Asus P5N32-E SLI Plus

[Cranox]

Max selectable voltage in bios are 1.9v, But it dosent matter wat i set it to. over 1.4v that is. Selecting 1.55, still gets me max 1.42, setting 1.6v gives mi 1.42. I dont want to select any more if the boards decide to actually change the voltage to the setting i select.

I read that there is a gap between 1.4v and 1.6v , if u choose 1.625v then 1.625v u get

[Naughtyboy]

I have the gap to...but it sets in at 1.3..anything between 1.3 - 1.6 I get 1.39...seemse to be pretty stable there.
Haven´t tried above 1.6 yet...but will do later.

[NiCKE^]

Do anyone have a working clockgen for this board? I want to boot at 424 and raise the fsb in windows up to 433 so I can get a lower strap, but it seems like the clockgen on cpuid.com isn't working correctly with this board

*EDIT* NV I found the Beta *EDIT*

[Aldy402]

thought u guys might want this for reference

[onthepulse]

Would someone please post some max OCs with the PLUS version? I just bought one and am dying to see if it performs like/better/worse than the non-plus...

[NiCKE^]

For some reason I can't get passed 4GHZ, I don't know the reason but just dosen't work for me with this board. Could be related to some option maybe but I don't know for sure.

[bingo13]

Would someone please post some max OCs with the PLUS version? I just bought one and am dying to see if it performs like/better/worse than the non-plus...

I hit 7x515 with a E6300 with it being dual Prime stable, tried for 7x525 and corrupted the CMOS. This is with the new 0404 BIOS that corrects a few issues and hopefully will be released shortly.

[zbogorgon]

*EDIT* NV I found the Beta *EDIT*

found clockgen beta for i680, but it doesn't seems to work on this mobo, i get BS everytime

p.s and could you post a pics of your vcore mod, please

[onthepulse]

I hit 7x515 with a E6300 with it being dual Prime stable, tried for 7x525 and corrupted the CMOS. This is with the new 0404 BIOS that corrects a few issues and hopefully will be released shortly.

Sounds pretty nice. Can't tell you how many times I corrupted the BIOS on my DFI Expert

What cooler are you using?

And, NiCKE^, if I got to 4GHz, I would be happy :thumbsup:

[shimmishim]

i was looking at the table and saw an Asus Striker (non-extreme)...

Has anyone seen one of these or is this a new board that's going to be released like the P5N32-E+

[bingo13]

Sounds pretty nice. Can't tell you how many times I corrupted the BIOS on my DFI Expert

What cooler are you using?

And, NiCKE^, if I got to 4GHz, I would be happy :thumbsup:

I am using the Tuniq 120.

[Desert Eagle]

I hit 7x515 with a E6300 with it being dual Prime stable, tried for 7x525 and corrupted the CMOS. This is with the new 0404 BIOS that corrects a few issues and hopefully will be released shortly.

Did you reached this high fsb's with the original chipsetcoolers/heatpipes, or was it with aditional cooling? Because those heatpipes became very hot.

[sxs112]

[inzer890]

Have sm1 put 1.625v or more? Does it really wors? or just another myth?

[NiCKE^]

50k VR, I think you can also use a 20k.

[onthepulse]

Post some more OC screenshots please...

My P5N32ESLI+ is arriving next week. I am going with the retail E6400, Thermalright Ultra-120 and my Leadtek 7600GT SLI

Not 100% sure on the RAM though. I am kinda inclined to pick up a cheap set of A-Data DDR2-800 Vitesta and just aim for 450-470FSB at 8X multiplier.

Any suggestions on the RAM? Not sure about buying Micron if the ADATA will do DDR2-900+. What do you guys think?

[mit78]

this board its good for me,in combination with e6600,and 8800gts
i obtained in 2006 10321 points ,with cpu at 3000 and gts at 630/1980.
but its confusion with chipset 650i or 680i?wai plus maybe minus?
later edit:i discover de sb ,and write 590i not 570i,in cpuz show 570i,complectly wrong.
asus mistake something

[zbogorgon]

thx NiCKE^ , worked like a charm

[Messiah]

Post some more OC screenshots please...

My P5N32ESLI+ is arriving next week. I am going with the retail E6400, Thermalright Ultra-120 and my Leadtek 7600GT SLI

Not 100% sure on the RAM though. I am kinda inclined to pick up a cheap set of A-Data DDR2-800 Vitesta and just aim for 450-470FSB at 8X multiplier.

Any suggestions on the RAM? Not sure about buying Micron if the ADATA will do DDR2-900+. What do you guys think?

Air cooling[room temp arround 0°C]mainbord was not modded or anything. config ATM C2D E6600@4312MHz 1.70V, TR Ultra-120, Patriot 2x512MB DDR2 6400@805 5-4-4-15, P5N32-E SLI Plus. I believe that motherboard has potential

[mit78]

its 680i 100%,i have a friend with non plus,its same bios,advantage my,not have electrolitic,just tantalum and polymer.

[onthepulse]

Air cooling[room temp arround 0°C]mainbord was not modded or anything. config ATM C2D E6600@4312MHz 1.70V, TR Ultra-120, Patriot 2x512MB DDR2 6400@805 5-4-4-15, P5N32-E SLI Plus. I believe that motherboard has potential

Awesome results. If I get that far, I'll be over the moon

[xs64]

Someone please tell me how to change Vcore in this board ?
I mean when i set Auto and not overclock , it shows 1.325V , but when i increase CPU bus , it shows 1.425V , via Bios and Windows too

[Tuppen^^]

Air cooling[room temp arround 0°C]mainbord was not modded or anything. config ATM C2D E6600@4312MHz 1.70V, TR Ultra-120, Patriot 2x512MB DDR2 6400@805 5-4-4-15, P5N32-E SLI Plus. I believe that motherboard has potential

what temps did you have there? does a e6600 manage 1.70v?

[xs64]

you guys who has this board can teach me how to adjust Vcore.

Bios 0402 beta
My Bios setting are:
- SLI Broadacst Aperture : Disabled
- Nvidia GPU Ex : Disabled
- Linkboost : Disabled
- SLI Memory : Disabled
- All spread speatrum control : Disabled

In overclocking tab :
- CPU Internal Thermal Control : Disabled
- Limit CPUID Maxval : Disabled
- Enhanced C1 (C1E) : Disabled
- Excecute Disable Bit : Disabled
- Virtualization Tech : Disabled
- Enhanced Intel Speedstep Tech : Disabled
- LDT Freq : 5x

Vcore = auto or 1.325v
CPU Multi = 7 (E6300)

When i run bus 400 (1600 QDR) linked --> sync bus Ram = 800DDR2
Vcore in Bios and Windows was 1.425v

When i run bus 429 (1716QDR) linked ---> sync bus Ram = 858DDR2
Vcore in Bios and Windows was 1.525v

Any setting in Vcore is not affect , and the board seems automatic set the Vcore depend on the bus running

So anyone can help me ?

[Messiah]

what temps did you have there? does a e6600 manage 1.70v?

1.temps were round 20-25°C.
2. obviously