Page 17 of 51 FirstFirst ... 71415161718192027 ... LastLast
Results 401 to 425 of 1275

Thread: 32m Low Clock Challenge

  1. #401
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,421
    I've been working my fingers to the bone lately to get sub 13 minutes.

    Running async finally got me somewhere but the CPU frequency is way too high for my taste.

    I was expecting to hit this mark at around ~3730MHz.

    Looking at k|ngp|n's result my jaw dropped to the floor.

    Here's my attempt at sub 13 min. with my i975 board:



    I will try some more but i think i'm gonna need 3-3-3 for better results.
    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

  2. #402
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    if you had RAM running at 600MHz 4-4-4-x (which is almost impossible on 975x) you could probably be somewhere in 3.6+GHz range....RAM has a lot to do with that run but he has put all those tweaks better than anyone else pretty much.....good on ya Vince you showed us how it gets done
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  3. #403
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Australia
    Posts
    481
    Quote Originally Posted by dinos22
    he has put all those tweaks better than anyone else pretty much.....good on ya Vince you showed us how it gets done
    Yeah, go back to 3DMark would ya k|ngp|n



    Just kidding

    Top stuff, sub 13mins @3.6Ghz is freakin insane

  4. #404
    Quote Originally Posted by SLi_dog
    Yeah, go back to 3DMark would ya k|ngp|n

    Just kidding

    Top stuff, sub 13mins @3.6Ghz is freakin insane
    haha...thx man. I'll go back as soon as I am done testing some b2 chips for the "one". Until then, you guys are stuck with me .

  5. #405
    I am Xtreme
    Join Date
    Feb 2003
    Location
    Netherlands
    Posts
    6,421
    Sub 14 minutes:

    Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB

    Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing

    Case: Murdermodded TJ-07

    sub 9 sec. SPi1M 940BE 955BE 965BE 1090T

  6. #406
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Looks like I've got some learning to do Too bad I killed the mobo after 2 days ......On air ~1.54Vcore IIRC (It was a couple weeks ago).......


  7. #407
    Xtreme Member
    Join Date
    Aug 2006
    Location
    Warsaw, Poland
    Posts
    148
    493x7, Allendale again (hmm... all multipliers used for different "Time Zones", not sure what to do next - sub-13M with x8 will not be that good...)
    13m58.203s
    I really must find some space to do Copy Waza...


  8. #408
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by JMKS
    493x7, Allendale again (hmm... all multipliers used for different "Time Zones", not sure what to do next - sub-13M with x8 will not be that good...)
    13m58.203s
    I really must find some space to do Copy Waza...

    How the hell did you manage that eek
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  9. #409
    Xtreme Member
    Join Date
    Aug 2006
    Location
    Warsaw, Poland
    Posts
    148
    1066 strap as usual, nothing else. Really, OS is not fully optimized (clean registry - don't know how to do it properly..., and w/o Copy Waza).

  10. #410
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by JMKS
    1066 strap as usual, nothing else. Really, OS is not fully optimized (clean registry - don't know how to do it properly..., and w/o Copy Waza).
    your time is REALLY good....almost too good to be true according to your description

    what is that icon on desktop OPB_Cleane...
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  11. #411
    Xtreme Member
    Join Date
    Aug 2006
    Location
    Warsaw, Poland
    Posts
    148
    Quote Originally Posted by dinos22
    OPB_Cleane...
    r.bat, also nothing special, batch cleaning some "Recent documents" links, temp files etc.
    The strap is very powerful, quick tests (by me ) showed that 422x8 @ 1333 is slower in SPi than 400x8 @ 1066.
    I'm not sure how it works on QuadGT, but for me (Commando, NB @ 2,025V) it was impossible (with ambient temp <0&#176;C etc) to reach (on 1066) 510 1M... 505 16M (over 13s better than P5B-Dlx FSB 510 @ 1333) and 508 1M (0.250s better than 514,6 FSB on P5B-Dlx @ 1333) max so far (and spring is coming, so no hope to improve FSB).
    And yes, I know that time is good - I'm trying not to post bad ones . But bachus seems untouchable, 2:3 and 4MB cache is working good.
    Last edited by JMKS; 02-27-2007 at 03:50 PM.

