Water Cooled Case Gallery

**CamB** · 11-15-2006, 08:49 PM

I've got a couple:

- Silverstone TJ06 with stealth cover over optical bays and psu area, with extra fans
- E6600, DFI Infinity with a Thermalright HR-05
- DD TDX s939, with a 3mm alloy plate used to adapt to LGA775
- D4 pump, BIP 2 and a fillport
- and some other stuff

No pictures with pretty lights for that one.

**CamB** · 11-15-2006, 09:05 PM

And slightly more elaborate:

- old yeong yang (old as in it had a Pentium 2 inside) case, cut up for a side window, 120mm fans, and repainted
- Abit AB9 with an E6300, etc - it's in my sig
- DD TDX, BI Stealth GTS 240, D5 pump and a fillport

**~~septim~~** · 11-16-2006, 02:25 AM

hmm Camb on the first rig you had your rad supplying your pump, i think most would say its supposed to be the T-Line before pump inlet, easier to fill and prime...

other than that, its a very nice and clean install, nice use of 3mm plate there.
and the yeong yang simple also, only usual suspect of cube cases are the back side of mobo where the wires are located...

**Vandread** · 11-16-2006, 02:32 AM

Originally Posted by krueml_

Here's a pic of my old system:

http://www.4eweb.de/pc/tj07/40.jpg

What has changed in your new system?
And how did you mount the rad in your tj07 case?

**Grinch** · 11-16-2006, 05:34 AM

here is a pic of my setup:

**krueml_** · 11-16-2006, 07:56 AM

Originally Posted by Vandread

What has changed in your new system?
And how did you mount the rad in your tj07 case?

I sold it..

The rad is in the part below, behind the PSU.

There you can see it...

**Bail_w** · 11-16-2006, 02:21 PM

**Herr Brun** · 11-17-2006, 02:25 PM

Originally Posted by hopper

heres the loop for inspecting

Shouldn't res be before pump? Looks like rad - cpu - res - gpu - pump - rad. Should be rad - cpu - gpu - res - pump - rad

**Garrett** · 11-18-2006, 01:21 AM

It seems to me it is

Look closer
the bottom barb of the res makes a 180 degree turn to the inlet of the pump... this pump has the outtake on top

**badhabit** · 11-18-2006, 01:56 AM

Yeah, look where the tubing from the bottom barb of the Micro res goes...it seems to disappear but the only place it could possibly end is the pump. And if you look closely, it does. The D5 can be turned on its side and mounted that way pretty easily, so I'd assume the upward barb is the outlet.

**Herr Brun** · 11-18-2006, 02:12 AM

Originally Posted by Garrett

It seems to me it is

Look closer
the bottom barb of the res makes a 180 degree turn to the inlet of the pump... this pump has the outtake on top

Yeah, I see now. Probably was tired when I wrote the first post :P

**Sniper_Merc** · 11-18-2006, 04:40 AM

The worklog: http://snipershide.us/index3.htm

Took me a month to get this all working proper, clicky link above for the full story. (no jokes bout water cooling kits or i hunt you down and kill yer kitten)

big pic linky
http://snipershide.us/images/sniper/...complete_1.jpg

**~~septim~~** · 11-18-2006, 07:10 AM

hmm sorry man, not all of us have em kittens...
so no comments for now...

**Sniper_Merc** · 11-18-2006, 07:23 AM

There's allways the animal shelter..... :P

**_G_** · 11-18-2006, 09:31 AM

kittens around here shoot back

**Foxy_PT** · 11-19-2006, 07:09 AM

Hi m8´s

Here are some pics of my current rig, hope you guys enjoy it

That´s right, it´s an Antec P160, but i painted it black and did some modifications.

[]´s m8´s

**el rolio** · 11-19-2006, 08:21 AM

AWESOME job. love the look of the p160 in black.

**NickS** · 11-19-2006, 09:30 AM

Me to! Antec needs to smarten up. Most of us prefer black over silver!

**Foxy_PT** · 11-19-2006, 09:43 AM

Thanks you guys

I also really love the looks of it in black, its a beauty

**Patriote** · 11-19-2006, 09:53 AM

Yup, Nice Job Foxy_PT

**spudnik** · 11-20-2006, 05:51 PM

hey Foxy_PT, can you tell me what rad you're using, and what you're cooling?
Just out of sheer curiosity.

**Khanhfucious** · 11-20-2006, 06:12 PM

NOT MY CASE!

The Alienware W/C is kinda gay. Its got corrugated 1/4" hoses, a tiny pump, and a single 120mm Radiator. The waterblock is pretty simple, and theres a fan over it.

**el rolio** · 11-20-2006, 06:38 PM

shoot, id still take one and mod it for a rad up top. i love em. hate the new versions ewww

**railmeat** · 11-21-2006, 12:49 AM

pic above showing the fans pulling off the rad with 1\2 in space as shroud effect from rad for max effiency with no fan dead spot..

sold 7950gx2 for $350 added $100 to it for evga 8800gts be here wed,also my single 150 raptor-x is installed with no recent pics as of yet til i get the 8800gts installed.22" Diamondtron NF Mon bf2 @ 1800x1440@70hz 100+fps.ppl ask whats the box underneath holding all my watercooling stuff?custom 18ga stainless steel box i built with plexiglass front holding swiftech p655 pump,dd tdk,triple 120mm rad on back,
1\2 tygon with the (2) 1\2 tygon tubes(inlet\outlet)coming up from the bottom and going back down into it.could never imagine putting a radiater inside my case sharing ambiet hot air with it?never get why ppl do that?radiater should never be in case period.13 case fans + water should be good i think.

ppl hurt my eyes when they dont loom there wires.... http://www.svc.com/sleeving.html $20 and 2 hours..
http://www.svc.com/sleeving-flexo-pe...3-colors-.html

bomb deals
http://www.svc.com/clearance.html

$80 stacker case blowout..
http://www.svc.com/promotions.html

**l2obert** · 11-21-2006, 01:03 PM

Not as nice as most that's for sure. But here's mine anyway. I'm replacing my res with one of EK's. On the hoses they are only a week or so old but where it looks like air; it's some kind of spider web looking marks. No idea.

Thread: Water Cooled Case Gallery

Thread Tools

Search Thread

Display

Oy, I hate computers.....

Bookmarks

Bookmarks

Posting Permissions