32m Low Clock Challenge

[before]

This thread is on fire!! I love it.
@nicke...yah I stole your girl
@zeus...from my testing ram mhz as a huge effect on time in 32m regardless of main or adv timings. Also booting at a tighter strap helps.
@before...How you like the commando compared to the p5b bro?? I am thinking of getting one.

Both look like equivalent to me... less voltage mods to do for the Commando (Vcore and Vdroop are still required); but nothing really different in term of functionning.

My current main concern is trying to get the best possible compatibility for X6800 and QX6700 on that P965 chipset... I'll try under cascade ASAP with lastest bios' for both boards. It may exists a difference between P5B and Commando on this matter.

[k|ngp|n]

More runs..
14min class:


and 13min class, this one can go lower I think with diff combination of strap/fsb/speed, but still a pretty decent time for the low clocks on both cpu and mem:


How is that commando testing coming before??
Sub zero? About to go back on ln2 finally with p5b.

[dinos22]

KP drop the CPU MHz more and gives us all an even harder time with that sub-14m run

this thread IS on fire

[s7e9h3n]

Thanks for clearing that up before

and thanks dinos for the bios shots with your benchies, removes all doubt now really

Why should there have been any doubt ? Because I said it?

[s7e9h3n]

by the way is it me or did you actually went to the darkside
you comitted a sin my friend

LOL....it's not mine....I'm just doing a favor for a friend.....Plus, my autocascade's lonely....it needs some use after 6 months in hibernation

[massman]

Hmmmm......where can I find this "OPB_Cleane..." proggie?......It seems that it gives a GOOD boost.....

You might want to check out the threads at OCX ...

[corvus_corax]

Another time at 3.6Ghz, the same crappy and corrupted XPSP2 OS , i'm too lazy to format LOL... nah! I have a lot of work to do and now i really don't have no time for benchs
I guess in a new and clean Win2003 installation (for example) will be better .
Booting from BIOS with those settings, nothing special:


@before: Wow!! Amazing times , especially with your E4300 , awesome and fine tweaking work!

[coop]

17.xx

[Zeus]

Coop, you forgot to add my 12.xxx minute result.

[coop]

^^ that's because it was better than mine. It is on now.
@corvus.. your previous score is better.

[k|ngp|n]

I know this doesnt really belong here, but in the spirit of doing great times at lower clocks here was a quick 32m tonight when testing some b2 chips. 1sec better than my previous best with 60 less mhz , about as tweaked as I can get it. Time to just scale it up now:


This board also rips for pifast..running clock for clock or faster than the 975x boys:

[Gautam]

Nice to see some heavy clocks on 965 (again). How about maxmem?

[dinos22]

KP is cheating

his RAM and CPU are too nice

[before]

hey Vince, that some really nice ones bro!

What's the FPO/BATCH of this X6800 of yours?

[hipro5]

Scaling a 965 board with 4:5 or 2:3, you can archive good resaults out of it....

This board also rips for pifast..running clock for clock or faster than the 975x boys:

NOPE......Pi-Fast you could get an "equal" resault out of 975 and 965.....Rams on 975 @ 441MHz Cas 3-3-3-1 (haven't tested it with Rams at 407MHz and Cas 3-2-2-1) and at 965 @ 600MHz.....170MHz difference on rams....

[funkflix]

I know this doesnt really belong here, but in the spirit of doing great times at lower clocks here was a quick 32m tonight when testing some b2 chips. 1sec better than my previous best with 60 less mhz , about as tweaked as I can get it. Time to just scale it up now:
http://www.overclockingpin.com/9min41sec%2032m.jpg

This board also rips for pifast..running clock for clock or faster than the 975x boys:
http://www.overclockingpin.com/1805%20pifast.jpg

Nice results!

One question to you - aren't those 6400C3 Fatbodies?

[coop]

Looks like a 9min catagory is needed. Right behind you in the 14min. k|ngp|n

[dinos22]

how does 13.1s 1M at 3GHz sound with conroe






UNDER LINUX

[coop]

Can you do 32m with that?

[dinos22]

i can but you guys would be ing that it's too quick lol

[dinos22]

interestingly enough it's not that crash hot ~16m 19s

[JMKS]

Allendale 400x8 4:5 "boot from BIOS"



My final effort, nothing to improve IMO (untouched registry as usual but Copy Waza applied this time ). I have no RAM which will fly 580 or so (for 2:3 and beyond 400)... Sorry for no "OPB_Cleane..." visible .
k|ngp|n, another run required .

[k|ngp|n]

Scaling a 965 board with 4:5 or 2:3, you can archive good resaults out of it....



NOPE......Pi-Fast you could get an "equal" resault out of 975 and 965.....Rams on 975 @ 441MHz Cas 3-3-3-1 (haven't tested it with Rams at 407MHz and Cas 3-2-2-1) and at 965 @ 600MHz.....170MHz difference on rams....

Give and take right George ? I am working on 9.3 sconds now in 1m at a little over 5330mhz, not to bad eh?

[k|ngp|n]

so you did the massman tweak then? Installing OS at 5.2ghz

haha yep

[hipro5]

Give and take right George ? I am working on 9.3 sconds now in 1m at a little over 5330mhz, not to bad eh?

NOT bad Vince.......I think that you have persuated me to test my ABIT Quad GT .......