Catalyst 6.11 are out

**LowRun** · 11-15-2006, 04:39 PM

http://ati.amd.com/support/drivers/xp/radeonx-xp.html

**hausner** · 11-15-2006, 05:59 PM

Originally Posted by LowRun

http://ati.amd.com/support/drivers/xp/radeonx-xp.html

gonna testing now, thanks for the info man

**mascaras** · 11-15-2006, 06:03 PM

dont work With x1950xt , dont know why

**generics_user** · 11-16-2006, 08:45 AM

New Features
This release of Catalyst® introduces software CrossFire™ support for any combination of Radeon® X1900 and X1950 installed in a system running either the Windows XP or Windows XP Professional x64 Edition operating system.

--------------------------------------------------------------------------------
Note: Software CrossFire™ is not supported on the Radeon® X1950 Pro product line.

unteresting, no more master cards

**keldererik** · 11-16-2006, 09:12 AM

I wonder if they support crossfire on Nforce 4 in the future. Or is it already possible with custom software or some other trick ? I've been reading some stuff about it but no real answers.

**mascaras** · 11-16-2006, 10:24 AM

i have here two x1950 , one x1950xtx 512mb and one x1950xt 256mb , so so this means i can run crossfire ??

regards

**cantankerous** · 11-16-2006, 10:28 AM

I highly doubt this is true. Either ATI worded that sentence badly or we are looking far too deeply into it. There has been no mention of it being that easy to run crossfire, infact the opposite has been said. From reading around on other forums people have not been able to reproduce what ATI is claiming on any chipset with any video cards that weren't properly hooked up with a master/slave and the dongle on an ATI chipset.

**mascaras** · 11-16-2006, 10:43 AM

Originally Posted by cantankerous

I highly doubt this is true. Either ATI worded that sentence badly or we are looking far too deeply into it. There has been no mention of it being that easy to run crossfire, infact the opposite has been said. From reading around on other forums people have not been able to reproduce what ATI is claiming on any chipset with any video cards that weren't properly hooked up with a master/slave and the dongle on an ATI chipset.

But this are the first Catalyst drivers that have Software Crossfire(tm)

regards

**FlyBoyGeo** · 11-17-2006, 06:09 AM

What are the results of the new cat's? Any noticable difference?

**Viss** · 11-17-2006, 06:13 AM

Not for me, at least in 05 and 6:

6.10 off 05

6.11 off 05

6.10 off 06

6.11 off 06

**w0mbat** · 11-17-2006, 06:21 AM

AMD Catalyst 6.11 update for AMD Radeon X1950 XT
Source

Just download and unpack in ur Catalyst folder. Thx to b|ank0r.

Windows XP x86
X1950XT_611_FINAL_W32-v11.zip

Windows XP x64
X1950XT_611_FINAL_W64-v10.zip

**mascaras** · 11-17-2006, 07:36 AM

it works for me , im with 6.11 now

regards

**hiGhland** · 11-17-2006, 07:43 AM

Apparently these can run crossfire without the master card!!!

http://it-review.net/index.php?optio...=686&Itemid=91

I'm hoping someone can confirm this with 2 x x1900xtx....

**mascaras** · 11-17-2006, 08:03 AM

We have just received a Catalyst driver based on the 6.11 version that is supposed to eliminate the need for a master card, effectively enabling Crossfire with two regular graphics cards. We’ve put it to the test on our Conroe 975X setup with two ASUS EAX1950XTX cards, and guess what – it works!

GOOD JOB from ATI

regards

**cantankerous** · 11-17-2006, 10:29 AM

GREAT. now see if it works on 2 X1900XTX on another chipset other than 975.

**IvanAndreevich** · 11-17-2006, 05:08 PM

What the hell why isn't this getting more attention?

Let's see some benches!

**DAK1640** · 11-17-2006, 05:28 PM

I am confirming these run the X1950 Pro with Crossfire...Great drivers...good job ATI

**nicepun** · 11-17-2006, 06:35 PM

Originally Posted by DAK1640

I am confirming these run the X1950 Pro with Crossfire...Great drivers...good job ATI

with or without the bridges? Also, I was hoping they would allow us to individually OC each card and to play around with the fan speed for each card as well.

**DAK1640** · 11-17-2006, 06:43 PM

Hmmm...I connected the dongles (bridges). Didn't try without. CCC changes affect both cards concurrently...thus no individual OC'ing when in CF mode. Fans are controlled together, not individually (in CF mode). These are Fassst.

**nicepun** · 11-17-2006, 06:47 PM

Originally Posted by DAK1640

Hmmm...I connected the dongles (bridges). Didn't try without. CCC changes affect both cards concurrently...thus no individual OC'ing when in CF mode. Fans are controlled together, not individually (in CF mode). These are Fassst.

Not individual OCing, but only one card as usual.

**Pyr0** · 11-17-2006, 06:49 PM

to enable crossfire, i needed to have both bridges installed

crossfire is still not great on the 965 chipset

FEAR won't even load with it switched on

**DAK1640** · 11-17-2006, 06:53 PM

Systool huh? That's a new one on me...but then again, I am as old as the pyramids

**nicepun** · 11-17-2006, 06:56 PM

Originally Posted by DAK1640

Systool huh? That's a new one on me...but then again, I am as old as the pyramids

Oh don't use systool for OCing though. I just used it to show that only one card it's acutally OCed when using CCC overdrive.

**DAK1640** · 11-17-2006, 07:07 PM

Thx...Systool managed to lock up my rig while I had WCG WU at 98.3%...No milk and icecream for you nicepun.

**TEDY** · 11-17-2006, 11:36 PM

would this work on my system?

Thread: Catalyst 6.11 are out

Thread Tools

Search Thread

Rate This Thread

Display

Catalyst 6.11 are out

Bookmarks

Bookmarks

Posting Permissions