Page 41 of 51 FirstFirst ... 3138394041424344 ... LastLast
Results 1,001 to 1,025 of 1275

Thread: 32m Low Clock Challenge

  1. #1001
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    Getting AW9D going again.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




  2. #1002
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Quote Originally Posted by NewBeetle View Post
    I entry for 13.xxx category again.
    It's a test and training to take WR modPi 32M.

    DEWA DEWA ~
    NewBeetle
    Good training indeed.

    eva looks like the mchbar is getting messed around with in memset for p35. :S

    does the board have fine settings for trfc or is it like p5b where the only options are 42, 35, 30, 25, and 20?

    coop--975X will never die.

  3. #1003
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by Gautam View Post
    Good training indeed.

    eva looks like the mchbar is getting messed around with in memset for p35. :S

    does the board have fine settings for trfc or is it like p5b where the only options are 42, 35, 30, 25, and 20?

    coop--975X will never die.
    Full set of bios screens here http://i4memory.com/showpost.php?p=65409&postcount=1 but yes has settings for TRFC but similar to P5B DX 20, 25, 30, 35, 42. Asus bios is nice enough to list them all on right side panel http://i4memory.com/reviewimages/mot..._bios_021.html
    ---

  4. #1004
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    594
    New entries from Team Serbia:

    11.XX with 2MB cache







    10.XX







    9.XX



    Last edited by Misko; 06-11-2007 at 10:19 AM.
    Born to overclock

  5. #1005
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Great results Misko. I gotta get a 9.xx if I can find time...

  6. #1006
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    594
    Quote Originally Posted by Gautam View Post
    Great results Misko. I gotta get a 9.xx if I can find time...
    And we will try to catch u at 11.XX
    Born to overclock

  7. #1007
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Hehe, it looks like you'll have it once you switch to 4 MB.

    What'd be really sick I bet is 8x 4:5 4-4-4 on P35, that chipset has the potential of crushing every score in this thread easy.

  8. #1008
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    594
    Quote Originally Posted by Gautam View Post
    Hehe, it looks like you'll have it once you switch to 4 MB.
    ram can be little more tighten and 4Mb maybe we will make it real close to u

    Quote Originally Posted by Gautam View Post
    What'd be really sick I bet is 8x 4:5 4-4-4 on P35, that chipset has the potential of crushing every score in this thread easy.
    Do not underestimate the power of 965 1066 strap above 570MHZ 1:1, j/k
    Born to overclock

  9. #1009
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by Misko View Post
    Do not underestimate the power of 965 1066 strap above 570MHZ 1:1, j/k
    hahaha, please don't even joke about going 570FSB on the 1066 strap. you cats are already killing it at only 550~560FSB. congrats on all the incredible work but your making it very discouraging for the rest of us...my QuadGT just can't get up that high to compete with you. again, awesome work with the 965 times
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  10. #1010
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    If you wanna get discouraged why not try my setup for a day. I'm lucky to even do a 32M at 100MHz less than that. Maybe its my CPU, maybe its my board, I just have horrible FSB luck...

    ...but my ram makes up for it.

  11. #1011
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    594
    Quote Originally Posted by 3oh6 View Post
    hahaha, please don't even joke about going 570FSB on the 1066 strap. you cats are already killing it at only 550~560FSB. congrats on all the incredible work but your making it very discouraging for the rest of us...my QuadGT just can't get up that high to compete with you. again, awesome work with the 965 times
    Abit did act the same way in our case, but DFI goes ~30mhz higher on FSB then Abit!!! Also Abit is at same clock little faster then DFI, I suppose it has tighter latencies on NB so it is a little bit faster clock per clock but DFI is better for overclockig. For us if CPU is wall free, we can put 575MHZ on 1066 strap for Spi 32M, and 580MHZ strap 1066 for 1M, suicide shot is at ~590MHZ
    Last edited by Misko; 06-11-2007 at 10:32 AM.
    Born to overclock

  12. #1012
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by Misko View Post
    Abit did act the same way in our case, but DFI goes ~30mhz higher on FSB then Abit!!! Also Abit is at same clock little faster then DFI, I suppose it has tighter latencies on NB so it is a little bit faster clock per clock but DFI is better for overclockig. For us if CPU is wall free, we can put 575MHZ on 1066 strap for Spi 32M, and 580MHZ strap 1066 for 1M, suicide shot is at ~590MHZ
    that is just ridiculas...i might have to grab the DFI then as my Quad may have just sung its last song (my fault entirely). i am torn between the DFI and a P5K variant...i told myself only 1 motherboard a month

    thanx for the information Misko, much appreciated.
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  13. #1013
    Registered User
    Join Date
    Sep 2005
    Location
    Indonesia
    Posts
    16
    I'd like to join...

    14.xx


    15.xx


    18.xx


    19.xx

    Memset 3.3 beta shows my memory freq at 576MHz while it should be at 494MHz
    Last edited by d4ve; 06-12-2007 at 02:22 AM.

  14. #1014
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    @d4ve, welcome to the challenge.
    Last edited by coop; 06-12-2007 at 05:40 PM.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




  15. #1015
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    New PB for 32M at <3600Mhz closing in on sub 13min

    Straight boot from bios @7x510FSB 4:5 637Mhz 5-5-5-9 3-30-3-3-3 at 2.35v
    - Setfsb bumped to 7x513FSB 4:5 641Mhz 5-5-5-9 3-30-3-3-3 at 2.35v




    ---

  16. #1016
    Xtreme Addict
    Join Date
    Jan 2003
    Posts
    1,083
    14.xx entry....

    I think this is my first 27xxx PP .... very slow start but it starts to pick up speed after loop 6 or so....

    E8400 DFI LP P35T2R Ballistix

    8800GTS PCP&C 1.2kw Raptors

    E6600 =5400mhz
    E6700=5680mhz
    QX9650= 6000mhz

  17. #1017
    Registered User
    Join Date
    Feb 2007
    Posts
    62
    E6300 @ 3.5 Ghz (500*7, 1.365V)
    P5B Dlx 1.45V NB droop moded
    1 go crucial ballistix gmh 4-4-4-12
    strap 1333



    On air, scythe infinity

  18. #1018
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    3054........3oh6...............14.59.250.....6x509 .....509mhz.....4-4-4-4.....1/1

    Tied you lads at the top with a 509x6 but slightly faster i couldn't get the extra 9 tenths of a second shaved off to run 508x6.

    E6600 6 x 509 (boot from bios)
    Ultra-120 (CPU Cooling)
    Abit QuadGT (no vmods)
    Noctua NC-U6 (NB cooling)
    Crucial PC8500 2x1GB // Team PC6400 C3 2x1GB
    PCI-E Biostar 7600GS
    Silverstone ST56ZF
    Seagate 80GB 7200.9
    Win2K3 (pretty much my fully tweaked SPi 32M setup)

    Last edited by 3oh6; 06-17-2007 at 10:04 AM.
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  19. #1019
    Registered User
    Join Date
    Apr 2005
    Location
    Benchland
    Posts
    50
    12.59.203 - E6300 @ 3733 MHz, PSB @ 533 MHz, DDR 1066 4-4-4-4, Asus P5B Deluxe WiFi 1.03G on strap 1333.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	12m59s203 - 3734 Mhz 533 x 7.jpg 
Views:	444 
Size:	195.4 KB 
ID:	60676  

  20. #1020
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    4482........3oh6...............10.59.828.....9x498 .....498mhz.....4-4-4-4.....1/1...965

    yeah, i have nothing better to do this weekend but watch F1, 24hr du mans, the US Open, and run some SPi

    this one is a good little improvement for my 10.xx time. i still won't be touching team Serbia without a different board because this QuadGT just won't do 550FSB...no way, no how.

    E6600 9 x 498 (boot from bios)
    Chilly1 SS (CPU Cooling)
    Abit QuadGT (no vmods)
    Noctua NC-U6 (NB cooling)
    Crucial PC8500 2x1GB // Team PC6400 C3 2x1GB
    PCI-E Biostar 7600GS
    Silverstone ST56ZF
    Seagate 80GB 7200.9
    Win2K3 (pretty much my fully tweaked SPi 32M setup)

    click for full size including memset...


    i will be leap frogging past ya Coop in the 15.xx category sometime tonight as well
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  21. #1021
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    3oh6, that is a good improvement. If only I had better cooling. 15.xx is difficult for me thus far. I will see if I can do better but...
    I do have an advanced weapon though, for about a week now, but still in the box.

    Great sub-timings btw.
    Last edited by coop; 06-17-2007 at 04:51 PM.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




  22. #1022
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by coop View Post
    I do have an advanced weapon though, for about a week now, but still in the box.

    Great sub-timings btw.
    uh-oh...which motherboard do you have sitting there begging to be thrashed?
    and about the sub-timings...i am quite impressed that this board runs as tight with 2x1GB as it does 4x1GB. especially considering the Ballistix don't run 4-4-4-x that well...they don't run high frequency anyway, but apparently like tight subs

    2870........3oh6...............15.59.406.....7x410 .....512mhz.....4-4-4-4.....4/5...965

    this will be it from me for a bit...time to get back to testing memory and finding a way to make this QuadGT run higher FSB with 4x1GB.

    E6600 7 x 410 (boot from bios)
    Chilly1 SS (CPU Cooling)
    Abit QuadGT (no vmods)
    Noctua NC-U6 (NB cooling)
    Crucial PC8500 2x1GB // Team PC6400 C3 2x1GB
    PCI-E Biostar 7600GS
    Silverstone ST56ZF
    Seagate 80GB 7200.9
    Win2K3 (pretty much my fully tweaked SPi 32M setup)

    click for full size including memset...
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  23. #1023
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    I noticed you had 4-1Gb. Nice job with that. Thse boards do very well I think. You got me worried earlier so

    (P5K-E)
    Last edited by coop; 06-17-2007 at 10:19 PM.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




  24. #1024
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    594
    Quote Originally Posted by 3oh6 View Post
    i still won't be touching team Serbia without a different board because this QuadGT just won't do 550FSB...no way, no how.
    Maybe u should try to cool down abit NB, we put DI on NB and only then with 1.9V for vMCH 550fsb was possible. Also I did exact comparation between DFI and Abit. At 3.6ghz Abit is faster about 4-5sec!!! First time I did comparation my calculation were wrong and I thought that DFI is similar like Abit but no, Abit is much more faster. So u need 5mhz on fsb less to catch DFI.
    Born to overclock

  25. #1025
    Admin
    Join Date
    Dec 2003
    Location
    Hillsboro, OR
    Posts
    5,225
    Quote Originally Posted by coop View Post
    I noticed you had 4-1Gb. Nice job with that. Thse boards do very well I think. You got me worried earlier so

    (P5K-E)
    Hahaha, it begins. 4:5 with serious FSB is too much for any other chipset when it comes down to it. Finally Intel chipsets are refined and clocking the way they're supposed to be. Which is why I'm holding off on participating further in this thread till I get my hands on one.

    Nice clocking coop, that looks like a lot of fun.

Page 41 of 51 FirstFirst ... 3138394041424344 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •