Asus P5W64 Pro 470FSB out of the box

[Dumo]

thx, but I wasn't asking for vmods and i am already registered for some time now

i don't know what dumo meant with 1.7 OVP, i also did the mod and trimmed up to 1.75v with no problem, i didn't go any higher, but i think that i shouldn't be a problem.

Thats a good news zbo

I haven't done any mods on my second board here (and OVP was with DG2, so I assumed its the same with 64) The first board won't post probly because of corrupted bios or other cause.

Heres testing with cold.....1 core disabled (around -35C) before go for really cold one



@ >1.65 Vcore bios..its starts to undervolted by .03V

Heres tried max bios 1.7Vcore..Both cores enabled..

[Planet]

Nice results there Dumo. You always seem to get some of the best boards. Cant wait to see some LN2 runs on it.

[N15M0]

Hey guys I have this motherboard with a 6600 paired with th eopb edition ram. But I cannot seem to overclock well. Anyone care to share some tips? Could it be due to the chip limitation? Its a week 24 chip. Or does using sata hdd affect the overclocking performance? I used 1.4 (Ai booster) to get my 6600 to 3gig but it is only stable for 15-20 min. vmch is 1.6, vfsb is auto, vdimm is 2.1 at 5 5 5 15. So I think that the ram would not be the limiting factor. Any help?

[AndreYang]

Vcore 1.7V+ has some problems. I will fix vcore in the few days.

[Dumo]

Vcore 1.7V+ has some problems. I will fix vcore in the few days.

Thanks Andre

470X10 with just SS will be nice

[N15M0]

Hey guys I have this motherboard with a 6600 paired with th eopb edition ram. But I cannot seem to overclock well. Anyone care to share some tips? Could it be due to the chip limitation? Its a week 24 chip. Or does using sata hdd affect the overclocking performance? I used 1.4 (Ai booster) to get my 6600 to 3gig but it is only stable for 15-20 min. vmch is 1.6, vfsb is auto, vdimm is 2.1 at 5 5 5 15. So I think that the ram would not be the limiting factor. Any help?

Any help?