One more for ya.

When I first put this together I could see that there would be a lot of work to get the cable management up to my usual level. I didn't have the time then, so I just did the best I could.

Just a couple examples of my previous work. Sorry no thumbnails on these.




So, here is what I had, with side open and closed.


I ended up cutting a 2" hole in the bottom for everything, 1" at the top for the 8 pin, dremeled out 2 holes for the dvd cable, 1 under the mb, and the other at the the hd cages. Also has to mod the bottom cage for the main drive, and still be able to use the fan there. Sorry I didn't take any pics until this was done. Here is the back with all the wires. Duct tape is my friend. This would be much easier with a modular psu. My powerstream has tons of cables that I don't use.


Now the finished product. Again with side open and closed.


Pretty pleased with the results. I do like this case. With the way the hd cages are set up for fans, I am able to pull in air over the ram, to the cpu, and then pull it out the back. Although, somehow one of my crucial 10th anniv. sticks died. Was working fine when I tore it down, but afterward the one stick will not post I just picked up some g skill hz from another member for a future build. Now I'm using them, so you may notice it in the before and after pics.