32m Low Clock Challenge

[over@locker886]

Quick run on DFI 965-S, RAM only 514Mhz 4-4-4


I am trying to get RAM @ 600 now, seems much harder than on p5b dlx

In Abit very hard to hit 600Mhz ram freq. Please test same settings, try maxmem 600!
btw mobos have 1066 strap give the best performance in 1:1.

[coop]

@Vapor, 1066. Thanks, I'm learning about this board. QuadGT. I've been working with some of those OS things and don't have the right combo yet. Way far away from some.

[Gautam]

thank God, at least for couple week we're safe...
why not join us vapor? ... it'll be fun

I'm still watching... Looks like I know what I'll be doing while fighting the jet lag now.

I dunno about this though, that 14.xx was damned hard. My ram is capable of the big speeds, rather the mobo starts binding around 650 it seems. How to pull off a 32M at 660 is just beyond my comprehension. Everything has gotta be in place and oldscarface has definitely got it.

Too bad Gautam didn't send me his rig while he was in India....I still have our good install from our 5.4GHz LN2 run (though I think it wants me to activate by now...hrmmm).

Heh, depending on how things pan out perhaps you can have another go with this stuff.

c.h.r.i.s- the Commando is supposed to have better vdimm regulation than the P5B. I too cannot 32M well at higher than 2.65v or so...have you tried lower vdimms than on the P5B? The vdimm drop/droop should be less on the commando compared to the p5b.

Oh and btw, sub-10 can be done at about 4920-4940MHz with today's hardware if anyone so pleases...I can assure you of that.

[andre X_X]

me too cant run spi @ >2.65v vdimm, between 2.6v and 2.7v it seems too little gain in rams mhz... for me 2.45-2.55v on p5b was the best for ram benching. lowered the NB voltage also helps stability.

coop, tried maxmem 485, 512, or 600. set affinity to Core 1 for spi. and then copy wazza with 2.4gb works perfect. in my P5B boot at Trfc = 35 was faster than 25. one thing, Use XPLite (edit with nlite).

[over@locker886]

I'm still under 15min

[andre X_X]

very nice run.... 1066 strap awsome...
now you're playing secret huh

[Misko]

Your pic is corrupted I see some blue polygon on it , let me guess you start to play with some ram eat software?

[Oldscarface]

He over@locker886,

That score is pretty impressive for those memspeed.
It seems that I have to go benching again.

[over@locker886]

very nice run.... 1066 strap awsome...
now you're playing secret huh

yes

Your pic is corrupted I see some blue polygon on it , let me guess you start to play with some ram eat software?

only videocard problem No, I never used yet.

He over@locker886,

That score is pretty impressive for those memspeed.
It seems that I have to go benching again.

Thx

[luihed]

My run.... Im curious to what the acceptable performance product at around this speed? Sorry im still new at this but comparing my PP to Gautam and Misko's score, Im wayyy off lol..... I understand that both of them are about as good as they get but I just want some opinion on where Im at.... thanks...

[coop]

Thank you for your suggestions.

[andre X_X]

very nice coop
Quad GT 1:1 @ 1066 strap is so powerfull.... i need that board to compete with you guys... stuck with P5B now...

[coop]

After probably 20 tries this is as close as I can get..(over@locker886)

[coop]

[andre X_X]

12.xx Category
im closer
Tried 3590mhz, but got result 13m 0.037s LOL.... 0.037s to 12m , what tweak do i need more? anyone can help? my subtimings already too tight, so i need windows tweak... how much the paging file do you guys set? thx

[coop]

^^ That is a very nice 12.xx

[coop]

I could not let it go. I had to keep trying.

[coop]

One more

[over@locker886]

I could not let it go. I had to keep trying.

Good job

0,3Mhz is not fair

[coop]

4/5 vcore1.520v vdimm 2.447v vmch 1.734v vtt 1.437v

[coop]

Got as close as +.298 with 3276 and those Ballistix 8500's rock.

[fredyama]

maxmem = 600MB = 13min 23s which is ~4 seconds slower heh

yes RAS TO CAS Write delay = 2 memset tweaked no glitch it isn't RAS TO CAS Read delay (tRCD)

　



(Setup)
M/B: ASUS P5B Deluxe WiFi-AP 6CM0AID (Bios 1101, Vnb/Vdimm Clip mod)
M/B Bed: ARC Bed Rev.5.0 PRO
CPU: Core 2 Duo E6600 L632B086(35634076)
CPU Cooling: Air Scythe Infinity + Delta TFB1212GHE x 2
Chipset Water Cooling: Alphacool Xtreme Pro 360mm Kit + NB:Alphacool NexXxoS NBX-A, SB：Alphacool NexXxoS NBX-N
Memory: Team Xtreem TXDD2048M1200HC5DC 1GB x 2
VGA: ATI 3D Rage PCI 8MB
HDD: Maxtor 6L080P0 PATA 80GB
Power Supply: OCZ PowerStream 520W
Vcore: 1.600V(Bios), Vdimm: 2.608V(Actual), Vnb: 1.893(Actual), Vio: 3.472V(Bios)、Others:Max in Bios
OS: Windows Server 2003
MEM: 2:3, @Bios: 4-4-4-4-4-4-25-4-9-4-9
Others: FSB400@boot, SetFsb2.0, MemSet3.2, ERAM2.11, AutoGear, MAXMEM, Copy-Waza

[Viss]

Thats very very impressive Fredyama

[dinos22]

Thats very very impressive Fredyama

indeed it is

[erwinz]

very nice Fredyama..