Biostar Tforce 965p deluxe

**Pt1t** · 07-22-2006, 08:12 AM

Originally Posted by dinges

link plz

It isnt an online shop ^^ Just a friend who knows biostar dealer.

**SMa** · 07-22-2006, 08:17 AM

Originally Posted by dinges

link plz

²nd that!
link plz!

**Pt1t** · 07-22-2006, 09:52 AM

Originally Posted by SMa

²nd that!
link plz!

by him ... http://netcomputers.be/

It s a friend and his website isnt updated

Just mail him for a biostar mobo. (Belgium dealer is ITC multimedia , but you have to buy it by a shop).

**SMa** · 07-22-2006, 10:30 AM

My french isn't very good, so I'll ask here

Could you tell how much this board costs?
And when will you try other ram? I want to see how good it is at oc'ing

Also you quote Anandtech, but I can't find it. Could you link?

**Pt1t** · 07-22-2006, 11:02 AM

-->2*1go Gskill F2-6400PHU2-2GBHZ for wednesday
It cost ~170€
and http://www.anandtech.com/mb/showdoc.aspx?i=2797
But need also a new bios to do high fsb

**Stelios** · 07-22-2006, 05:36 PM

Originally Posted by Lestat

why would you use ECC ram anyways there's no benefit for a desktop pc and your overclocking is typically limited

There is benefit from overclocking ECC ram . You can clock higher because of the error correction . Articles in google say that there is a slow down when ECC tries to correct errors (2% approx) , but i haven't seen any slowdown myself .
I have 3 pairs of D9DQT (Fatbody) and all of them can clock about 15-20Mhz DDR2 higher when ECC is enabled . I run always with ECC enabled .
If i need the faster running memory (More Mhz) , i can have it without problems when enabling the error correction . Of course the benefit from clocking CPU higher is more than the "supposed" slow down of the ECC .

**Pt1t** · 07-25-2006, 04:13 AM

OK that boot correctly with 2*1go Gskill F2-6400PHU2-2GBHZ
and an E6600es Step 5.

**Pt1t** · 07-26-2006, 12:07 AM

Biostar TForce P965 Deluxe
http://www.biostar.com.tw/news/TForce_P965_Deluxe.html

Market Segment: Mid-Range/Performance
CPU Interface: Socket T (Socket 775)
CPU Support: LGA775-based Pentium 4, Celeron D, Pentium D, Core 2 Duo
Chipset: Intel P965 + ICH8R
Bus Speeds: 266 to 500 in 1MHz Increments
Memory Speeds: Auto, 533, 667, 800
PCIe Speeds: Auto, CPU, Fixed at 100MHz, 100MHz~200MHz
PCI: Fixed at 33
Dynamic Tuning: V6 Tech - 10%~15% \ V8 Tech - 15%~25% \ V12 Tech - 25%~30%
Core Voltage: Startup, 1.10000V to 1.80000V in 0.00625V increments
CPU Clock Multiplier: Auto, 6x-11x in 1X increments if CPU is unlocked
DRAM Voltage: 1.8V, 2.0V, 2.1V, 2.2V
DRAM Timing Control: SPD, 8 Options
FSB Termination Voltage: Auto, 1.2V, 1.3V, 1.4V, 1.5V
NB/SB Voltage: Auto,1.5V, 1.6V, 1.7V, 1.8V
Memory Slots: Four 240-pin DDR2 DIMM Slots \Dual-Channel Configuration \Regular Unbuffered Memory to 8GB Total
Expansion Slots: 1 - PCIe X16 \ 1 - PCIe X4 \ 1 - PCIe X1 \ 3 - PCI Slots 2.3
Onboard SATA/RAID: 6 SATA 3Gbps Ports \ Intel ICH8R \ (RAID 0,1,1+0,5,JBOD)
Onboard IDE: 1 Standard ATA133/100/66/33 Port (2 drives) \ VIA VT6410
Onboard USB 2.0/IEEE-1394: 10 USB 2.0 Ports - 6 I/O Panel 4 Headers
Onboard LAN: Gigabit Ethernet Controller \ Realtek RTL 8110SC
Onboard Audio: Realtek ALC883 HD-Audio 8-channel CODEC
Power Connectors: ATX 24-pin, 4-pin EATX 12V
I/O Panel: 1 x Serial \ 1 x PS/2 Keyboard \ 1 x PS/2 Mouse \ 1 x RJ45 \ 6 x USB 2.0/1.1 \ 8-Channel Audio I/O
BIOS Revision: AWARD ip96a614 , 14juin2006

Code:

Test system :

