Water Cooled Case Gallery

**TEkNØ** · 12-28-2006, 06:52 AM

Originally Posted by IanY

Signore TEkNO,
Which reservoir is that? Nice machine.

Originally Posted by Patriote

Nice Rig there Mr. TEkNØ.

Originally Posted by Solarfall

hey TEkNØ what is that reservour you have there, and btw very nice rig.

Originally Posted by alejo

Very nice, TEkNØ!

Originally Posted by logan

woww~ nice TEkNØ

Most of my cooling parts are made in Italy: waterblocks by Lunasio Cooling and reservoir by Ybris Cooling.
The second one is called Crystal Trap and it works both as air trap and little res.

**Timmay** · 12-28-2006, 07:11 AM

**welshtom** · 12-28-2006, 12:12 PM

Originally Posted by matt100

I'm intending to start posting here a bit more often, I thought I might as well start by showing off a bit

My first crack at a dual loop system (all internal in a pc65b

)

my old chilly1/water cooled sli system..

A micro atx system, all 1/2" ID, chipset, cpu and gfx cooled almost fully internal.

my watercooled sn25p shuttle, again all internal, again 1/2" and again nb/cpu and gfx cooled

And finally, I missed my dual loop system so much I've gone back to it.. 2 loops, fully internal, 1/2" ID, loop 1 pa120.1, EK s775 block, ddc pump. Loop 2 pa120.1, EK 7950gx2 block, ddc pump and 2 thermotubes on the roof!

More pics of all available if anyone wants them!

Excellent work as always Matt, an ambassador to the watercooling world for the UK

.

Loving the red colours thats for sure

**radwerx** · 12-29-2006, 10:20 AM

Here's my humble setup after stepping into the world of Conroe....

**TheJollyFellow** · 12-29-2006, 07:28 PM

that is one tiiiiight turn coming from your block, yay for zip ties!

I always like internal loops, nice and clean

**radwerx** · 12-29-2006, 11:38 PM

Thanks. There's a problem that I was hoping I could find help here though...you see, the placement of the radiator blocks about 1/3 of the intake to the PSU. I'm not sure if its due to this blockage or the proximity of the radiator to the PSU that's causing the PSU to heat up quite a bit under full load. When idling its fine though...Have thought of drilling a hole on the top and mounting the radiator there but that might rob the radiator of even more cool air.

**NickS** · 12-30-2006, 12:12 AM

Heres my setup. Temporarily running on a TT TR2-430w PSU. My new Enermax Liberty 500w is on its way!

**Patriote** · 12-30-2006, 05:36 AM

Lo0L! Lots of comps there Guys! I see some well build in there!

**alejo** · 12-30-2006, 05:49 AM

That's a nice system NickS. I just bought that same case and I'm looking to do something similar. Do you have more shots?

**NickS** · 12-30-2006, 10:20 AM

I'll take some more when I get the new PSU man

. In a few days.

**Nicksterr** · 12-30-2006, 10:46 AM

Originally Posted by NickS

I'll take some more when I get the new PSU man

. In a few days.

Nick I like the case but you cut it (which was fine) but you added on something external!!!

**NickS** · 12-30-2006, 12:09 PM

Hehe, thats temporary man. My regular PSU wasn't enough anymore so I'm using that one for now. My new Enermax Liberty is on it's way here. That will be internal.

**Solarfall** · 12-30-2006, 12:57 PM

Originally Posted by NickS

Hehe, thats temporary man. My regular PSU wasn't enough anymore so I'm using that one for now. My new Enermax Liberty is on it's way here. That will be internal.

good to hear man, or this may happen to it. here's my hoover...eh i mean psu

**Cupcake** · 12-30-2006, 01:14 PM

How do you guys like mine

not bad for my first setup right

This was lapped while still in the loop

Not to shabby

This is just a pic of my 7950 to show how I had to bend the ramsinks

And Finally

**Solarfall** · 12-30-2006, 01:18 PM

you lapped your gpu blog while it was still in the loop, you are my hero

but seriously nice looking setup you have there. those YSTech 135cfm Fans must be louder that hell.

**Cupcake** · 12-30-2006, 01:21 PM

lol, I get that " OMG YOU LAPPED IT WHILE IT WAS IN THE LOOP" thing alot

It just took alot of patience and steady hands

**NickS** · 12-30-2006, 01:39 PM

Looks nice man

Good lapping job too.

**marauder16** · 12-30-2006, 04:07 PM

does anyone except me don't see a majority of pictures, like just few of them load, the rest are like they don't exist, there isn't even that small red cross which indicates that the picture failed to load...

btw. NickS what's that cooling your RAM? seems like a big HS?

**NickS** · 12-30-2006, 05:10 PM

OCZ XTC RAM Fan

**2k7zero** · 12-30-2006, 05:49 PM

Originally Posted by umop ap!sdn

How do you guys like mine

not bad for my first setup right

And Finally

Sweet setup man. I'm looking into the newer version of that case. How's the mounting system? Did u take out the rear case fans because of some problem, if so i'll do the same?

**Patriote** · 12-30-2006, 07:21 PM

Lo0L! Nice Job Cupcake! I really like the look on the "Extreme" bended ramsinks! Why haven't you just cut them a little so there is enough clerence for the Tubing

I bet it was harder to bend them like that! Oh and Nice job on the Lapping! while it was into the loop ?!

**Cupcake** · 12-31-2006, 10:42 PM

My ram gets pretty hot casue it was vmodded so I left the whole thing there

and it looks cooler

another thing, I took out the back fans simply cause I dont need them, the fans on the rad suck the air out, my chipset never goes above 40c with the stock cooling .

Thanks for the comments guys, BTW Im gonna top mount a 2x120mm rad when I set up my machII

oh and no modding has been done to the case to get everything to fit although loads of zipties have been used to hold on the rad as you can see

**coyotetu** · 12-31-2006, 10:58 PM

Originally Posted by marauder16

does anyone except me don't see a majority of pictures, like just few of them load, the rest are like they don't exist, there isn't even that small red cross which indicates that the picture failed to load...

Well, I haven't seen that at all really in the recent posts, but if you're talking about some of the older posts, yeah, I see that quite a bit.