so, with ~67 processes in background.

[Winterwind]

My max validation with inbox and 1.575v
http://valid.x86-secret.com/show_oc.php?id=233701

[mAJORD]

My Ballistix Arrived!!



I was a bee's away from a 22.x pi, but pushed a little hard (3.7ghz) BSOD'd and couldn't quite get there again / couldn't be arsed juggling temps.

Very on the limit OC at any temp or voltage which leads me to belive the mem controller is pretty stressed out @ 600

Anyone got tips on making it play nicer @ high memclock? I've never had ram decent enough to push into this territory before A new exciting world of screwing with timings for hours.

[LIKMARK]

Nice spi!! What volts are you running them at? 2gb or 4? You can lower your tras and trc at least by half.

[mAJORD]

Hi LIX, they're @ 2.3v PC8500 5-5-5-18 stk.

I have no doubt the ram will clock higher as it's prefectly memtest stable up to 604, after tht I get HTT 'no boot' issues, on this board at least. How far the mem controller goes I don't know.

I might tighten the timigns next as you suggest. Maybe it will remain stable @ tighter timings + lower clocks..


Anyway it's promising. Need to find the perfect balance and I hope someone out there at least will be able to break the current AMD 1m record with an X2 before phenom comes along,Just a matter of the right chip, good ram, someone with a chiller and 3.9 or so Ghz I predict.

couple of good possibilties
~300x14 /7 and loose timings

~250x16 /8 and tight timings..


-edit.

OK, clock speed wins. Seems the ram/mem controller was a definate bugbear @ 600.

Yes The cpu-z Vcore is Actual.

[informal]

Amazing clock and results mAJORD!

[Lightman]

Very good result mAJORD!

If only I could find CCB8F somewhere in UK then I would try to match your SPI time ....

But on the brighter side I can have better luck with Phenom.... I will try to nick one ASAP!

[TiTON]

Hey Folks.. i got the 6400 in the house.. did some runs..

Of course.. the first thing you do is kick the volts and see how fast you can get the Suicide Screen Shot.

This was done w/ roughly 1.6 ~ 1.65 forgot what it was actually.

But not bad results


http://valid.x86-secret.com/show_oc.php?id=234099

I will see if I can push it higher and faster

SAD aka TiTON

[Jass]

Haha that's pretty crazy. I wish to see somebody do DICE/LN2 with those. That's where the real competition will begin. I will try to get a container for my X2 5600+ for some DICE action, but for now, my X2 5600+ can bench @ 3.4Ghz on AIR 1.55v. I will get it validated, but I did have some pictures which are pretty hard to see.

[pslee]

wow. very impresssive.

[Lightman]

Hey Folks.. i got the 6400 in the house.. did some runs..

Of course.. the first thing you do is kick the volts and see how fast you can get the Suicide Screen Shot.

This was done w/ roughly 1.6 ~ 1.65 forgot what it was actually.

But not bad results


http://valid.x86-secret.com/show_oc.php?id=234099

I will see if I can push it higher and faster

SAD aka TiTON

WOW

Usual questions:
- stepping codes
- cooling for CPU
- memory
- motherboard
- if possible, picture of CPU itself

Keep pushing...

[mAJORD]

woohoo another 4+gig validation.

Care for some friendly competition SuaSadu. hehe

am too interested in what cooling you have @ your disposal