  12. #412
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    i know about the strap performance hence why i say your time is crazy good even at 1066 strap........have you got a 4MB cache CPU you can bench as well with those settings.....it would be interesting to know how you would go.........judging by that time i would say it would be close to KPs time even with slower memory....surely you must have some other tweaks you aren't tell us
    Last edited by dinos22; 02-27-2007 at 08:26 PM.
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  13. #413
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    i did some thinking today (in know how scary )



    @JMKS if you are telling those are your tweaks i honestly don't know how to put this but to say that you are using a cheat of some sort as there is no chance you can do that at normal tweaks........someone (including yourself) please prove me wrong





    Actually i just cannot see how you could beat everyone with "Not so optimised OS" and "no registry tweaks and no copy wazza"......TO BE PERFECTLY clear here i don't think with a perfectly tweaked OS and registry tweaks you could achieve that with those settings
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  14. #414
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    I would like to know how to be able to run that good of a time at that speed as well. I'm working at it and can't come close even with a couple tweaks.
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




  15. #415
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by dinos22
    How the hell did you manage that eek
    dinos not hard to do sub 14min under 3.5ghz



    but for E6400 2MB with 493FSB 1:1 seems a bit weird unless he's got vMCH modded and clockgen'd his way from 400FSB to 493FSB.

    what board JMKS ?
    ---

  16. #416
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by eva2000
    dinos not hard to do sub 14min under 3.5ghz

    but for E6400 2MB with 493FSB 1:1 seems a bit weird unless he's got vMCH modded and clockgen'd his way from 400FSB to 493FSB.

    what board JMKS ?
    YES not hard on E6600 as BA demonstrated doing it sub 3.4GHz

    BUT BAs RAM was very high at tight latency and in 1066 strap

    JMKS is using Commando but i just don't see how it is possible man
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  17. #417
    Dr. / Professor
    Join Date
    Apr 2004
    Location
    Phoenix,USA
    Posts
    760
    ok getting better..
    8 hrs Prime @ 4500 (9x500) DDR-1200
    9.59 32m Pi @ 4810 (8.5x566)
    9.59 32m Pi @ 4gb DDR 1248
    700 Club @ 7 x 585 CPU-Z Val
    Prime @ 542 x 7 (4 hrs 1.28v)
    32m 5006 (9.48)

    OC Formula 3770k-dl G.Skill 2666 C10 Galaxy 660Ti 3gb Apogee HD PlextorM5P xfx p850
    MVF 3770k Team 2600 C10 xfx 7850 2gb xspc RayStorm HyperX 3k Hyper 730
    Gigabyte EP45-UD3P e8500 Crucial 8500 khx9600 evga 9800gtx PCP&C 610 H20 by Coop




  18. #418
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    3390MHz is what you should be aiming for. BA doesn't make it easy does he heheh.........i think Vince has it covered if he decides to give it a crack
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  19. #419
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by eva2000
    but for E6400 2MB with 493FSB 1:1 seems a bit weird unless he's got vMCH modded and clockgen'd his way from 400FSB to 493FSB.
    Ummm, I think you're forgetting that the amount of l2 cache isn't very important in 32m....you'll see the difference most @ 1m

  20. #420
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by s7e9h3n
    Ummm, I think you're forgetting that the amount of l2 cache isn't very important in 32m....you'll see the difference most @ 1m
    you probably haven't done much benching with 4MB and 2MB cache CPUs if you think that
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  21. #421
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by s7e9h3n
    Ummm, I think you're forgetting that the amount of l2 cache isn't very important in 32m....you'll see the difference most @ 1m
    nope HUUUUUUUUGE diff for core2 4MB vs 2MB for 32M
    ---

  22. #422
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by eva2000
    nope HUUUUUUUUGE diff for core2 4MB vs 2MB for 32M
    LOL to put it bluntly
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  23. #423
    k|ngp|n/Sham my brothers
    Join Date
    Aug 2002
    Location
    Athens---Hellas
    Posts
    5,693
    Hmmmm......where can I find this "OPB_Cleane..." proggie?......It seems that it gives a GOOD boost.....
    INTEL PWA FOR EVER

    Dr. Who my arss...

    .........



  24. #424
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by eva2000
    nope HUUUUUUUUGE diff for core2 4MB vs 2MB for 32M
    Oh really? Then please explain the 14.xx results to me...I believe you used a 4mb cpu in that bench as well....

  25. #425
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by hipro5
    Hmmmm......where can I find this "OPB_Cleane..." proggie?......It seems that it gives a GOOD boost.....
    heheheheh
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



Page 17 of 51 FirstFirst ... 71415161718192027 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •