Kingston DDR2-533 1G X 2 @ DDR2-1008 CL4-4-4-12 2.2V

[ivo0613]

Since couldn't find Team DDR2 locally and worldwide. My disappointment brings me some luck that I found this DDR2. Chips are Micron D9GCT and costs only US$160.

2.2v in all tests.

Micron D9GCT


DDR2-998 CL4-4-4-5 Dual Prime95


DDR2-1000 CL4-4-4-5 Dual SuperPI 32M passed.


DDR2-1000 CL4-4-4-5 Dual memtest over 600%


DDR2-1008 CL4-4-4-12

[5-Clicks]

whoa! Is Kingston back from the dead?

nice sticks! So all Kingston KVR533D2N4/1G sticks have GCT?

[ivo0613]

whoa! Is Kingston back from the dead?

nice sticks! So all Kingston KVR533D2N4/1G sticks have GCT?

No.. mostly Hynix/PSC chips...

[RaMmElEe]

Bravo, real band of the buck indeed. Guess Kingston is not the only one using D9 on their value pack. What else will happen if value pack from other brand meets D9

[ivo0613]

Bravo, real band of the buck indeed. Guess Kingston is not the only one using D9 on their value pack. What else will happen if value pack from other brand meets D9

I think Transcend will have it on BP PCB... Probably will be even better.

Anyway, special thanks to Xtreem_Tech (who's been extrememly polite to a potential customer), Team HK head office and the official agent of Team in Hong Kong...

[TaPaKaH]

I guess the hunt for Kingston value begins ... NOW !!!

[N00B]

SWEet

Any one with Twinmos Value?

[Onepagebook]

well, it just the matter that we are almost release it but you just a bit faster than I will do this weekend

we will have same IC but higher performance on that

[bachus_anonym]

Nice set there and thanks for testing it under some good stress conditions (SP32M, SP2004 and M4W, ivo0613 Being a bit dissapointed by few tests lately with 1M benches only. Thanks again!

Have you tried to see how far would they go at 8-3(or 2)-3-3.0 or maybe more volts?

[guess2098]

got two sticks today, masked with kingston mark on IC, IC size is bigger than D9GCT
DDR2 800 2.3v CL4 almost stable....


so...........................



purchased from mwave

[Onepagebook]

got two sticks today, masked with kingston mark on IC, IC size is bigger than D9GCT
DDR2 800 2.3v CL4 almost stable....


so...........................



purchased from mwave

then you "tsa-sai" lo...bro

I just got the stick from our Team group:
test 512 mb module first for whole set of super pi now for DDR 1030, CL4-4-3: Gonna be team Group Value Xtreem series 667

will annouce later

module: MT D9DCN middle size of D9

[5-Clicks]

lets see some tests OPB! Some D9 is bad, so lets see how these DCN's rank

[Onepagebook]

just done for this dual 32m...cpu air cooled by AC freeze pro 7..1.5v...



how about some improved running..running another set of 1066

[5-Clicks]

very nice indeed! what VDIMM is that on?

[Onepagebook]

intel 304...no mod..so 2.18v measured

[RaMmElEe]

Nice value pack again, good news keep coming. When we can expect they're ready for retail, and how it proform in general for D9DCN

[oijkue]

OMG
D9GCT is a DDR2-533 chip

[ivo0613]

Nice set there and thanks for testing it under some good stress conditions (SP32M, SP2004 and M4W, ivo0613 Being a bit dissapointed by few tests lately with 1M benches only. Thanks again!

Have you tried to see how far would they go at 8-3(or 2)-3-3.0 or maybe more volts?

3-3-3-8 at 2.3v can do DDR2-790... I forgot to save the screenie, will test again and post you an update.

[ivo0613]

then you "tsa-sai" lo...bro

I just got the stick from our Team group:
test 512 mb module first for whole set of super pi now for DDR 1030, CL4-4-3: Gonna be team Group Value Xtreem series 667

will annouce later

module: MT D9DCN middle size of D9

wow.... I want a pair of 2GB kit if price is around US$160 and available in Hong Kong.

[Onepagebook]

so 5 hours dual prime would do it?

[bachus_anonym]

@OPB,

Kevin, don't use 1333fsb strap and 4:5 ratio on BadAxe. It's whacked! Hipro5 said in in the other thread that at those BIOS settings, memory is almost 100% confirmed to be running 1:1 with FSB, not 4:5

EDIT: I just think, that all BadAxe users that are testing memory, should stick with 1066fsb strap for now. I'm 100% sure that If you compare 350x8 (1066fsb) with 350x8 (1333fsb) and 4:5 you will get different results from benchmarks, worse on 1333fsb... Try it for yourself, please.

[Onepagebook]

Thank you very much michael; I will email Intel regarding this is whacked and I will look into it.

[ivo0613]

mobo changed to DFI 975X/G with 06/21 beta BIOS.
2.3V in BIOS, Smart Guardian showed 2.35v.

[eva2000]

@OPB,

Kevin, don't use 1333fsb strap and 4:5 ratio on BadAxe. It's whacked! Hipro5 said in in the other thread that at those BIOS settings, memory is almost 100% confirmed to be running 1:1 with FSB, not 4:5

EDIT: I just think, that all BadAxe users that are testing memory, should stick with 1066fsb strap for now. I'm 100% sure that If you compare 350x8 (1066fsb) with 350x8 (1333fsb) and 4:5 you will get different results from benchmarks, worse on 1333fsb... Try it for yourself, please.

i thought that is due to the less agressivenss of the MCH settings at 1333fsb to allow fsb to clock higher at least on badaxe... why else would at 1333fsb strap 1:1 is slower than 1333fsb strap 4:5 ?

i am on 1333fsb strap and one set of my ddr2 max at around 423-426mhz at 2.2v on badaxe, when i tried 4:5 with 346fsb for 433mhz ram it wouldn't boot so i think 4:5 is indeed working

[thorgal]

These are all really something to be jealous about

I've also been looking for teamgroups or some other decent 2Gb kit that doesn't cost $500 Hard to find here in Belgium though.