Biostar Tforce 965p deluxe

**Pt1t** · 08-04-2006, 08:57 AM

Originally Posted by Rol-Co

look like a board who got a lot of potential

1,8v on the nb is nice too , 450 fsb @ how much voltage?
somebody know where to buy online in europe?

450fsb @ 1.6v

Yep i know where to buy it, IN belgium

**JNav89GT** · 08-04-2006, 09:06 AM

I'm having issue with not being able to set cas manually in bios. My Mushkin HP5300 I'm trying in there has spd of 3-4-4-8 at 4200 and when I set ram multi to 233 ie 4200 to max fsb I can't get even 333mhz stable due to ram

. Even at default fsb, I can't assign cas manually to 4,5 or it won't post.

will try new bios and report back
retail 6300 on watercooling

**Pt1t** · 08-04-2006, 09:13 AM

http://users.skynet.be/pt1t/biostar/Ip96a803.rar

but i allready posted it on previous page.

**dinos22** · 08-04-2006, 09:15 AM

wow that's a big difference with the new bios

**The Stilt** · 08-04-2006, 10:32 AM

Thanks for the bios Pt1t

Here is a modified version with following changes:

**Unofficial Release**
For: Biostar TForce P965 Deluxe (Broadwater-6A79L0009C)
**Unofficial Release**

Bios version: IP96A803TSA

Changes compared to bios IP96A803

Fixed 1001 one typos

Added DMI information

Updated Memtest86+ v1.60 -> v1.65 (for Core 2 support)

Added RAS to CAS Delay (tRCD) 1 & 2 CLK options

Added RAS Precharge (tRP) 1 & 2 CLK options

Added Write Recovery Time (tWR) 1 & 2 CLK options

Added Internal Write to Read Command Delay (tWTR) 1 CLK option

Added Spread Spectrum option

Added Auto Detect PCI Clocks option

Added Enable / Disable L1 & L2 Cache option

- The Stilt - 08/04/2006

I´m currently using this very same build and it is working fine.

IP96A803TSA

Use included WinFlash to update the bios.
Ensure that you have "Update All" box ticked.

**Pt1t** · 08-04-2006, 11:02 AM

Originally Posted by The Stilt

Thanks for the bios Pt1t

Here is a modified version with following changes:

**Unofficial Release**
For: Biostar TForce P965 Deluxe (Broadwater-6A79L0009C)
**Unofficial Release**

Bios version: IP96A803TSA

Changes compared to bios IP96A803

Fixed 1001 one typos

Added DMI information

Updated Memtest86+ v1.60 -> v1.65 (for Core 2 support)

Added RAS to CAS Delay (tRCD) 1 & 2 CLK options

Added RAS Precharge (tRP) 1 & 2 CLK options

Added Write Recovery Time (tWR) 1 & 2 CLK options

Added Internal Write to Read Command Delay (tWTR) 1 CLK option

Added Spread Spectrum option

Added Auto Detect PCI Clocks option

Added Enable / Disable L1 & L2 Cache option

- The Stilt - 08/04/2006

I´m currently using this very same build and it is working fine.

IP96A803TSA

Use included WinFlash to update the bios.
Ensure that you have "Update All" box ticked.

**Rol-Co** · 08-04-2006, 04:21 PM

Originally Posted by Pt1t

450fsb @ 1.6v

Yep i know where to buy it, IN belgium

Link and price? realy interested, got a crappy infinity and a good asus here, wanna try this one.

**Pt1t** · 08-04-2006, 10:01 PM

http://www.compumsa.be/

**Pt1t** · 08-04-2006, 11:19 PM

Memtest is working fine

**dinos22** · 08-04-2006, 11:33 PM

can you run memory below 1:1

**Pt1t** · 08-04-2006, 11:41 PM

Originally Posted by dinos22

can you run memory below 1:1

no , there is only , 533 - 667 - and 800 in bios.

**LowRun** · 08-05-2006, 02:48 AM

Originally Posted by Pt1t

http://www.compumsa.be/

Linky not workin'

**Ferry82** · 08-05-2006, 03:20 AM

Originally Posted by LowRun

Linky not workin'

here you go:

http://www.compumsa.be/scripts/foxis...Item?id_art=43

**The Stilt** · 08-05-2006, 03:43 AM

SLI on Biostar TForce P965, sure

http://service.futuremark.com/compare?3dm05=2143183

The slots are actualling working with x16 & x4 speeds, so it is not a bug.

**Pt1t** · 08-05-2006, 05:12 AM

http://www.overclocking-masters.com/...-duo,t3427.htm

my thread on overclocking-masters

**Pt1t** · 08-05-2006, 06:01 AM

super 1M @ 475 fsb, it can do little more but i directly tried 500mhz and ... it crashed after 1sec

**dinos22** · 08-07-2006, 04:58 AM

Originally Posted by Pt1t

no , there is only , 533 - 667 - and 800 in bios.

i don't understand.........so you're saying 1:1 and higher......533 should be 1:1 yeah?

**Pt1t** · 08-07-2006, 05:05 AM

Originally Posted by dinos22

i don't understand.........so you're saying 1:1 and higher......533 should be 1:1 yeah?

it s 533 minimum for 266fsb

**LowRun** · 08-07-2006, 06:29 AM

Originally Posted by Ferry82

here you go:

http://www.compumsa.be/scripts/foxis...Item?id_art=43

Not working either

**Notyfus** · 08-07-2006, 06:44 AM

What's the error?
The site has just opened, so the dns are maybe not redirected for usa...

**elmor** · 08-17-2006, 03:41 AM

One question to The Stilt: How can you run sli on it when it only has one PEG-slot?

**DaWaN** · 08-17-2006, 03:54 AM

Originally Posted by elmor

One question to The Stilt: How can you run sli on it when it only has one PEG-slot?

Cut the plastic at the back of the PCI-e x4 slot so you can put a PCI-e x16 card in it

**Lestat** · 08-17-2006, 03:58 AM

wow this board is really giving the pack a run for their money!

hhmm newegg doesnt even have this baord... odd.

because i have a 6600 i always gotta ask.

what are you guys, in general seeing for 9x multi's for max bootable FSB>

**irenic** · 08-17-2006, 04:19 AM

i just bought this board, gonna test it now and will sell this if it is worse than my DQ6!

**elmor** · 08-17-2006, 05:07 AM

Originally Posted by DaWaN

Cut the plastic at the back of the PCI-e x4 slot so you can put a PCI-e x16 card in it

So, most of the pins are just for show, or are they only needed when running it in a higher-speeded PEG?

Thread: Biostar Tforce 965p deluxe

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions