E6600 Step 5 + Intel 975XBX Installed

[Supertim0r]

the bios 1304 is great
I'm dual prime @ 3600mhz, 50% OC, 1.325v, 1.395/1.725...all from bios settings

430fsb is usually the max with an unmodded board ?

[eva2000]

the bios 1304 is great
I'm dual prime @ 3600mhz, 50% OC, 1.325v, 1.395/1.725...all from bios settings

430fsb is usually the max with an unmodded board ?

with mch/fsb volts you need to max them out for 400fsb dual prime ? i'm still using default volts for mch/fsb ..

[Supertim0r]

with mch/fsb volts you need to max them out for 400fsb dual prime ? i'm still using default volts for mch/fsb ..

1.395/1.725 (I don't know if its ok for 24/7)
I'll try default tonight.

[Devious]

the bios 1304 is great
I'm dual prime @ 3600mhz, 50% OC, 1.325v, 1.395/1.725...all from bios settings

430fsb is usually the max with an unmodded board ?

Did you have to do the pen mod to unlock the oc options on bios 1304 ?

[Supertim0r]

Did you have to do the pen mod to unlock the oc options on bios 1304 ?

I couldn't tell, I did the pin mod (conductive ink) when I had a P4 3.0

[Supertim0r]

btw, how are your temps loaded ?

with this : http://www.thecoolest.zerobrains.com...opic.php?t=137

I'm at 58-60c loaded with a TT BT + Sanyo Denki + AS5

[simonmaltby]

I'm at 58-60c loaded with a TT BT + Sanyo Denki + AS5

I thought Conroe was running cool eeek

[freecableguy]

Did you have to do the pen mod to unlock the oc options on bios 1304 ?

argh, for the last time, YES

[NoYd]

btw, how are your temps loaded ?

with this : http://www.thecoolest.zerobrains.com...opic.php?t=137

I'm at 58-60c loaded with a TT BT + Sanyo Denki + AS5

How many volts are you pushing for vcore to achieve that temp? Doesn't sound right to me unless your are overvolting the hell out of it.

On a sidenote, has anyone reported odd heatspreaders on these chips (like not completely flat) similar to what happened to some of the 9xx series chips I think?

[Supertim0r]

How many volts are you pushing for vcore to achieve that temp? Doesn't sound right to me unless your are overvolting the hell out of it.

On a sidenote, has anyone reported odd heatspreaders on these chips (like not completely flat) similar to what happened to some of the 9xx series chips I think?

It's priming @ 1.35v 3.6ghz (its not in a case, open bench...)

My ihs is perfectly flat

[Supertim0r]

argh, for the last time, YES

hey, do you think the sensor are off on the bad axe ?
60c loaded 3.6ghz 1.35v

[freecableguy]

hey, do you think the sensor are off on the bad axe ?
60c loaded 3.6ghz 1.35v

they are off by 15-20C (too high)

[Supertim0r]

they are off by 15-20C (too high)

excellent, thanks !

[uOpt]

My results also indicate 15-20 C too high.

Vcore readings are also off for me.

[eva2000]

E6600 QPGE Step 5/B1 / Intel D975XBX Badaxe rev304 temperatures

Well here's some temperature readings but not sure which is right. Most badaxes owners say bios temps are +10C higher than reality.

@9x266fsb = 2400mhz stock vcore 1.242v

Room temp = 24.8C right now
Bios cpu temp = 30-31C

Windows Idle = 27C/25C for core#1/core#2 most of the time but fluctuates by +3C for both cores at times.



Windows Load (dual stressprime) = 37C/37C for core#1/core#2

click image for larger pic


Will do oc'd temps later

[eva2000]

Does 1333fsb strap really loose this much efficiency for super pi compared to 1067fsb strap ?

At 1067fsb strap with 3443mhz 9x382fsb with 2x256MB Centon @382mhz 4-4-3-15 managed 15min 41s

But now @1333fsb strap with 2x512MB OCZ PC5400 Plat XTC

@9x416fsb with ram @312mhz 3-3-3-8



@9x416fsb with ram @416mhz 4-4-4-15



@9x416fsb with ram @416mhz 4-4-4-12




@9x416fsb with ram @416mhz 4-4-4-10



@9x416fsb with ram @416mhz 4-4-4-8



@9x416fsb with ram @416mhz 4-4-4-4



@9x423fsb with ram @423mhz 4-4-4-8



Yeah i need faster memory for better times!
vcore = 1.441v
mch = 1.725v
fsb bolt = 1.395v
vdimm = 2.2v

[eva2000]

First single vs dual Super Pi 32M run

@3809Mhz (9x423fsb) and ram @423mhz 4-4-4-8

vcore = 1.441v
mch = 1.725v
fsb bolt = 1.395v
vdimm = 2.2v

Single 32M = 15min 05.484s

Dual 32M = 18min 10.734s / 18min 09.438s

[Vice]

Nice job.

Is that a new bracket for your storm? Or does the original one work w/ conroe ?

[eva2000]

conroe = LGA775 so same mounting as other LGA775 cpus

[day187]

thanks for dual

[G H Z]

Here's another dual 32M, nice setup eva

[uOpt]

I'm testing about the same setup at 3.66 GHz.

Storm fits fine with no trouble.

Superpi 1x: 13:38.27 818.27 sec
Superpi 2x: 18:45.26 1125.26 sec + 18:45.26 1125.26 sec

Under Linux 64 bits, so I lack CPUz. I honestly don't know what RAM speed I am on

[day187]

nice results can not wait

[eva2000]

Dual Stressprime 2004 idle and load temps:

Room ambient: 25.3C
CPU idle: 33C/34C
CPU load: 59-60C for both cores

@9x416fsb = 3750Mhz

vcore = 1.441v
mch = 1.725v
fsb = 1.395
vdimm = 2.2v

[matt89]

nice work eva