A-Data PC6400 Vitesta EE // D9GCT // Adata Chips? <=what?

[ghosty1234]

lo guys my 1.st post here^^

I just ordered A-Data PC6400 Vitesta Extreme Edition (EPP) 4.0-4-4-12 @ 2.0V Micron D9GCT (B6-37E) for testing.

Does someone have experience with this babies @1:1 devider, based on a 975X Chipset Mainboard?

I do with my G.Skill 6400 HZ&#180;s up to 460 @1:1 @4,4,4,12 with 2,65 Vcore with GMH chips on it. Can i expect the same results? better or worse?, what do you think? Board in the sig.

best regards and thx for replies.





EDIT:

Just got a reply. Maybe i even get the RAM with "Adata" chips??!!! rebadged?
WTF is this?

[starostise]

I have adata vitesta EE 6400 2GB
it s rebadged D9GCT ICs too, same as yours

with P965 i got ~540mhz 4-4-4-12 superpi 1M benchable with 2.4v

[ghosty1234]

Nice, thank u m8t.

[Roger_D25]

So did you get them yet ghosty1234 or are they still on the way? I'm cuious to see how they work for you? Also where did you get them from, any change your from the States? Just curious because I can't find any Adata EE modules anywhere in the US!

[dexx]

To anyone who manages to get these, please post where you bought from.

[xs64]

i have 2x1Gb Adata EE PC6400
Dont know what is the chip inside , it runs @ 400 4-4-3-11 1.9v 24/7
And i bought in Germany

[Roger_D25]

xs64,
Thanks for posting about your Adata RAM, much apprecaited! Since I posted earlier I've been researching, it seems to be quite easy to get them anywhere but in the US, lol!

[ghosty1234]

Good morning Roger D25,

I orderd in Germany here!
They are still on the way. They come Thursday or Friday. Then i report my results here.

btw: I just dont do deviders or something like that. I wanna test with my Board in the signature @1:1.
I&#180;ll try to do at least 467 with 4,4,3,8 @PI 1M. I will see it...
With my HZ&#180;s i do up to 460 @1:1

best regards...

[Benny Lodewijk]

I have tested it...

[Roger_D25]

Benny,
Is there any chance that you have pulled the heatspreader yet on those modules, from your results I would assume their D9's but some of these other IC's have started to do pretty well! So pull those spreaders and let us know ASAP, lol!

[ghosty1234]

Tomorrow my babies will come.
Then i test some 1:1 power on the 975X Chip.

regards

[xs64]

Benny ,
Is your Ram is AD or MI at the label ?
I have AD and cant run over 500

[Benny Lodewijk]

The chip labeled with ADATA. I'm not sure this is Micron, also the memory don't like voltage > 2.3 volt. I think it's elpida or promos or aeneon

[starostise]

i have these:

1. ADATA VITESTA PC6400 CL5 2GB

M2OAD6G3I4170I1E53
ADQVE1A16
10*10mm ICs







and this

2. ADATA VITESTA EE PC6400 CL4 2GB

M2OAD9G3I4170INE58
ADQVD1A16
10*10.5mm ICs





1. Is not micron ICs but rebadged
2. Is D9 rebadged


so its too differents ICs regadged by adata with the same name. but for D9 sticks have something more written

[Roger_D25]

From what I've found the CAS5 modules should be Aeneon IC's and the CAS4 modules should be Micron D9GCT (B6-37E), but of course I could be wrong? Both kits look like their running the same exact IC's like you said? Can someone with more knowledge straighten us out on these IC's please? I'm very curious because I'm activly trying to hunt down a kit of Adata modules but the PC2-8000 flavor. In any case thanks for pulling the spreaders off and snapping a couple shots, much apprecaited!

Oh yeah, how are these kits running for you, what speed and what voltage do they like? That might help with identifiying what IC's they are?

