FW 85.96_mod for SLi on any chipset

[Big_Sam]

Thx, but it seems, that my 7900GX2 not working correct on the DS3..

Yes, it can be.
Probably is required BIOS updating . I recently have met a similar situation with some P5LD2 models.

[funkflix]

Probably is required BIOS updating .

For the board i presume? I don't think, Gigabyte will release a special Bios for this hand full of users with the 7900GX2, thats the problem..

Only idea i have, is to prepare the bios of the 7900GX2 more similar to the 7950GX2, maybe this will work?! The problem is, last time i was into nvidia and bios editing is long time ago (5900XT), hope i will not flash the card to death..

[orbano]

Hi!

I've just tried this driver with 2 Galaxy 7300GTs. Unfortunately 3dmark05 crached. Not during any test, but between them. Once even windows GUI failed to render.
Do you have any idea? My conf.:
Yonah T2300
Aopen i975xa-ydgh
2xGalaxy 7300GT 256mb gddr3
410w chieftec psu

Thanks in advance!

[Big_Sam]

Hi!

I've just tried this driver with 2 Galaxy 7300GTs. Unfortunately 3dmark05 crached. Not during any test, but between them. Once even windows GUI failed to render.
Do you have any idea? My conf.:
Yonah T2300
Aopen i975xa-ydgh
2xGalaxy 7300GT 256mb gddr3
410w chieftec psu

Thanks in advance!

This run of 05 was with OCing or without it?

[orbano]

This run of 05 was with OCing or without it?

At stock speeds...

all of the 3 tests passed without problems, but running them at once caused 3dmark to suddenly exit when loadint the next test (sometimes between the 1st and the 2nd, sometimes between the 2nd and the 3rd)...

[Big_Sam]

At stock speeds...

all of the 3 tests passed without problems, but running them at once caused 3dmark to suddenly exit when loadint the next test (sometimes between the 1st and the 2nd, sometimes between the 2nd and the 3rd)...

Very strange things

Is it 85.96 or may be 84.66?
...it happens only in 05 or in others too?

What PCI-E frequency do you have ? If it is equal 100Mhz try to lift it up to 110 - 115... if it will not help, PM me.

[DEVIL K-ce]

I have problem

GB DQ6 + 2 x 7300GT in SLI with 85.96mod.

When I overclocking my cpu board has run SLI on 16/1

When setup is stock anything is ok, SLI run 16/4

I try raised my PCI-E freq and nothing

[Big_Sam]

I have problem

GB DQ6 + 2 x 7300GT in SLI with 85.96mod.

When I overclocking my cpu board has run SLI on 16/1

When setup is stock anything is ok, SLI run 16/4

I try raised my PCI-E freq and nothing

I think that it's hardware a problem.
For example, such problem is absent on P5WD2 on 955, there it is possible to make 4X or 2X in BIOS.

[DEVIL K-ce]

Yes it's hardware problem. I change mobo to MSI PowerUp on 975X and SLI work normaly : 8/8


Thank's for help Sam

[BulldogPO]

Big Sam:
7950GT is a single GPU card.

[Eldonko]

Anyone know where I can get an SLI bridge that fits DQ6? I see some DQ6 come w/ one included, but mine did not.

[pablo]

you can get them here


http://estore.asus.com/shop/item.asp?itemid=229

[Eldonko]

Awesome, thank you!

[theteamaqua]

does this work with GeForce 7800 GTX SLI on 965 boards like P5B Deluxe?? how bout GeForce 7800 GTX SLI on 975 boards??

[xcalibra]

Hi Sam, can you post a 85.96_mod x64 driver?
I cannot use your one in 64bit XP.

Thanks.

[Big_Sam]

Big Sam:
7950GT is a single GPU card.

Excuse me, I have mixed it with GX2

I think that it will work with 85.96 if to edit nv4_disp.inf file.

does this work with GeForce 7800 GTX SLI on 965 boards like P5B Deluxe?? how bout GeForce 7800 GTX SLI on 975 boards??

Yes, all will work without problems. Once I tried 7800 on 955, but there is no difference...
http://www.xtremesystems.org/forums/...1&postcount=64
And coolaler run SLi many times on 965:
http://www.xtremesystems.org/forums/...hlight=SLi+965
http://www.xtremesystems.org/forums/...hlight=SLi+965

Hi Sam, can you post a 85.96_mod x64 driver?
I cannot use your one in 64bit XP.

Thanks.

Unfortunately I don't have time to make it, though it is possible.

[webwilli]

I think that it will work with 85.96 if to edit nv4_disp.inf file.

Which Expert can edit the nv4_disp.inf for 7950GT Support??

I will buy two cards...

[Big_Sam]

Which Expert can edit the nv4_disp.inf for 7950GT Support??

I will buy two cards...

I can edit it for you but only on Sunday.

And I not can give you 100% guarantee that it will work.

First of all it is necessary to test it.

[apfubar]

I can edit it for you but only on Sunday.

And I not can give you 100% guarantee that it will work.

First of all it is necessary to test it.

I did edit the Inf file and try these drivers with my 7950gx2's on the 975 chipset, but it failed. It will be interesting to see if the 7950GT is ok.


Cheers,
AP
(edit: realised it's the 7950GT not the GX2 doh)

[theteamaqua]

umm does this support GeForce 7800 GTX SLI on 975 chipsets??

u only said 7600 , 7900 and 7300

[theteamaqua]

another thing, what about future games, apps??

umm dont u need nVidia to write SLI profiles for each programs?? otherwise it will perform like one card??

[Big_Sam]

umm does this support GeForce 7800 GTX SLI on 975 chipsets??

u only said 7600 , 7900 and 7300

Very strange question.
Certainly works.

another thing, what about future games, apps??

umm dont u need nVidia to write SLI profiles for each programs?? otherwise it will perform like one card??

I do not know it... also it does not depend from me.
I can only tell, that once, I had to write such profile and put it in the driver, after that all successfully worked.

[theteamaqua]

hey one more question, what about 965 chipsets board?? like P5B Deluxe?? it has 2 PCI-E slots, can i run SLI on it?? im deciding between 975 n 965....


also do i need SLI bridge for this to work?? anyone know any links to this "SLI on non nforce board guide"?? any tutorial perhaps??

[Big_Sam]

hey one more question, what about 965 chipsets board?? like P5B Deluxe?? it has 2 PCI-E slots, can i run SLI on it?? im deciding between 975 n 965....


also do i need SLI bridge for this to work?? anyone know any links to this "SLI on non nforce board guide"?? any tutorial perhaps??

Did you see it? http://www.xtremesystems.org/forums/...&postcount=216
I cannot write two times same things on one page.

As for SLi bridge..., SLi will work without it but productivity will be a little below.

[theteamaqua]

lol my bad man i asked too many questions that i forgot to look