Q6600 Overclocking Database.

**Koekerwauz_NL** · 07-11-2007, 01:32 PM

In the Netherlands the G0 steppings wil be aviable half/end of august.

A local retailer told me this intel.

I guess we need to wait some longer

**Moe_Szyslak** · 07-11-2007, 01:35 PM

Originally Posted by Koekerwauz_NL

In the Netherlands the G0 steppings wil be aviable half/end of august.

A local retailer told me this intel.

I guess we need to wait some longer

I can't wait that long. This heap of junk is almost dead. I'm buying it as soon as the price drops in less than 2 weeks. I already bought my memory because prices are expected to rise again.

**Koekerwauz_NL** · 07-11-2007, 01:44 PM

I think 3,2 is possible with the B3 steppings.
I hope you don't have to put the voltages up so high but it's deppending on what you get.

**Moe_Szyslak** · 07-11-2007, 01:50 PM

Originally Posted by Koekerwauz_NL

I think 3,2 is possible with the B3 steppings.
I hope you don't have to put the voltages up so high but it's deppending on what you get.

You could go higher but I don't think that wise on aircooling. I want to go for 8 x 400 to get a 1:1 ratio with my memory.

**crossg** · 07-11-2007, 02:34 PM

Originally Posted by Koekerwauz_NL

I think 3,2 is possible with the B3 steppings.
I hope you don't have to put the voltages up so high but it's deppending on what you get.

If you have the right Mobo 3.2 is very easy to achieve on air and keep the temps reasonable. 3528 Mhz ,1 week stable contininuous Folding @ Home and temps never exceeded 60 deg c. Ambient temp was 22 deg c. As soon as ambient temp increases I have to back off the OC to keep below 60 deg. I have booted @ 3730 and ran Super PI and a few other apps but an Idle temp of 45 deg is probably going to top out at 75 deg+ and that's too high for me. I have had no troubles clocking the B3 stepping chip so far with my current board. I am sure it will go higher but with my cooling it would just be frustrating to know I can't use it.

CPU and Heat sink are lapped BTW.

**andyaycw** · 07-11-2007, 05:58 PM

Was this 1.65v Setpoint or Actual voltage?

Originally Posted by Pt1t

Q6600 G0 ES under Watercooling (~20° water)

Gigabyte P35 DQ6 Bios F5H

Max FSB

http://valid.x86-secret.com/show_oc?id=216554

Max Screen (1.65v)

http://valid.x86-secret.com/show_oc?id=216549

**Pt1t** · 07-11-2007, 10:59 PM

Originally Posted by andyaycw

Was this 1.65v Setpoint or Actual voltage?

voltage for maxscreen

**michaLcoughliN** · 07-12-2007, 12:09 AM

i dont believe 4.3ghz IMO and.. 3.7?? are u

tin me? thats friggin sweet.
If they are crunching numbers like this. I change my mind , I wanta quad.

More results with G0 steppings please POST!!

if they are hittin 3.5+ghz my g0d. be stupid not to buy one.

**Pt1t** · 07-12-2007, 01:10 AM

Not the WR because of the FSB wall ...

But still

http://valid.x86-secret.com/show_oc?id=216633

**michaLcoughliN** · 07-12-2007, 01:11 AM

orthos stable?

**Goofisch** · 07-12-2007, 03:04 AM

lol. I think 4.7ghz is not orthos stable

But still. A very very nice clock!

Did you run Super-Pi ?

**boblemagnifique** · 07-12-2007, 06:19 AM

OCCT stable on Water 26/30° liquid (at 3.6ghz) & 20/23° liquid (at 3.8ghz)

The Preview with P35-DS3R = http://www.ixtremtek.com/forums/showthread.php?t=116

**Pt1t** · 07-12-2007, 07:00 AM

http://www.overclocking-masters.com/...ages,t6143.htm

NEW Q6600 WR

**GAR** · 07-12-2007, 08:18 AM

Originally Posted by Pt1t

http://www.overclocking-masters.com/...ages,t6143.htm

NEW Q6600 WR

Nice!!!!

**michaLcoughliN** · 07-12-2007, 09:02 AM

must see more people doing so.. If its hitting 3.5+ this pwns E6850 by far

**boblemagnifique** · 07-12-2007, 09:44 AM

Originally Posted by Pt1t

http://www.overclocking-masters.com/...ages,t6143.htm

NEW Q6600 WR

Great but 1 Core

My Q6600 on waterchiller R507 @ -33° liquid (Maybe WR ?

)

http://valid.x86-secret.com/show_oc?id=216786

http://valid.x86-secret.com/show_oc?id=216787

And

**michaLcoughliN** · 07-12-2007, 10:17 AM

4.2??? :o

**jeffyjaixx** · 07-12-2007, 06:53 PM

Do retail chips that are non G0 have any problem running 370*9?

I want at least 3.33 ghz. And what vcore and temp am I looking at here to achieve this speed?

**The Nemesis** · 07-12-2007, 08:28 PM

Originally Posted by jeffyjaixx

Do retail chips that are non G0 have any problem running 370*9?

I want at least 3.33 ghz. And what vcore and temp am I looking at here to achieve this speed?

That's gonna depend alot on cooling. I had no trouble getting 3303 Mhz 12 hours prime/orthos stable with 1.4v set in bios, 1.36v @ load. It easily does benches @ 3.6Ghz with 1.47v set in bios 1.42v @ load but is not prime stable due to heat.

**luihed** · 07-12-2007, 08:55 PM

Guys, dont be misled by pt1t and boblemagnifique's figures cos these guys make everything they touch fly

....

**jeffyjaixx** · 07-12-2007, 09:08 PM

Originally Posted by The Nemesis

That's gonna depend alot on cooling. I had no trouble getting 3303 Mhz 12 hours prime/orthos stable with 1.4v set in bios, 1.36v @ load. It easily does benches @ 3.6Ghz with 1.47v set in bios 1.42v @ load but is not prime stable due to heat.

What cooling system did you use and what were the temps under load?

**The Nemesis** · 07-12-2007, 09:41 PM

Originally Posted by jeffyjaixx

What cooling system did you use and what were the temps under load?

Check "test station" in my sig

**aster** · 07-13-2007, 07:38 AM

Hi guys, little contribution

Q6600 ES G0 L712A835
OCCT stable @3700@1.47V WCed Temps=43°/65°
Abit QuadGT, P965 WCed

Hoping for 3.9 too

**Brother Esau** · 07-13-2007, 07:52 AM

I would have went for the E6850 if it was topping out around 4.6GHZ and I could get 4.2GHZ 24/7 stable

**GAR** · 07-13-2007, 10:18 AM

man i need a G0 stepping, maybe ebay mine and get a G0 stepping.

Thread: Q6600 Overclocking Database.

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions