Quote Originally Posted by AbelJemka
Full bios settings?


Many thanks to eva2000 for creating the template!!!!
DFI ICFX3200-T2R/G 12/22 official bios:

Memory Clock Frequency: DDR-533


Control CPU Frequency: Manual
x CPU Frequency (Mhz):450
NB FSB Strapping:266
PCI-E Overclock: 100
Software Reset Clockgen: Enabled
Memory Overclocking: Enabled
Overclock Frequency (Mhz):499

CPU Vid Control: 1.45
CPU VID Special ADD: 103%
DDR2 Ram 1.8 Voltage:2.39
CPU VTT 1.2V Voltage: 1.44
NB Core 1.2V Voltage: 1.59
NB PLL 1.8V Voltage: 2.03
NB PLL 1.2V Voltage: 1.29
NB PCI-E 1.2V Voltage: 1.22
NB Core 1.2V convert from: 2.14
SB Core 1.2V Voltage: 1.23
Clockgen Voltage: 2.92
GTL REF Voltage control: Disabled
CPU Core 1/2 GTL REF Volt: 48
CPU Core 3/4 GTL REF Volt: 48
North Bridge GTL REF Volt: 128
CPU PLL Setting Overide: Enabled
PLL Override loop count: AUTO
Conroe P-State Multiplier: AUTO
C1E Function: Disabled

CS Output Timing: AUTO
CK Output Timing: AUTO
Dual channel Split Mode: Auto
ADDR/CMD Driving Pre-AMP: Disabled
ADDR/CMD Driving Strength: 12
Clocking Driving Pre-AMP: Always
Clocking Driving Strength: 12
Address/Command Timing: 1T
Memory Timing Select: Manual

CAS Timing (TCAS): 4
Read RAS-CAS Delay (TRCDR):4
Write RAS-CAS Delay (TRCDW):4
RAS Precharge Time (TRP): 4
Cycle Time (TRAS): 12

Row Cycle Time (TRC):21
Refresh to Active (TRFC):40
Bank to Bank CMD (TRRD): 3
Write Recovery (TWR): 6

Read-Write Command (TRTW): 3
Write-Write CS (TWTW_CS): 2
Write-Read Command (TWTR): 3
Write-Read CS (TWTR_CS): 2
Read-Read CS (TRTR_CS): 2
Read Data Transfers: 5

Memory Auto-Calibration
Read Data Transfer: Enabled
Read Strobe Delay: Disabled
Read Strobe Arrival: Enabled


Anything else not shown here is not changed.