2x1GB/1x1GB OC Database

[nachthymnen]

Can you UP my result?
I'm first with UCC
TKS

[Xevipiu]

Very nice.

308 mmm he improved his results

Regards and kisses in the nipples!

[ewitte]

Nachthymnen: TEAMGROUP PC4000 Samsung UCC

SPI 32M @ 296(DDR592MHZ) 3/4/4/8 2.7V


Validtor:
http://valid.x86-secret.com/show_oc?id=67913

Why is the time so high I got almost a minute lower at 290x10 on my OCZ EL (3-4-3-8-1T). Your cpu is running 60Mhz faster and memory 6Mhz faster.

[Ferry82]

Yes sure its a good setting ,but you havent an Expert mb...this is more difficult to oc!

Dont know why you keep saying Expert is more dificult?

So tell me.

[Kunaak]

Heres Some Corsair XMS PC4000 PT. Samsung UCC.

299 at cas 3-4-4--8-1T.

Nice Cheap Ram too... only $220 at newegg.

Validation Link.
http://valid.x86-secret.com/show_oc?id=68531

http://www.xtremesystems.org/forums/...postcount=1362

[nachthymnen]

Why is the time so high I got almost a minute lower at 290x10 on my OCZ EL (3-4-3-8-1T). Your cpu is running 60Mhz faster and memory 6Mhz faster.

No optimizations on the OS...when windows is started I have launch SPI...sometimes on SPI 32M my total times change of many seconds...20 or 30 seconds from a run and another...

[nachthymnen]

Another UP...
Nachthymnen: 2x1GB Teamgroup pc4000 Samsung UCC

SPI 32M @ 297(DDR594MHZ) 3/4/4/8 T1 2.8V


http://valid.x86-secret.com/show_oc?id=68560

Not bad for UCC chip

[joe.latino]

Hi! for now with expert and ballistix i cant get about 300*10,why ?
Max results also with hight times are 299*9 and 275*10 sinc....
With asinc times cant getter better results while with 8x get about 315/180
Thanks

ps what result have you with 3dmark05/06? mine are 9360 and 5170 max (for now)

[ewitte]

No optimizations on the OS...when windows is started I have launch SPI...sometimes on SPI 32M my total times change of many seconds...20 or 30 seconds from a run and another...

Gotcha. I'm killing all the other processes and setting the priority to realtime.

[Barr3l Rid3r]

Another UP...
Nachthymnen: 2x1GB Teamgroup pc4000 Samsung UCC

SPI 32M @ 297(DDR594MHZ) 3/4/4/8 T1 2.8V


http://valid.x86-secret.com/show_oc?id=68560

Not bad for UCC chip

Wich bios?

I don't know why I can't get my Corsair UCCC memtest stable (after 4 passes) at 250Mhz. But it goes all the way up to 280Mhz

trc = 7 refuse to work I'm using TRC = 16 and trfc = 17 and it don't seem stable.

Last official DFI Bios N14-B 9ms/6.5ns...

Help....

[perry_78]

Heres Some Corsair XMS PC4000 PT. Samsung UCC.

299 at cas 3-4-4--8-1T.

Nice Cheap Ram too... only $220 at newegg.

Insane

[Xevipiu]

Which is the record 32m?

¿310 WR???

[nachthymnen]

Wich bios?

I don't know why I can't get my Corsair UCCC memtest stable (after 4 passes) at 250Mhz. But it goes all the way up to 280Mhz

trc = 7 refuse to work I'm using TRC = 16 and trfc = 17 and it don't seem stable.

Last official DFI Bios N14-B 9ms/6.5ns...

Help....

Hi,I'm using the official 623-3
With Micron B5 it's bad...need the 702-1...

[TH€_BR@!N]

System:
- DFI nF4 SLI-DR @ OCZ moddet Bios 704-2BTA
- AMD 64 3700+ San Diego E4 0548 BPMW @ 11x - 3135Mhz @ 1,504v

First:

TH€_BR@!N | 2x1GB OCZ PC4000EB Platinum - Infineon CE-6 | 3-3-2-8 1T @ 287MHz | 3.0v | Link! - SPi 32M Stable: Yes

Super PI:
http://img411.imageshack.us/my.php?i...bythbrn4cf.jpg

CPU-Z:
http://valid.x86-secret.com/show_oc?id=72808

Second:

TH€_BR@!N | 2x1GB OCZ PC4000EB Platinum - Infineon CE-6 | 2,5-3-2-6 1T @ 259MHz | 3.0v | Link! - SPi 32M Stable: Yes

Super PI:
http://img302.imageshack.us/img302/1...3vthbrn2rh.jpg

CPU-Z:
http://valid.x86-secret.com/show_oc.php?id=72776



* (VDIMM of 2.9V ± 5% without invalidating their OCZ Lifetime Warranty.)

2,6v = ~267Mhz
2,7v = ~273Mhz
2,8v = ~278Mhz
2,9v = ~282Mhz
3,0v = ~287Mhz

[Rukee]

I`ll add my G.SKILL kit I just got last week.

