14m 53.375sec @ <3.3ghz
that's the highest i can go on 1066 strap (unmodded p5d dlx)
14m 53.375sec @ <3.3ghz
that's the highest i can go on 1066 strap (unmodded p5d dlx)
Sounds extremely promising! Looks like you finally found a keeper.Originally Posted by before
Oops sorry to hear broDid you try a long clear CMOS?
On my side I've some pretty good news; I've received a X6800 L624A610 and it loaded Win at 5.2GHz@1.64V DMM (Vcore mod didn't work) under -118C pot temp.
Can't wait to see this chip with 1.8V or 1.9V... Might be a killer one!
Btw, try and do another sub 4 GHz run sometime.
Ok; no problem
Best Regards,
Xavier
"I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.
very nice thread! im in
if this is your first night in xtremesystems,
you have to overclock.
Quite a formidable time there esdee.
Yes, it is.....too bad we've gotten so off topic here that we've forgotten what this thread was originally aboutQuite a formidable time there esdee.I vote that a mod please make this whole "Best Spi 32m @ 3600" a thread of it's own with Gautam leading the discussion (if that's OK with him). Sorry coop for taking up at least 4 or 5 pages of your thread with all this talk
or you can simply chime in at i4memory.com (eva2000's forum) and show you face there in a Thread dedicated to 3.6GHz runsYes, it is.....too bad we've gotten so off topic here that we've forgotten what this thread was originally about
http://www.i4memory.com/showthread.php?t=3017
ROFLYes, it is.....too bad we've gotten so off topic here that we've forgotten what this thread was originally about
And sadly enough, I have yet to post any time myself here. However, if I ever get around to it, it hopefully will both meet the requirements of this thread and be at more or less 3600MHz (preferably less).
dinos, that looks like a fun thread. Hope to take part in it soon.
Here is my CS pc8000 d9gkx, damn missed 13min by less than 7s. I will try harder
This is at 2.58V, reducing trfc, twtr and twtp at these volts instantly crashes
Last edited by kiwi; 03-14-2007 at 10:50 AM.
...
U-14mins
CPU：Core2 Duo E6600 L639F039
CPU Cooling: Intel original Heatsink
M/B：Asus P5B Deluxe WiFi-AP (BIOS 0910) Vcore, Vdroop, Vdimm, Vmch Mods
Memory：SuperTulip PC2-5300 512MBx2
VGA: Jaton 7600GS
HDD: WD IDE 80GB
PSU: Bequiet 600W
OS：Windows XP Pro SP2 (reduced to 150MB of size)
Vcore: 1.31V
Vdimm: 2.55V
I didn't try tightening timings more; but it might be possible.
Last edited by before; 03-16-2007 at 01:03 AM.
Best Regards,
Xavier
"I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.
OMG, thats very good result before.... and your memory is a beast
have you try lowering the trfc to arround 25? it could shave couple seconds.
running spi right after applying and closed the memset could also helps reduce few seconds mainly in the few first loops....
E8600 Q820A750
DFI LanParty UT P35-T2R - Abit IX38 QuadGT - Asus P5B Deluxe - Biostar TP45 HP
Team Xtreem PC-5300 C3 2GB - Crucial 10th Anniversary 2GB - Team Xtreem PC8500 C5 2GB
Winfast 8600GT
Silverstone Olympia 1000w
andre X_X -72c CO2 Cascade
My R22/CO2 Cascade Project
Here is my 3 interesting bench, unfortanetly biostar don't like 4:5 divider
Single channel
Don't make me give up before I even begin.U-14mins
CPU：Core2 Extreme X6800 L624A610
CPU Cooling: Intel original Heatsink
M/B：Asus P5B Deluxe WiFi-AP (BIOS 0910) Vcore, Vdroop, Vdimm, Vmch Mods
Memory：SuperTulip PC2-5300 512MBx2
VGA: Jaton 7600GS
HDD: WD IDE 80GB
PSU: Bequiet 600W
OS：Windows XP Pro SP2 (reduced to 150MB of size)
Vcore: 1.31V
Vdimm: 2.55V
I didn't try tightening timings more; but it might be possible.