[Quentin]

A-data 2x1Go Pc6400 Extreme Edition
2.4v



Cas 4 @ 2.4v ~500Mhz

[ghosty1234]

2x 1024MB Adata Extreme Edition 800+ 4,4,4,12 @2,1-2,2 Volt
M20AD9G31417OINE58
S/N: 701TU (ADQVD1A16)

E6600 L630A767
Abit AW9D-Max (no Mods, all default, MCH@1,95, CPU@1,65)

1. 440 FSb @1:1 @2,45 Volt / after Pi 4M



2. package



3. tower



4. Everest SPD timings



Conclusion:

This Ram-Chips seems to be very solid. I just tested @1:1. They were even 1M stable @460, 4,4,4,8 @2,65 Volt. Is a good Ram for 975X in order to drive
something between 400-440 "stable".
Maybe they can go higher, but my Abit limits me here till 460!:/ Cause my HZ&#180;s even do the same.

Good solid and cheap! Probably rebadged D9GCT&#180;s.

[ghosty1234]

Just passed 467 @1:1 with 4,4,4,12
SuperPi 1M with 12.234 sec.

Couldnt save image, lol^^ crashed

i&#180;ve to make fsb-mods on my Abit AW9D-Max.

[xs64]

Just passed 467 @1:1 with 4,4,4,12
SuperPi 1M with 12.234 sec.

Couldnt save image, lol^^ crashed

i´ve to make fsb-mods on my Abit AW9D-Max.

what is vdimm ?
I can run FSB 400 divider 4:5 ==> 500Mhz Mem 5-5-5-15 but can not run 500 1:1

[da_h00k]

Just for mentioning it's called vdimm voltage (vCore is for the CPU) and 2.65 is REALLY high voltage - hope you didn't used it 24/7

And 6400HZ should do more than 450mhz cl4 @ 2.65 btw

[ghosty1234]

yeap, i know......
My Board is really strange.....it has a barrier of fsb 460 @1:1. Is well known this Bug.
Untill 440, just tested, i need 2,25 Vdimm.

Now in this pic it has 2,35 Vdimm.
Well,...thats the maximum fsb of this board. Otherwise u have to make mods.




...
I am 100% sure, they run better on a good 965 Chip Board.

[AMD_Deluxe]

Hi m8s !

I have got ADATA Vitesta Memory too ..

The serial number is -->

M20AD9G3|4170|NES58
ADQVD1A16

Are this Micron D9 ?

[andrey_sebastia]

The chip labeled with ADATA. I'm not sure this is Micron, also the memory don't like voltage > 2.3 volt. I think it's elpida or promos or aeneon

The same thing happening to me
Not good at >2,3 V

I have A-Data Extreme 800+ 2G

On the chips says :
A-Data
AD29608A8A-250G
80702

On the label :
M2OAD9G3|4170INE58
s/n ADQVD1A16

here says
http://www.forumdeluxx.de/forum/show...ge=23&t=267167
"ADQVD1A16 -> umgelabelte Microns"

What are then ?
HELP

[zert]

On the label :
M2OAD9G3|4170INE58
s/n ADQVD1A16

here says
http://www.forumdeluxx.de/forum/show...ge=23&t=267167
"ADQVD1A16 -> umgelabelte Microns"

What are then ?
HELP

u clearly dont speak german
"umgelabelte Microns" means relabeled Micron Chips so most likely you got D9GCT chips

[andrey_sebastia]

u clearly dont speak german
"umgelabelte Microns" means relabeled Micron Chips so most likely you got D9GCT chips

But it's stange because it happens exactly like here

The chip labeled with ADATA. I'm not sure this is Micron, also the memory don't like voltage > 2.3 volt. I think it's elpida or promos or aeneon

"don't like voltage > 2.3 volt"
I've discovered that they work @ 1,90 v (min for DFI 975 x/g ) 844 MHz 4-4-4-8 1T !
I had in the past Team Xtreem w. Micron and I had to change 4 kits because after I used them 844 4-3-3-1 @ 2,45 v they didn't post any more @ 1,90v (reset bios) and I had been refunded
It seems to me that these are 90nm chips (because they work @ low voltages), maybe Promos
Right ? What do you think?