Rukee | 2x1GB G.Skill Extreme Series F1-4000USU2-2GBHZ - Samsung UCCC | 3-4-4-6 1T @ 285MHz | 2.70v | Link! - SPi 32M Stable: Yes

[napass]

hi this is my best result with my Crucial Ballistix Z503

300mhz 3-3-3-8 2.83v

napass | 2x1GB Crucial Ballistix z503 - Micron -5B D | 3-3-2-8 1T @ 300MHz | 2.83v | <a href="http://valid.x86-secret.com/show_oc?id=69314" target="_blank">Link!</a> - SPi 32M Stable: <a href="http://img37.imageshack.us/img37/7758/300x833382813924bb.jpg" target="_blank">Yes</a>

with AMD Athlon 64 3700+ San Diego Cooled By Thermaltake Big Typhoon and DFI Lanparty UT nF4 Ultra-D powered by OCZ ModStream 520w

bye bye !!!

[OTT]

Hi!

Can someone post the most stable settings for Ballistix 2x1Gb @ 270-280 Mhz with this setup?

DFI Expert / 12-07-2005 Bios / Opteron 175 0550 UPMW

Please!

Thanks in advance

[windwithme]

windwithme | 2x1GB GSkill 2GBHZ- Samsung UCCC | 3-4-4-8 1T@ 305MHz | 2.6v | Link! - SPi 32M Stable: Yes

with AMD 939 Opteron 144



AMD 939 Opteron 144
DFI LANParty SLI-DR Venus
GSkill 2GBHZ DDR610 1T 2 4-4-8 2.6V

[TH€_BR@!N]

is this thread death?
the last update frome post 1 it`s over 30day ago... ( Last edited by EnJoY : 01-10-2006 at 10:53 PM)

[alpha0ne]

is this thread death?
the last update frome post 1 it`s over 30day ago... ( Last edited by EnJoY : 01-10-2006 at 10:53 PM)

Hehe yes nearly a month now, I am waiting for my HZ to be added for a couple of weeks

[TH€_BR@!N]

i have send him pm ---> and say: "if you need help on this thread, you get it from me ". But no answer...
but i have a idea... i post it after work.

[EnJoY]

Relax guys, it had been a lot longer before I updated the last time, this is nothing. I apolgise, but I have been very busy and it takes some time to post in all the updates I receive. It'll be done soon, no worries...

[lobotronic]

244 MHz - 2 x 1 GB Samsung uccc + 1 x 512 MB TwinMOS BH5@ 3.0-3-3-9 @ 2,80 V / ABIT NF7-S 2.0 / Athlon XP Barton 2600+ @ 244 MHz x 9,5 / CPUz Valid

[OTT]

Someone can help me?

I can't get my Ballistix 2x1Gb stable @ 270 1:1 1T

My spec:

Opteron 175 0550 UPMW

DFI Expert 12/07/2005 Bios

I have tried many settings and voltages:

Stangely, seems that relax the timings does not help at all, instead the modules are more stable with tight timings! (3-3-3-8 works better than 3-4-4-8)

Another odd thing is that when i raise the voltage a bit the module are MORE unstable than with previous voltage BUT if i add a little more i regain more stability

Ex: I start with 2,63 V: the system boot but MemTest show errors---> then I raise up to 2,69 and the system crash(!!!)...then i raise to 2,74 and the system go as 2,63 ---> it seems like these DRAM have "sweet fix voltages" and setting anything between one and the next, go wrong!

By default the BIOS set Tref @ 3120 (200/15,6), i have tried many others with no good result (200/3,9 - 166/3,9 - 166/1,95...)

Both Idle Cycle @ 16 and 256 tried and even relaxing Max Async and Read Preamble not help

I have tried 5 / 1 Drive-Data stenght also, no result

The best achieved so far is with this setting:

TCL 3
TRC 12
TRFC 24
TRCD 3
TRRD 3
TRAS 8
TRP 3
TWR 3
TWTR 2
TRTW 3
TREF 3120 (200/15,6)
TWCL 1

DQS SCREW MODE Auto (Off)
" " VALUE 0

R/W QUEUE BYPASS 16x
BYPASS MAX 7x
MAX ASYNC 8
READ PREAMBLE 6
IDLE CYCLE LIMIT 256
DYNAMIC COUNTER Disable

DRIVE STRENGHT Auto
DATA STRENGHT Auto
32 BYTE GRANULARITY Disable

A64 Tweaker show that Mem Clock 2&3 are DISABLED but i have seen in many picture posted that all four Mem Clock are usually enabled...what this mean?

My system boot and pass MemTest (800 MB) for 3 cycles (300%) but around 350% errors shows up

All this with 2,77 Volts...with less the system crash

My CPU is setted @ 9x and 1,4 V just to make sure this mess isn't related to processor, the LDT/FSB is 2,5x: raise Chipset & LDT voltage does not help


Any idea would be VERY APPRECIATED

[joe.latino]

hi!
try this setting....