Tforce 965p deluxe  bios 614
E6600 ES step 5  
2* 1go Gskill F2-6400PHU2-2GBHZ
Tuniq Tower 120
Speedstep disable via le bios
fsb voltage 1.4v
nb/sb voltage 1.6v
Vdimm 2.2vbios ,  ~2.11v

9X
http://valid.x86-secret.com/show_oc.php?id=107667

7X
http://valid.x86-secret.com/show_oc.php?id=107672

Super Pi mod 1.5 1M @ 3ghz , DDR2 800mhz bios ,

Super Pi mod 1.5 1M @3379mhz , ddr2 533 bios ,

..i cant change DDR2 timming via bios , It doesnt Boot And I cant see Mem frequence/timing under windows

http://users.skynet.be/pt1t/6600es/3200.PNG

**antoine76** · 07-26-2006, 12:30 AM

Hello Pt1t,

I have two dimms of D9DCN but I don't find how to activate the ECC in the bios of the P5W DH. I have the 701 bios.

Does somebody know how to do ?

Thanks

**Owen1978** · 07-26-2006, 12:36 AM

Whats the max fsb do u think u'd get out of such a basic mobo with a bios update?

**Pt1t** · 07-26-2006, 01:17 AM

Originally Posted by Owen1978

Whats the max fsb do u think u'd get out of such a basic mobo with a bios update?

With old bios , the Gigabyte's motherboard (ds3,4 , dq6) did ~ 380fsb, and now more of 470mhz...
I hope it 'll do the same on biostar tforce

, Bios is first one from 06-14

**Pt1t** · 07-26-2006, 01:20 AM

Originally Posted by antoine76

Hello Pt1t,

I have two dimms of D9DCN but I don't find how to activate the ECC in the bios of the P5W DH. I have the 701 bios.

Does somebody know how to do ?

Thanks

Non , je ne sais pas , sur l aopen il y a avait la fonction

**Owen1978** · 07-26-2006, 05:01 AM

Originally Posted by Pt1t

With old bios , the Gigabyte's motherboard (ds3,4 , dq6) did ~ 380fsb, and now more of 470mhz...
I hope it 'll do the same on biostar tforce

, Bios is first one from 06-14

How hot is the NB @380fsb?

**Pt1t** · 07-26-2006, 07:11 AM

Originally Posted by Owen1978

How hot is the NB @380fsb?

It isnt hot. +- 35° c

**pumero** · 07-26-2006, 11:33 AM

what's that realtek pci gbit controller doing on this mobo?

**Pt1t** · 07-27-2006, 04:57 AM

The bios

**Pt1t** · 08-03-2006, 04:25 AM

I received a new bios from biostar this morning.

http://users.skynet.be/pt1t/biostar/Ip96a803.rar

E6600es Step 5
vcore 1.5v
vdimm 2.2v (bios)
Tuniq tower 120
2*1go Gskill p6400 ..HZ
antec TPII 500w
Matrox millenium II

http://valid.x86-secret.com/show_oc.php?id=109491

quick fsb max with X6
http://valid.x86-secret.com/show_oc.php?id=109492

But i m always looking for good software to overclock in windows , Clockgen and setfsb dont work ...

**pcdoc1** · 08-03-2006, 04:39 AM

Very nice....

**Pt1t** · 08-03-2006, 05:01 AM

Originally Posted by pcdoc1

Very nice....

+ 100mhz fsb with new bios , VFSB and V NB/SB in auto.

Just need a working Clockgen

and

Vdimm mod ^^

**andre X_X** · 08-03-2006, 05:24 AM

on multi 9x, how high fsb do you feel stable to bench 3dmark and spi??

Vdimm mod is a must....

**vapb400** · 08-03-2006, 05:42 AM

holy crap! This is a very very impressive board now!

try systool for overclocking

**Pt1t** · 08-03-2006, 05:51 AM

Originally Posted by vapb400

holy crap! This is a very very impressive board now!

try systool for overclocking

tried ,

I m going to test stability and 3d this week-end , got too much work before

**Gun_Strife** · 08-04-2006, 12:58 AM

now i gotta have one of these too
awesome job
cant wait to see max @9x

**greenwar** · 08-04-2006, 06:36 AM

Pt1t - nice job in testing out the board. One more choice of a possibly low priced performance oriented board. Any idea what sort of caps they are using on the board? I believe in good caps == long lasting reliable board.

Thanks in advance.

**Rol-Co** · 08-04-2006, 07:38 AM

look like a board who got a lot of potential

1,8v on the nb is nice too , 450 fsb @ how much voltage?
somebody know where to buy online in europe?

Thread: Biostar Tforce 965p deluxe

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions