there's something strange about bios 0902!

Its not the VCORE Locking, its freely adjustable now (1600FSB). The strange thing i've found is that now in 0902, EVEREST Ultimate 2007 (in the sensor section) reports a much lower CPU Core Voltage compared to Hardware Monitor or Probe II.

Back on 0302, the Vcore was exactly the same on both programs.

Let me give you an example:

Back on 0302 Bios
Vcore set in bios - 1.4125
Hardware monitor in Bios - 1.31
Probe II - 1.31
EVEREST Ultimate - 1.31V

Now on 0902 Bios
Vcore set in bios - 1.3500
Hardware Monitor - 1.33
Probe II - 1.33
EVEREST Ultimate - 1.23<- Hence this is why i can't get my cpu stable, it seems to be actually only getting 1.24V instead of the 1.34..

And on 0902 Bios
Vcore set in bios - 1.4125
Hardware Monitor in bios - 1.39
Probe II - 1.39
EVEREST Ultimate - 1.30V


It seems that on 0902, the Vcore "digits" are upped, but the vcore supplied to the cpu is alot less (a whole 0.1v). That seems to be the problem i'm experiencing.

Also the reported "1.39v" on 0902 is not making my cpu any hotter compared to the 1.31V from 0302..

I'm not sure if i'm making sense.. haha =D