LOL who gives up before they tryDon't make me give up before I even begin.
man i really would love that hipro maximizer thingie....too bad it's a little expensive for my taste
It's an absolutely awesome piece of HW....everything looks VERY polished and professional. I received mine yesterday and it seems that it'll save me the trouble of v-modding future boards. The 680i board that I'm using right now may not need the maximizer though...as it currently has no droop in the Vmem whatsoever...in fact, the Vmem actually INCREASES +.001 when the system is loadedLOL who gives up before they try
man i really would love that hipro maximizer thingie....too bad it's a little expensive for my taste
anybody know if the maxi works on commando ? think it should be better..
i saw someone use maxi on commando but they had unsoldered that coil... p5b deluxe worked without unsoldering coil on my board but not sure it i needed the coil unsoldered as i got same clocks without the maxi at 2.45v
but maxi did allow me more vdimm higher clocks past 2.45+ but at the limit as vMCH was unmodded... you need higher vMCH volts than 1.65v for higher ram clocks heh
without maxi @580mhz at 2.45v
with maxi @590mhz at 2.6v - limited by lack of vMCH
Last edited by eva2000; 03-16-2007 at 04:32 AM.
---
i have experienced the exact same thing, no difference in clocks going from Maxi powered @ 2.45v to board powered VDIMM @ 2.45v (or any other voltage TBH). i was thinking that perhaps unsoldering the coil would help so perhaps i will try that soon. if you do try before me, be sure to report back.
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
Sorry Before
CPU：Core2 Duo XE6800
CPU Cooling: Hyper6+
M/B：Asus Commando
Memory： Team 2x1024
VGA: asus 8800GTS
HDD: WD IDE 40GB
PSU: tagan 520W
OS：Windows XP Pro SP2 tweaked
Last edited by esdee; 03-16-2007 at 04:39 PM.
if this is your first night in xtremesystems,
you have to overclock.
esdee yours tRFC is awesome, can you share cooling type of memory and vdimm?
Born to overclock
Very time indeed
I dream of a memory kit like this one; which model is it?
Best Regards,
Xavier
"I prefer to fly alone... when alone, I perform those little coups of audacity which amuse me..." Col. René Fonck (1894-1953), the Ace of Aces.
Well finally got there in the end with a help from a few friends
SUB 12 second run
Who says the Nvidia 680i chipset is slow
Abit IN9 - no vmods and watercooled x6800 - the rest is air cooled. Took some effort but I'm happy with the results
UPDATED!..the scale is moving lower.
8 hrs Prime @ 4500 (9x500) DDR-1200
9.59 32m Pi @ 4810 (8.5x566)
9.59 32m Pi @ 4gb DDR 1248
700 Club @ 7 x 585 CPU-Z Val
Prime @ 542 x 7 (4 hrs 1.28v)
32m 5006 (9.48)
OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop
thank you guys!Very time indeed
I dream of a memory kit like this one; which model is it?
vdimm is 2.6, but i think i can lower it!
cooling type is as always DELTA fan 12cm 190cfm or so, ambient temp close to 23-25*C, the mems are still naked without their heatpipe heatspreaders, they even have their s/n stickers on!
mem type is the 1200 5-5-5 (AKA D9GKX), not using the maxi shown in the pic yet, because i can't desolder the coil with my low power soldering iron so i have to wait till hipro is back from cebit!
the whole rig is set up for testing reasons, to max out certain parts of hardware for my upcoming bench session, this X6800 benched @ 5160 32m spi with my weakest cascade @ -88 @ load (1.91Vcore) my bench cascade is about -104 @ the same load
Last edited by esdee; 03-17-2007 at 12:41 PM.
if this is your first night in xtremesystems,
you have to overclock.
Ahhh..a benching cascade and a 24/7 cascade....good idea!...this X6800 benched @ 5160 32m spi with my weakest cascade @ -88 @ load (1.91Vcore) my bench cascade is about -104 @ the same load
Edit: I think you need more fans :p
Posting Permissions
Reply With Quote
Bookmarks