And I suppose there was a little ln2 in the pot, lets say 0.5-1cm of ln2 on the bottom of the pot.Originally Posted by luihed
And I suppose there was a little ln2 in the pot, lets say 0.5-1cm of ln2 on the bottom of the pot.
Born to overclock
yeah.... Its alot different than I though cos to reach say -120c, I had to fill the pot maybe 5-6 times or maybe more from the start.... then when I reached that temperature, even if there was no ln2 in the pot the temperature stayed there and I just splash a lil to maintain it.... With all the smoke I cant really tell how much ln2 is there but I think my pot is very slow..... I was trying to be in a 5c range but i was more in the 10c range cos sometimes i pour too much and the temp will go down too much..... I was only practising so I wasnt near my coldbug, I got as cold as -140c and still my e6600 was running..... for pactice I try to stay between -115c to -120c.....
I am also thinking that I made an error in my pot design, The bottom is 48cm wide and even though I drilled a hole thats deep for the probe, it might still be too far from the core to read accurately....
Sorry for the OT guys..
Nice job Luihed, wish I didn't have to sell my e6600 before getting a dewar. My last dry ice run was the same way, first run was the best and after that nothing but problems. Didn't get any tweaking at all, just one run to see if it was stable and after that it was a no go.
@luihed, congratulations on your 9.xx run. You seem to have taken to this 32m very well. Nice work.
@Gautam, I tried but results were poor. My board started acting up. I thought it may be condensation on NB but everything is coated well and was safe in that respect. At least it is starting to get back. (I can boot up to win and do 32m @ default) Still trouble with getting volts up. I'm not sure what happened but it was kind of severe.
@druchii, I'm sure you would like to try to get a better run to post. So much information here to use. I'm confident with some more effort you will do better.
Last edited by coop; 07-06-2007 at 10:21 PM.
8 hrs Prime @ 4500 (9x500) DDR-1200
9.59 32m Pi @ 4810 (8.5x566)
9.59 32m Pi @ 4gb DDR 1248
700 Club @ 7 x 585 CPU-Z Val
Prime @ 542 x 7 (4 hrs 1.28v)
32m 5006 (9.48)
OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop
I'll do better, just need to get this rig setup properly. Might dedicate Monday or Tuesday to tweaking the hell out of it, use one of the overnights to see if my Geil can do CAS4 @ 900Mhz. Maybe she can with 2.2v. My CPU is on it's edge though, any more and she falls, sadly (Due to heat, and what i can only guess is a crap power supply) Thanks though
Intel Core 2 Duo E8400(3.69Ghz, 1.28v) | Scythe Ninja Plus Rev. B
2x2Gb Kingston Hyper-X DD2-1066 5-5-5-18 1.85v
Gigabyte EP-35-DS3R F3 Bios.
1x500Gb Seagate Barracuda.
nVidia 8800GT 512Mb
19.xx.xx Entry
E6600 @ 2287mhz
DFI Infinity 965
Team Xtreem 2x512MB PC6400
Sucks to hear. Were you trying to subzero cool your northbridge?
tnx fafs
i'm still hoping to get better score nxt time
giving 2:3 a go on the 965-s
Last edited by hadji_a; 07-08-2007 at 03:56 PM.
Q6600@3,8Ghz, 4850cfx
18.xx.xx Entry
E6600 @ 2405mhz
DFI Infinity 965
Team Xtreem 2x512MB PC6400
Gautam, no, but I use cold water and if I run too long it forms condensation around the NB block. NB chip is painted though and I have fans on it. I think it started during the time I was working on the 12.xx and finally broke down. I checked my rams each as it would only boot with one at first.
Nice run hadji a.
8 hrs Prime @ 4500 (9x500) DDR-1200
9.59 32m Pi @ 4810 (8.5x566)
9.59 32m Pi @ 4gb DDR 1248
700 Club @ 7 x 585 CPU-Z Val
Prime @ 542 x 7 (4 hrs 1.28v)
32m 5006 (9.48)
OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop
17.xx.xx Entry
E6600 @ 2573mhz
DFI Infinity 965
Team Xtreem 4x512MB PC6400
Very nice
Updated. Been busy, got rid of one of my DFI NF4 computers and put my QuadGT out to pasture, it is under a Tuniq Tower now.
Am looking forward to setting up the P5KE.
8 hrs Prime @ 4500 (9x500) DDR-1200
9.59 32m Pi @ 4810 (8.5x566)
9.59 32m Pi @ 4gb DDR 1248
700 Club @ 7 x 585 CPU-Z Val
Prime @ 542 x 7 (4 hrs 1.28v)
32m 5006 (9.48)
OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop
what?!?! your monster QuadGT isn't going to be 'racing' anymore and has been retired to stud? i thought you were going to sell it to me when you were done benchingUpdated. Been busy, got rid of one of my DFI NF4 computers and put my QuadGT out to pasture, it is under a Tuniq Tower now.
Am looking forward to setting up the P5KE.
i'll trade ya my P5B-Dlx (vCORE, vMCH mods & a little bit of sticky stuff around the socket) for it if your interested...LMK.
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
Just some testings.....with the ASUS Blitz Formula...
INTEL PWA FOR EVER
Dr. Who my arss...
.........
running ram at that speed helps a lot
Great work!! Tras-2 is the best in Asus Blitz?Just some testings.....with the ASUS Blitz Formula...hmm,interesting..
"We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna
This is with my Tweaked for Super-Pi HDs.....
PATA HDs Western Digital 80GB.....One HD for the Windows and one HD for the Page File....
Sorry Fredyama my friend....
....and yes......ASUS Blitz Formula IS VERY FAST......
It seems that the "older" cpuz didn't read the right tRAS in the above picture.....It is 2 and not 5 as it says.....
Last edited by hipro5; 07-22-2007 at 10:58 PM.
INTEL PWA FOR EVER
Dr. Who my arss...
.........
You got me.
I'll get my hands on this board soon too for sure.
Last edited by Gautam; 07-23-2007 at 06:28 AM.
Untweaked XP pro sp1. All processes still running.
Posting Permissions
Reply With Quote
Bookmarks